• Bulletin of the Korean Chemical Society
• /
• 제32권2호
• /
• pp.451-454
• /
• 2011

The traditional BCS superconductors $AOs_2O_6$ (A=K, Rb, and Cs) were investigated to find the relationship between their structures and superconducting transition temperatures. The $T_c$ decreases with increasing the unit cell parameter of $AOs_2O_6$. This is in contrast to the case of conventional BCS superconductivity in a single bond model, where $T_c$ may increase with increasing the the unit cell parameter since the DOS at Fermi level increases as the unit cell parameter increases. Instead, the $T_c$ of a $\beta$-pyrochlore oxide is proportional to the lattice softness of the compound.

• Bulletin of the Korean Chemical Society
• /
• 제29권9호
• /
• pp.1769-1773
• /
• 2008

fThe kinetics and mechanism of the reactions of Y-O-aryl phenylphosphonochloridothioates with X-pyridines are investigated in acetonitrile at 35.0 ${^{\circ}C}$. The negative value of the cross-interaction constant, $\rho$XY = −0.46, indicates that the reaction proceeds by concerted $S_N2$ mechanism. The observed $k_H/k_D$ values involving d-5 pyridine ($C_5D_5N$) nucleophiles are greater than unity (1.05-1.11). The net primary deuterium kinetic isotope effects, $(k_H/k_D)_{net}$ = 1.28-1.35, excluding the increased $pK_a$ effect of d-5 pyridine are obtained. The transition state with a hydrogen bond between the leaving group Cl and the hydrogen (deuterium) atom in the C-H(D) is suggested for the studied reaction system.

• 한국결정성장학회지
• /
• 제8권1호
• /
• pp.169-178
• /
• 1998

CaO-$SiO_2-P_2O_5$ 3성분계 유리화 영역(glass forning region)내의 여러조성(A:$SiO_2$- rich조성, B:CaO-rich조성, C:$P_2O_5$-rich조성, D, E:A, B, C의 중간조성)을 가지는 유리분말을 결정화시켰을 때 유리중에 석출되는 결정상(crystal phase)을 분말 XRD로 확인하였다. 여러조성중 apatite(($Ca_{10}(PO_4)_6O$)와 $\beta$-wollastonite($CaSiO_3$)결정이 석출되고, 굽힘강도가 우수한 E조성(CaO 49.4, $SiO_2\;36.8,\;P_2O_5$8.8wt%)을 선택하여 이 조성의 유리분말을 일방향으로 결정화 소결하였다. 제조된 결정화 소결체에 대하여 charaterization을 하고 굽힘강도를 측정하였다. 또한 결정화 소결체와 생체뼈와의 결합성을 조사하기 위하여 유사체액(simulated body fluid)내에서 침적실험을 하였으며, 결정화 소결체의 표면을 thin-film XRD, FT-IR로 분석하였다. 실험결과, apatite와 wollastonite 결정이 석출된 치밀한 결정화 소결체가 얻어졌으며, 이들 결정은 wollastonite 결정의 (202)면이 인상방향에 수직으로 성장하는 경향을 보였다. 또한 제조된 결정화 소결체는 평균 186.9MPa의 굽힘강도를 나타내어 일반적 방법으로 제조되는 결정화 소결체보다 높은 역학적 성질을 보였다. 유사체액내의 침적실험결과, 시료표면위에 apatite 결정층이 3일후부터 형성되어 생체뼈와 화학결합을 이룰 가능성이 있음을 알았다.

• 대한화학회지
• /
• 제34권6호
• /
• pp.517-526
• /
• 1990

D-glucitol hexaacetate 와 xylitol pentaacetate의 결정구조를 단결정 X-선 회절법으로 연구하였다. D-glucitol hexaacetate 는 공간군 P2$_1$, 단위세포 상수는 a = 10.275 (2), b = 8.363 (1), c = 12.560 (5) $\AA$, $\beta$= 95.97 $(2)^{\circ}$; Z = 2이고, xylitol pentaacetate는 공간군이 P2$_1$/C이고, a = 18.126 (1), b = 11.422 (2), c = 8.649 (1) $\AA$, $\beta$ = 95.03 $(1)^{\circ}$이며 Z = 4이다. 회절세기는 diffractomerer로 얻었고, 분자구조는 직접법으로 밝혔으며, 최소자승법으로 정밀화하였다. 두 분자에 결쳐 결합의 평균길이는 C($sp^3)-C(sp^3$)가 1.514 (10), C($sp^3)-O: 1.444 (6),\; C(sp^2)-O: 1.347 (9),\; C(sp^2)=O: 1.197 (6),\; C(sp^2)-C(sp^3): 1.479(9){\AA}$이고, 평균 결합각도는 C($sp^3)-C(sp^3)-C(sp^3): 114.6 (17),\; O-C(sp^3)-C(sp^3): 109.4 (23),\; C(sp^2)-O-C(sp^3): 117.4 (6),\; O=C(sp^2)-O: 122.6 (6),\; C(sp^3)-C(sp^2)-O: 111.8 (7), C(sp^3)-C(sp^2)=O: 125.5 (4)${\circ}$이다. 두 분자내의 탄소 사슬들은 extended zigzag chain으로 되어 있어 D-glucitol과 xylitol 분자들의 conformation과는 다르다. Acetate group들의 각 원자들은 모두 한 평편상에 놓여있다.

• 통합자연과학논문집
• /
• 제7권3호
• /
• pp.149-158
• /
• 2014

The crystal structure of the title compounds with both coumarin and sulfonamide moieties were examined. These two groups have very special for their pharmaceutical and medicinal properties have been determined from single crystal X-ray diffraction data. In the title compound crystallizes in the monoclinic space group $P2_1/c$ with unit cell dimension a=$8.5775(4){{\AA}$, b=$24.9943(13){\AA}$ and c=$13.7319(7){\AA}$ [alpha & gamma=$90^{\circ}$ beta=$103.558(2)^{\circ}$]. In the structure The S1 atom shows a distorted tetrahedral geometry, with O1-S1-O2 [$121.08(1)^{\circ}$] and N1-S1-C5 [$105.85(1)^{\circ}$] angles deviating from ideal tetrahedral values are attributed to the Thrope-Ingold effect. The sum of bond angles around N1 ($354.9^{\circ}$) indicates that N1 is in $sp^2$ hybridization. The Pyridine ring adopts boat conformation and pyran rings adopt a sofa conformation. Crystal structure is stabilized by C-H...O intra molecular hydrogen bond interactions.

• 대한화학회지
• /
• 제37권4호
• /
• pp.423-430
• /
• 1993

$trans-PdEt_2(PMe_3)_2$와 styrene을 반응시켜 얻어진 $Pd(PMe_3)_2$(styrene)에 methacrylic acid와 trans-crotonic acid를 각각 반응시켜 새로운 팔라듐(O)-올레핀착물로서 $(PMe_3)_2Pd{CH_2=C(CH_3)COOH}$와 (PMe_3)_2Pd{(CH_3)CH=CHCOOH}$를 합성하고, 구조와 특성을 원소분석, IR 및 $^1H-,\;^{13}C-,\;^{31}P-NMR$ 등의 분광학적 방법으로 조사하였다. methacrylic acid 와 trans-crotonic acid에 존재하는 올레핀의 이중결합은 팔라듐(O)에 ${\pi}$-결합을 형성하였고, 카르복실산은 팔라듐에 결합되지 않았음을 알게되었다. 그리고 동일한 반응에서 metallacycle을 형성하는 3-butenoic acid와 비교 검토하였다.

• 대한치과보철학회지
• /
• 제43권4호
• /
• pp.426-437
• /
• 2005

Statement of problem : Although zirconium oxide ceramics are more and more commonly used in restorative dentistry, for many clinical applications only limited data can be found in the literature. However it is quite clear that hydrofluoric acid etching is impossible with zirconia ceramics. Therefore, other bonding techniques are required in order to lute these materials adhesively. Purpose : The purpose or this study was to evaluate the effects of surface treatments on shear bond strengths between two resin cements and a zirconia ceramic. Materials and methods : Experimental industrially manufactured yttrium-oxide-partially-stabilized zirconia ceramic discs (Adens, Korea) were used for this study. The ceramic specimens divided into five experimental groups and a control group (as received). Five surface treatments were studied 1) sandblasting with 110$\mu$m $Al_2O_3$ at 3 bars pressure 13 seconds at a distance of 10 mm, 2) flame-treated with the Silano-Pen for 5 $s/cm^3$, 3) grinding with a diamond bur. 4) sandblasting + Silano-Pen treatment, 5) diamond bur preparation + Silano-Pen treatment. Acrylic plastic tube (5 mm in height and 3 mm in diameter) were filled with composite to fabricate composite cylinders The composite cylinders were bonded to the ceramic specimens with either Superbond C&B or Panavia F resin luting agents. All cemented specimens were tested under shear loading until fracture on universal testing machine at a crosshead speed 1mm/min; the maximum load at fracture was recorded. Sheat bond strength data were analyzed with oneway analysis of variance and Tukey HSD tests (P<.05). Treated ceramic surfaces and fracture surfaces after shear testing were examined morphologically using scanning electron microscope. Results: Ceramic surface treatment with Silano-Pen after sandblasting improved the bond strength of Superbond C&B resin cement. Supevbond C& B resin cement at Silano-Pen aiker sandblasting($27.4{\pm}3.8MPa$) showed statistically higher shear bond strength than the others. Conclusion: Within the limitation of this study, Superbond C& &B resin cement are suitable for cementation of zirconia ceramics and flame-treated with the Silano-Pen after sandblasting is required to enhance the bond strength.

• Bulletin of the Korean Chemical Society
• /
• 제27권1호
• /
• pp.106-110
• /
• 2006

Photocatalytic electron transfer reactions of aryl benzyl sulfides using 2,4,6 triphenylpyrilium tetrafluoroborate ($TP^+BF_4^-$) resulted in the oxidation of these sulfides to the corresponding sulfoxides and also in most cases in the C-S bond cleavage of them along with formation of aromatic aldehydes. In these reactions, the formation of sulfide radical cation has been proposed, which undergoes either oxidation to the corresponding sulfoxide or C-S bond cleavage to the formation of aromatic aldehydes. The further oxidation of sulfoxides to sulfones has not been observed. The influence of substrate structures on the reaction pathways as well as the role of $O_2$ in this respect is discussed.

• Bulletin of the Korean Chemical Society
• /
• 제17권12호
• /
• pp.1123-1127
• /
• 1996

Crystalline compound RbV2SeO7, a Rb analogue of KV2SeO7, was synthesized from a hydrothermal reaction of V2O5, V2O3, SeO2, and Rb2CO3 in the mole ratio 3: 1: 15: 6 (in millimoles) at 230℃. RbV2SeO7 crystallizes in an orthorhombic space group Pnma (No. 62) with a=18.444(8), b=5.415(3), c=7.070(4) Å, Z=8. The two structures of KV2SeO7 and RbV2SeO7 are almost the same except that bond lengths in the latter are slightly longer than in the former. The magnetic susceptibility measurement for RbV2SeO7 in the temperature range 4-300 K showed an antiferromagnetic ordering with TN=45 K, higher than that for KV2SeO7 of 27 K. The origin of the magnetic coupling and the different ordering temperatures in the two phases are discussed in relation to the crystal structures.

• 대한화학회지
• /
• 제26권5호
• /
• pp.296-303
• /
• 1982

수용액 속에서 1-페닐-2-아세트아미도-3-부탄온의 용해도를 20, 30, 40$^{\circ}$C 에서 또 1kg/$cm^2$에서 4500 kg/$cm^2$까지의 압력에서 측정하였다. 압력이 커질수록 용해도는 감소한다. 이러한 용해도 변화는 디케토피페라진과 아주 비슷하다. 디케토피페라진이 펩타이드 결합의 모델 화합물이라는 점과 1-페닐-2-아세토아미도-3-부탄온이 한개의 펩타이드 결합과 상당히 큰 소수성 작용기를 가졌다는 점을 고려할 때 이와 같은 용해도 변화는 예상 밖이다. 부피 변화와 열용량 변화에 대한 값은 이상하다고 할 정도는 아니었다.