• Korean journal of food and cookery science
• /
• v.14 no.4
• /
• pp.327-332
• /
• 1998

In the fermentation of Yulmoo Mulkimchi, various ratios of Yulmoo to water (l/l.14, l/l.5, 1/2, l/2.75, 1/4) were prepared and fermented at 4$^{\circ}C$, 15$^{\circ}C$, 25$^{\circ}C$ for up to 10 days. According to the fermentation time, the pH, acidity, total vitamin C content and microbial growth in Mulkimchi samples were determined together with sensory evaluation. Fermentation temperature on water addition ratio didn't show any difference in pH and microbial growth of Mulkimchi. However, low ratio of water resulted in high acidity and vitamin C content in Mulkimchi. In terms of acid odor and acid taste, the least water addition (l/l.4) sample was significantly strong than those of other samples. The ratio of Yulmoo to water, l/2 showed the highest overall sensorial acceptability and followed by l/l.5, l/l.4, l/2.75 and 1/4 samples. It was found that the content of vitamin C and acid taste of Mulkimchi have correlation with its acceptability.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.12
• /
• pp.4161-4164
• /
• 2012

Density functional MO calculations for the methylsilole anion of $[C_4H_4SiMe]^-$ and methylgermole anion of $[C_4H_4SiMe]^-$ at the B3LYP (full)/6-311+$G^*$ level (GAUSSIAN 94) were carried out and characterized by frequency analysis. The ground state structure for the methylsilole anion and methylgermole anion is that the methyl group is pyramidalized with highly localized structure. The difference between the calculated $C_{\alpha}-C_{\beta}$ and $C_{\beta}-C_{\beta}$ distances are 9.4 and 11.5 pm, respectively. The E-Me vector forms an angle of $67.9^{\circ}$ and $78.2^{\circ}$ with the $C_4E$ plane, respectively. The optimized structures of the saddle point state for the methylsilole anion and methylgermole anion have been also found as a planar with highly delocalized structure. The optimized $C_{\alpha}-C_{\beta}$ and $C_{\beta}-C_{\beta}$ distances are nearly equal for both cases. The methyl group is located in the plane of $C_4E$ ring and the angle between the E-Me vector and the $C_4E$ plane for the methylsilole anion and methylgermole anion is $2.0^{\circ}$ and $2.3^{\circ}$, respectively. The energy difference between the ground state structure and the transition state structure is only 5.1 kcal $mol^{-1}$ for the methylsilole anion. However, the energy difference of the methylgermole anion is 14.9 kcal $mol^{-1}$, which is much higher than that for the corresponding methylsilole monoanion by 9.8 kcal $mol^{-1}$. Based on MO calculations, we suggest that the head-to-tail dimer compound, 4, result from [2+2] cycloaddition of silicon-carbon double bond character in the highly delocalized transition state of 1. However, the inversion barrier for the methylgermole anion is too high to dimerize.

• Journal of the Korean Chemical Society
• /
• v.15 no.3
• /
• pp.133-145
• /
• 1971

A method of theoretical calculation of the thermodynamic properties for liquid-vapor interface of binary solution is developed according to the transient state theory of significant liquid structure. The surface tensions, the adsorbed amounts at the liquid-vapor interface and the activity coefficients of the components for the solutions of $C_6H_{12}-C_6H_6$ $CCI_4-C_6H_6$, $CHCl_3-C_6H_6$, $CHCl_3-CCl_4$, $CCl_4-CS_2$ are calculated through the full ranges of the compositions.

• Journal of Powder Materials
• /
• v.10 no.1
• /
• pp.57-62
• /
• 2003

The effect of bedding on the microstructure of $Si_3N_4$ added with ultra-fine SiC was investigated. The bedding and the addition of ultra-fine SiC effectively inhibited grain growth of $Si_3N_4$ matrix grain. The microstructures of the specimens sintered with bedding powder consisted of fine-grains as compared with the specimens sintered without bedding powder. In addition, the grain size and the difference of grain size between the specimens sintered with bedding and without bedding was reduced with increasing SiC content. Some ultra-fine SiC particles were trapped in the $Si_3N_4$ grains growed. The number of SiC particles trapped in the $Si_3N_4$ grains increased with increasing the grain growth. When ultra-fine SiC particles were added in the $Si_3N_4$ ceramics, the strength was improved but the toughness was decreased, which was considered to be resulted from the decrease of the grain size.

• Korean Journal of Crystallography
• /
• v.11 no.1
• /
• pp.46-51
• /
• 2000

The molecular structures of 2-SC₄H₃CH=NN(H)C/sub 6/H/sub 5/(C/sub 11/H/sub 10/N₂S) and (GaMe₂)₂(2-SC₄H₃CH=NNC/sub 6/H/sub 5/)₂(C/sub 26/H/sub 30/Ga₂N₄S₂) have been determined by X-ray diffraction. Crystallographic data for 2-SC₄H₃CH=NN(H)C/sub 6/H/sub 5/:orthorhombic space group P2₁2₁2₁, a=6.108(1)Å, b=7.593(1)Å, c=22.356(2)Å, V=1037.1(3)ų, Z=4, R=0.0613. Crystallographic data for (GaMe₂)₂(2-SC₄H₃CH=NNC/sub 6/H/sub 5/)₂:monoclinic space group P2₁/n, a=15.996(2) Å, c=9.879(3)Å, β=100.07.(2)°, V=2764.599)ų, Z=4, R=0.0503.

• Journal of Korea Foundry Society
• /
• v.25 no.2
• /
• pp.80-87
• /
• 2005

The microstructure and mechanical property of the Ni and Ni-Cr porous metal reinforced AC4C matrix composites fabricated by squeeze casting were investigated. In this study Ni, Ni-Cr porous metals which are estimated to be easy to fabricate by squeeze casting are used as strengtheners for composite materials. As a matrix material, Al-7wt.%Si-0.3wt.%Mg(AC4C) has been used. In case of Ni/AC4C and Ni-Cr/AC4C composite, $750^{\circ}C$ melt temperature and minimum 25MPa squeezing pressure are needed to produce sound composite materials. The observation of interfacial reaction zone at various heat treatment condition shows that atsolutionizing temperature of above $520^{\circ}C$, the interfacial reaction zone increases proportionally with heat treatment time and the reaction products formed by interfacial reactions are mainly composed by $Al_{3}Ni$ and $Al_{3}Ni_{2}$ phases.

• Korean Chemical Engineering Research
• /
• v.50 no.3
• /
• pp.527-534
• /
• 2012

The adsorption dynamics of activated carbon (AC) and carbon molecular sieve (CMS) beds were studied to recover ethylene from FCC fuel gas. In this study, the FCC fuel gas used consisted of six-component mixture ($CH_4/C_2H_4/C_2H_6/C_3H_6/N_2/H_2$,32:15:14:2:12:25 vol.%). And the breakthrough experiments of adsorption and desorption were carried out. The breakthrough sequence in the AC bed was $H_2$ < $N_2$ < $CH_4$ < $C_2H_4$ < $C_2H_6$ while the sequence in the CMS bed was $H_2$ < $CH_4$ < $N_2$ < $C_2H_6$ < $C_2H_4$. The separation performance of the CMS bed during the adsorption step was lower than that of the AC bed. However, due to the characteristics of kinetic separation, the CMS bed could remove $CH_4/N_2$ as well asthe molecules that are larger than $C_2H_6$, which was not easy to be done by the AC bed. Since it was hard to regenerate the adsorption bed by simple depressurization, vacuum regeneration should be adopted. As a result, the pressure vacuum swing adsorption (PVSA) process, consisting of CMS pretreatment process and AC main process, was suggested to recover ethylene efficiently.

• Journal of the Korean Chemical Society
• /
• v.15 no.6
• /
• pp.312-317
• /
• 1971

The interactions of aniline, o-toluidine, o-ethylaniline and o-chloroaniline with iodine in carbon tetrachloride solution have been examined through spectrophotometric measurements. The results indicate that both aniline and the o-substituted anilines examined form one-to-one complexes with I2in solution. The formation constants of the complexes measured at room temperature are 12.8, 9.31, 3.15 and 0.576 l $mole^{-1}$, respectively. Comparison of these results with previous experimental results indicates that the relative stabilities of the $I_2$-amine complexes decrease in the following order: $C_6H_5N(C_2H_5)_2 >C_6H_5N(CH_3)_2 >C_6H_5NH_2 >o-CH_3C_6H_4NH_2 >o-C_2H_5C_6H_4NH_2 >o-ClC_6H_4NH_2$. This may support the conclusion that the relative stabilities of these complexes are explained by the inductive effect and steric hindrance of the substituents.

• Applied Biological Chemistry
• /
• v.49 no.2
• /
• pp.108-113
• /
• 2006

This study was conducted to analyze the acidity and turbidity changes of immersion solutions as well as changes in aerobic bacteria, E. coli, anaerobic bacteria, yeast and mold counts of mulberry leaf soybean curds during storages at $4^{\circ}C$ and $25^{\circ}C$ in different immersion solutions such as distilled water, grapefruit seed extract (300 ppm) and alkaline ionic water. The acidities of immersion solutions of distilled water, grapefruit seed extract and alkaline ionic water after 18 days of storage at $4^{\circ}C$ were 0.021, 0.008 and 0.002%, respectively. After 5 days of storage at $25^{\circ}C$ were 0.042, 0.029 and 0.009%, respectively. The turbidities of the above mentioned immersion solutions were 0.50, 0.29 and 0.21 after 18 days of storage at $4^{\circ}C$ and 0.38, 0.34 and 0.27, respectively, after 5 days of storage at $25^{\circ}C$. The acidity and turbidity changes of immersion solutions were sensitive to storage temperatures. The aerobic bacteria count of mulberry leaf soybean curds after 18 days of storage at $4^{\circ}C$ was still below $10^7\;CFU/g$, the beginning point of soybean curd putrefaction; in contrast, this value was reached within one day in distilled water at $25^{\circ}C$ and between 2 and 3 days in alkaline ionic water. Grapefruit seed extract and alkaline ionic water had a better preservative effect at $4^{\circ}C$ than at $25^{\circ}C$ storage temperature.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.9
• /
• pp.405-411
• /
• 2019

In this study, tensile tests were carried out on materials (A516-60, A283-C, A285-C, and SB410) for structural and pressure vessels at temperatures of $20^{\circ}C$, $-20^{\circ}C$, and $-40^{\circ}C$, and the changes in the mechanical properties were analyzed. Compared to the results at $20^{\circ}C$, the average yield stress increased by 6.4% and 7.5% at $-20^{\circ}C$ and $-40^{\circ}C$ for A516-60, while the average tensile stress increased by 1.3% and 4.1%, respectively. The average elongation decreased by 4.7% and 20.4% at these temperatures. In the case of A283-C, the average yield stress increased 8.8% and 9.8%, the average tensile stress increased by 4.1% and 5.9%, and the average elongation rate decreased by 7.4% and 9.9% at $-20^{\circ}C$ and $-40^{\circ}C$, respectively. For A285-C, the average yield stress increased by 1.8% and 8.6%, and the average tensile stress increased by 2.6% and 5.3%, respectively, but there was little change in the average elongation. Finally, for SB410, the average yield stress increased by 7.1% and 11.8%, the average tensile stress increased by 4.3% and 5.5%, but the average elongation rate decreased by 8.7% and 13.5%, respectively.