• Journal of the Korean Society of Mechanical Technology
• /
• v.13 no.2
• /
• pp.145-153
• /
• 2011

The irradiation tests of materials in HANARO have been performed usually at temperatures below $300^{\circ}C$ at which the RPV(Reactor Pressure Vessel) materials of the commercial reactors such as the light water reactor and CANDU are operated. As VHTR(Very High Temperature Reactor) and SFR(Sodium-cooled Fast Reactor) projects are being carried as a part of the present Gen-IV program in Korea, the requirements for irradiation of materials at temperatures higher than $500^{\circ}C$ are recently being gradually increased. To overcome the restriction in the use at high temperature of the existing Al thermal media, a new capsule with double thermal media composed of two kinds of materials such as Al-Ti and Al-graphite was designed and fabricated more advanced than the single thermal media capsule. At the irradiation test of the capsule, the temperature of the specimens successfully reached $700^{\circ}C$ and the integrity of Al, Ti and graphite material was maintained.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2004.05a
• /
• pp.157-160
• /
• 2004

본 논문은 미국 차세대 디지털 케이블 방송 표준 규격인 오픈케이블($OpenCable^{TM}$)의 수신제한 모듈인 CableCard의 Physical Layer를 SystemC의 TLM(Transaction Level Modeling)과 RTL(Register-Transfer Level) 모델링 기법으로 설계하였다. 본 논문에서 설계한 CableCard의 Physical Layer는 PCMCIA Interface, Command Inteface 그리고 MPEG-2 TS Interface 로 구성된다. CableCard가 전원이 인가될 때, 카드 초기화를 위하여 동작하는 PCMCIA 인터페이스는 16 비트 PC 카드 SRAM 타입으로 2MByte Memory와 100ns access time으로 동작할 수 있게 설계하였다. PCMCIA 카드 초기화 동작이 완료된 후, CableCard의 기능을 수행하기 위하여 두 개의 논리적 인터페이스가 정의되는데 하나는 MPEG-2 TS 인터페이스이고, 다른 하나는 호스트(셋톱박스)와 모듈 사이의 명령어들을 전달하는 명령어 인터페이스(Command Interface)이다. 명령어 인터페이스(Command Interface)는 셋톱박스의 CPU와 통신하기 위한 1KByte의 Data Channel과 OOB(Out-Of-Band) 통신을 위한 4KByte의 Extended Channel 로 구성되고, 최대 20Mbits/s까지 동작한다. 그리고 MPEG-2 TS는 100Mbits/s까지 동작을 수행할 수 있게 설계하였다. 설계한 코드를 실행한 후, Cadence사의 SimVision을 통해서 타이밍 시뮬레이션을 검증하였다.

• Electronics and Telecommunications Trends
• /
• v.36 no.3
• /
• pp.12-22
• /
• 2021

Since the technical realization of self-aligned planar complementary metal-oxide-semiconductor field-effect transistors in 1960s, semiconductor manufacturing has aggressively pursued scaling that fruitfully resulted in tremendous advancement in device performances and realization of features sizes smaller than 10 nm. Due to many intrinsic material and technical obstacles, continuing the scaling progress of semiconductor devices has become increasingly arduous. As an effort to circumvent the areal limit, stacking devices in a three-dimensional fashion has been suggested. This approach is commonly called monolithic three-dimensional (M3D) integration. In this work, we examined technical issues that need to be addressed and overcome to fully realize energy efficiency, short latency and cost competency. Full-fledged M3D technologies are expected to contribute to various new fields of artificial intelligence, autonomous gadgets and unknowns, which are to be discovered.

• Korean Journal of Health Education and Promotion
• /
• v.26 no.5
• /
• pp.57-70
• /
• 2009

Objectives: This purpose of this study was to make clear the fitness to data of the causality model related to father's child-rearing participation in a double-income household. Methods: Subjects of this survey consisted of the fathers of 2,006 households that use 21 day-care centers and 4 kindergartens whose cooperation was received via the city government departments that have jurisdiction over day-care centers and kindergartens in cities A and B in prefecture I and in city C in prefecture II (city A: 499 households; city B: 1,113 households; city C: 988 households). The surveyed items consisted of the father's age, the father's educational history, the number of children, the age of the youngest child, the father's parental-role awareness, the father's daily working hours, the father's return-home time, and child-rearing participation by the father. Results: The fit indices were found to be CFI = 0.912, GFI = 0.948, and RMSEA = 0.082. Regarding the path coefficients, the path coefficient of the pathway from the age of the youngest child to the father's parent positivity (0.08) and the path coefficient of the pathway from the father's parent positivity to child-rearing participation (0.19) were both at statistically significant levels. Also, the father's return-home time and the working hours, which were considered as disincentives exhibited a direct effect on child-rearing participation without being influenced by the father's parent positivity or parent negativity. The path coefficient of the pathway from return-home time to child-rearing participation was -0.43, and the path coefficient of the pathway from working hours to child-rearing participation was -0.13. The value of the path coefficient expressing the relationship between the return-home time and working hours was 0.80. Conclusion: Authors infered that it'll be the basic material to build a generation mechanism about vanity and father's child-rearing participation appropriately as a result of this research.

• The Korean Journal of Mycology
• /
• v.27 no.4 s.91
• /
• pp.256-273
• /
• 1999

Seventy two isolates of Cordyceps militaris collected from 11 sites in Korea, including two isolates from ATCC, were used to assess genetic variation within Cordyceps militaris. The anamorph stage and cultural characteristics of C. militaris were observed through microscope and investigated on PDA respectively. The anamorphs of C. militaris were identified to be Verticillium. Isolates of C. militaris showed different growth rates, morphology and color. Fifty six isolates of single ascospore and seventy two isolates of mass ascospore from C. militaris were analysed using by Random Amplified Polymorphic DNA (RAPD) for genetic relationship analysis. Fifty six single ascospore isolates fell into two groups by phenogram constructed from distance values using the UPGMA method in NTSYS-pc software: group A from artificial fruit body of C18 except for isolate 51; group B from artificial fruit body of C738. The average genetic distance value within group A is 0.150 and group B is 0.163. The average genetic distance value between the two groups is 0.221. The average genetic distance value within 56 single ascospores is 0.207 and 72 mass ascospores is 0.330. Genetic relationships were not found among 72 mass ascospore isolates obtained from eleven geographically distant populations.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.4B
• /
• pp.275-280
• /
• 2002

Wireless communications have been developed time and time to satisfy more demands of users for internet service, mobile communication service and so on. One of infrastructures leading the next generation wireless communication is HAPS(High Altitude Platform Station). This paper analyzed outage probability when a mobile communication system was constructed by using HAPS. First, an approach to evaluate the carrier to interference power ratio' was introduced and results from the analysis were calculated and simulated. from the results, carrier to interference power ratio (C/I) and fading depth (K) had an effect on outage probability; outage probability decreases when K increases far constant C/I or C/l increases for constant K. In addition, when outage probability for a platform with elevation 30 degrees is expanded into it for 24-platforms, outage probability(C/I=9.8dB) was worse because of many interferers relatively.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.71-71
• /
• 2000

본 연구에서는 차세대 마이크로파 유전체 소자로서의 응용을 목적으로 펄스 레이저 방식에 의하여 증착된 MgTiO3 박막의 전기적 특성을 종합적으로 연구 분석하였다. 이를 바탕으로 MgTiO3 박막의 유전손실 등과 같은 열화를 야기시키는 박막 내부 또는 박막과 기판간의 결함의 특성을 파악하여 열화 메카니즘을 분석하였다. MgTiO3는 마이크로파 영역에서의 우수한 유전특성과 같은 낮은 유전손실을 가지며, 온도 안정성 또한 우수하다. 현재까지 벌크 세라믹 MgTiO3 의 응용 광범위하게 연구되어 왔으나 박막의 제조공정 및 전기적 특성 분석은 미흡한 형편이다. 따라서 벌크 세라믹과는 특성이 상이한 박막의 전기적 특성분석 및 연구가 필요하다. 분석을 위한 소자의 기본 구조로서 Metal-Insulator-Semiconductor(MIS) 구조를 채택하였다. MgTiO3 박막을 증착하기 위한 기판으로는 n형 Si(100)기판과 p형 Si(100)기판을 사용하였고, Si 기판 위에 급속 열처리기 (RTP)를 이용하여 SiO2를 ~100 두께로 성장시킨 것과 성장시키지 않은 것으로 구분하여 제작하였다. MgTiO3 박막은 펄스 레이저 증착 방식(PLD)에 의하여 약 2500 두께로 증착되었으며, 200mTorr 압력의 산소 분위기 하에서 기판의 온도를 40$0^{\circ}C$~55$0^{\circ}C$까지 5$0^{\circ}C$간격으로 변화시키며 제작하였다. 상하부의 전극 금속으로는 Al을 이용하였으며, 열증발 증착기로 증착하였다. 증착된 MgTiO3 박막의 결정구조를 확인하기 위하여 XRD 분석을 수행하였으며, 박막의 전기적 특성을 분석하기 위해 Boonton7200 C-V 측정기와 HP4140P를 이용한 경우에는 C-V 곡선에 이력현상이 나타났으나, MgTiO3/SiO2를 이용한 경우에는 이력현상이 나타나지 않았고, 유전율은 감소하는 것으로 나타났다. I-V 측정 결과, 절연층으로 MgTiO3/SiO2를 이용한 경우에는 MgTiO3만을 절연층으로 사용한 경우에 비해 동일한 전계에서 낮은 누설전류 값을 가짐을 알 수 있었다. 또한 박막의 증착온도가 증가함에 따라서 C-V 곡선의 위치가 양의 방향으로 이동함을 확인하였다. 위의 현상은 기판의 종류에 관계없이 발생하는 것으로 보아 벌크 또는 계면에 존재하는 결함에 의한 것으로 추정된다. 현재 C-V 곡선의 이동 원인과 I-V 곡선의 누설전류 메카니즘을 분석 중에 있으며 그 결과를 학회에서 발표할 예정이다.

• The Journal of the Convergence on Culture Technology
• /
• v.8 no.3
• /
• pp.25-31
• /
• 2022

This study aims to investigate the degree of influence of LMS on online classes conducted after COVID-19 at C University in Gyeongsangnam-do, and to examine the relationship between overall class satisfaction and LMS satisfaction variables. C University started the project to construct 'Next-generation Smart LMS' and operated it from the first semester of 2021. As a result of conducting a survey about overall class satisfaction and LMS satisfaction consisting of five variables with 140 learners who have experienced online classes at C University. The learners showed high satisfaction not only in overall classes but also LMS. As a result of regression analysis of LMS satisfaction and overall class satisfaction, it was found that the functional convenience of LMS and interaction with instructors had a significant effect on overall class satisfaction. This study has limitations in that it was conducted only at one college and a limited number of variables were measured.

• The Korean Journal of Mycology
• /
• v.30 no.2
• /
• pp.86-94
• /
• 2002

Recently a serious outbreak of weed mould caused by a species of Hypocrea occurred in oyster mushroom (Pleurotus ostreatus) substrates in Korea. The disease was characterized by a rapid infestation of the oyster mushroom substrates by Hypocrea sp. and subsequent inhibition of fructification of the mushroom. In spite of it's serious losses to the oyster mushroom industry in Korea, etiology and ecology of the disease have not been studied. Morphological characteristics of the fungus were examined and molecular characteristics of the fungus were compared with those of the green moulds (Trichoderma spp.) isolated from oyster mushroom bed. Stromata formed superficially on suface of the substrates were pulvinate to effuse or irreguler, initially white but becoming yellowish brown, measuring $6.0{\sim}13.0{\times}3.0{\sim}11.0mm$. Perithecia were globose to subglobose, immersed in stroma, $223{\sim}263\;(Ave.239.9){\times}167.3{\sim}231\;(Ave.204.1){\mu}m$ in size. Asci were unitunicate, cylindrical, nonamyloid, $82.7{\sim}124.8\;(Ave.103.3){\times}4.1{\sim}5.1\;(Ave.4.9){\mu}m$ in size, 16 part-spored. Ascospores were bullet-shaped or somewhat oblong, hyaline, bicellular, roughened or warted, $5.4{\sim}7.4\;(Ave.6.5){\times}3.6{\sim}5.5\;(Ave.4.7){\mu}m$ in size. This fungus readily form the stroma on PDA. Mycelia on PDA nearly invisible and without cottony aerial mycelium. Optimum temperature for mycelial growth of this fungus was $25^{\circ}C$ on PDA and its growth rate was 15 mm per day. This species did not grow at below 10 and above $35^{\circ}C$. Phialides in culture enlarged in the middle and aggregated to penicillate type. They were very variable, shorted ampulliform and occasionally curved when matured, but cylinderical when young, measuring $11.9{\sim}24.3\;(Ave.\;14.7){\times}2.9{\sim}3.9\;(Ave.\;3.4){\mu}m$ when matured and $7.2{\sim}14.0\;(Ave.\;10.8){\times}2.8{\sim}4.9\;(Ave.\;3.5){\mu}m$ when young. Phialosopres were ovoid to ellipsoid, smooth, measuring $3.5{\sim}7.2\;(Ave.\;4.5){\times}2.6{\sim}3.3\;(Ave.\;2.9){\mu}m$. Nineteen isolates of Hypocrea sp. were analyzed on the basis of molecular characteristics and classified into phenotypic groups. On the basis of RAPD, URP-PCR, the fungus was confirm to monoclonal, and was classified as a different taxon from reported species of Hypocrea and Trichoderma and supposed to be a new species not previously reported in literature.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.54 no.4
• /
• pp.375-383
• /
• 2009

This study was carried out to develop transgenic rice cultivars with the CAX1 (accession no. U57411) gene. We successfully selected the transgenic rice plants over-expressing the Arabidopsis H+/$Ca^{2+}$ antiporter CAX1 (accession no. U57411) gene in T6 generation. The brown rice of the CAX1 expressing rice contained 13.4~68.0 % more calcium $(Ca^{2+})$ than that of the wild type and 5 lines were selected based on the phenotypes compared to the control cultivar at the GMO field. The CAX1 expressing transgenic rice plants were similar in phenotype to the wild type during the whole growth period. Also these selected 4 lines appeared to be resistant to blast, cold and water solution compared with the wild type. Difference in 1,000 grain weight of brown rice was observed among each line but grain shape did not show any morphological alternations. These results suggest the enhanced Ca-substrate specificity of CAX1 exchanger in donor plant. Therefore, intact CAX1 exchanger can be functionally useful for $Ca^{2+}$ nutrient enrichment of rice with reduced accumulation of undesirable cation.