• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.41 no.10
• /
• pp.97-102
• /
• 2004

In this paper, a new predistorter controlling modified individual order jntermodulation distortion signals is proposed. The proposed predistorter generates and controls predistorted third and high order IM signals independently. Using predistorted signals, jntermodulation distortion signals of power amplifier are suppressed effectively. The predistortion linearizer has been implemented to operate in Korean PCS basestation transmitting band (1840～1870MHz). The test results show that IMD3 and IMD5 (C/I) of power amplifier are improved more than 40dB and 23dB for CW two tone signals, respectively. The predistorter improves the adjacent channel power ratio (ACPR) more than 10dB at 885KHz offset point for CDMA (IS-95) signals.

• The KIPS Transactions:PartC
• /
• v.9C no.4
• /
• pp.523-530
• /
• 2002

Earlier efforts on optical access concentrated on the design of PONs for the collection and distribution portion of the access network. PON architecture is very simple but it requires MAC protocol for control of upstream traffic. This paper proposes a MAC protocol for a broadband access network using an ATM Passive Optical Network supporting CBR/rtYBR, nrtYBR, UBR and ABR traffic. For the proposed MAC scheme, we present grant field format, minislot format, and bandwidth allocation algorithm. From the simulation result, we have confirmed that our proposed scheme can reduce the average cell delay in comparison to that of conventional MAC schemes.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.11
• /
• pp.1176-1183
• /
• 2003

In this paper, miniature voltage-controlled oscillator(VCO) for 1.6 ㎓ PCS band is designed and implemented using the LTCC technique. Circuit level design using commercial components is performed, and passive L, C elements embedded in LTCC substrate is optimized by simulation tools. Embedded passive components are modeled into equivalent circuits and their circuit parameters are extracted for circuit simulation. Utilizing the designed embedded passive elements and 21 layers LTCC substrate, VCO with 4.0${\times}$4.0${\times}$1.6 ㎣ dimensions is designed and fabricated. Developed VCO operates in 2.7 V with 8.5 ㎃ current consumption. The phase noise performance of VCO is below -112.61 ㏈c/㎐ at 100 ㎑ offset and harmonic suppression characteristics is measured above -30 ㏈.

• The KIPS Transactions:PartC
• /
• v.14C no.5
• /
• pp.453-462
• /
• 2007

NGN is a packet-based converged network to support session and non-session based services in QoS-enabled broadband transport technologies. Resource and admission control functions(RACF) of NGN have been considering COPS and SNMP as resource management protocols to collect network topology and resource status information of transport network. This paper defines requirements of resource management in NGN transport network, and proposes protocol independent information model to keep consistency of data models of each resource management protocol. Based on this information model described with UML class diagram, we designed and implemented NGN resource management system on Web Services.

• The KIPS Transactions:PartC
• /
• v.16C no.3
• /
• pp.383-392
• /
• 2009

Next generation network (NGN) is a packet-based converged network to support session and non-session services in QoS-enabled broadband transport network. QoS based resource control must be defined to support differentiated services for various network users in NGN. This paper defined parallel control schemes for NGN resource control interfaces to minimize session and resource control delays. We simulated the existing and proposed NGN control schemes to measure and analyze control delays and completion ratios. By arrival rate of 120 in two-phase resource control, we checked out that completion ratios of sequential and parallel schemes achieved 100%, and the control delay of parallel scheme was improved by about 21.5% compared to that of sequential scheme.

• Proceedings of the KIEE Conference
• /
• 1999.07g
• /
• pp.2846-2848
• /
• 1999

본 논문의 목적은 측정된 뇌자도 신호의 잡음제거 및 분석을 목적으로 하는 뇌자도 신호처리 시스템의 개발이다. 뇌자도 신호의 크기는 매우 작고 외부 노이즈 환경에 민감하게 반응하기 때문에 다양한 신호처리 기법을 이용하여 뇌자도 신호의 신뢰성을 높이는 것이 중요하다. 본 논문에서는 40채널 SQUID 시스템을 이용하여 뇌에서 발생하는 자기 신호를 측정하고, 측정된 데이터에 존재하는 노이즈 성분을 선형필터와SQUID 시스템의 레퍼런스 채널을 이용하여 제거하며, 이를 분석하는 뇌자도 신호처리 시스템을 개발하였다. 실제로 청각자극을 이용하여 뇌자도 신호를 측정, 분석 함으로써 개발된 뇌자도 신호처리 시스템의 신뢰성을 확인하였다. 또한 측정한 뇌자도 신호에서 주파수 대역에 따른 뇌자도 신호의 분포를 Map으로 구성하였으며, dipole source의 위치를 표시하였다.

• Proceedings of the KIEE Conference
• /
• 2003.07c
• /
• pp.1502-1504
• /
• 2003

최근 전자기기의 경박단소화 추세는 전자기기의 크기와 가격의 감소를 이끌었으며 이러한 추세는 앞으로 지속될 것이다. 이와 같은 현상으로 전자기기를 구성하는 요소의 절반이상을 차지하는 단위수동소자의 경우 소형화를 넘어 박막화 및 집적화가 절실히 요구되는 실정이다. 따라서 본 연구에서는 현재 GHz 대역의 휴대용 무선통신 송 수신부 등에 사용되고 있는 기판이 $Al_2O_3$ 기판인 점을 고려하여 기판의 공통화를 위해 $Al_2O_3$ 기판 위에 Ta/$Ta_2O_5$/Ta 구조를 갖는 MIM 박막커패시터를 제작하여 그 특성을 고찰하였다. 모든 박막의 증착은 RF-magnetron reactive sputtering법에 의해 이루어졌으며, 유전체 열처리는 $700^{\circ}C$ 진공상태에서 60 sec 동안 수행하였다. XRD 분석결과, as-deposited $Ta_2O_5$ 박막은 열처리 후에 비정질상에서 결정질상으로 변환되었다. Ta/$Ta_2O_5$/Ta/Ti/$Al_2O_3$ 커패시터의 전기적 특성으로는 C-F, C-V, I-V 를 측정하였다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.11
• /
• pp.2111-2118
• /
• 2008

This parer propose a U-dormitory management system based on 13.56MHz RFID system. The proposed U-dormitory management system consists of three parts, the RFID hardware system, the middleware, and the application. RFID hardware system uses 13.56MHz frequency which is suitable for a close range. The middleware is implemented to accept the RFID hardware system values using RS-232c communication method and forward the values to the application. The application is designed to make the DB using the forwarded Haloes, and works based on the DB. The efficacy of the Proposed U-dormitory management system is verified by means of experiments. In the experiments, we set up the system to the dormitory of Daeduk College to show the improvement results of proposed system.

• The KIPS Transactions:PartC
• /
• v.9C no.3
• /
• pp.439-444
• /
• 2002

In this paper, we present both the link budget analysis according to system parameters and the cell coverage according to transmitter power and modulation scheme of digital MMDS among the wireless CATV system methods which is bated on the wireless internet service. Also, in this paper, we present C/I and number of subscriber according to splitting cell. In this paper, the cell coverage of which obtain the results according to both transmitter power from 0dBW to -9dBW and modulation scheme of QPSK, 16QAM and 64QAM based on link budget was analysis for system parameter of digital MMDS was able to provide from maximum 134km to minimum 4.3km. Also, in this paper, the number of subscriber of which obtain the results according to polarization wave, frequency of frequency reuse and C/I in 4. 6 and 8 sectors was able to provide from maximum 5,200DSI to minimum 1,300DSI.

• Journal of the Korean Magnetics Society
• /
• v.4 no.3
• /
• pp.214-218
• /
• 1994

$Y_{3}Fe_{5}O_{12}$ based garnet films(thin or thick) offer a great promise for the application of microwave communication components. We investigated the magnetic and crystallographic preperties of $Y_{3}Fe_{5}O_{12}$ thick films prepared by KrF eximer laser ablation of a stoichiometric garnet target. It was possible to obtain almost epitaxially oriented films on $Al_{2}O_{3}$(1102) plane. Although the crystalline quality depends on substrate temperature and $O_{2}$ partial pressure used($Po_{2}$), 4.1m thick films of $4{\pi}M_{s}=1300$ Gauss and $H_{c}=37.5$ Oe were obtained at the substrate temperature of $700^{\circ}C$ with the $Po_{2}$ of 100 mTorr after annealing the as-deposited films at $700^{\circ}C$ for 2 hours. These films are expected to be used for magnetostatic spin wave filters at narrow bandwidth frequency.