• Korean Chemical Engineering Research
• /
• v.53 no.5
• /
• pp.620-626
• /
• 2015

$Ho^{3+}$ doped $SrAl_2O_4$ upconversion phosphor powders were synthesized by spray pyrolysis, and the crystallographic properties and luminescence characteristics were examined by varying activator concentrations and heattreatment temperatures. The effect of organic additives on the crystal structure and luminescent properties was also investigated. $SrAl_2O_4:Ho^{3+}$ powders showed intensive green emission due to the $^5F_4/^5S_2{\rightarrow}^5I_8$ transition of $Ho^{3+}$. The optimal $Ho^{3+}$ concentration in order to achieve the highest luminescence was 0.1%. Over this concentration, emission intensities were largely diminished via a concentration quenching due to dipole-dipole interaction between activator ions. According to the dependence of emission intensity on the pumping power of a laser diode, it was clear that the upconversion of $SrAl_2O_4:Ho^{3+}$ occurred via the ground state absorption-excited state absorption processes involving two near-IR photons. Synthesized powders were monoclinic as a major phase, having some hexagonal phase. The increase of heat-treatment temperatures from $1000^{\circ}C$ to $1350^{\circ}C$ led to crystallinity enhancement of monoclinic phase, reducing hexagonal phase. The hexagonal phase, however, did not disappear even at $1350^{\circ}C$. When both citric acid (CA) and ethylene glycol (EG) were added to the spray solution, the resulting powders had pure monoclinic phase without forming hexagonal phase, and led to largely enhancement of crystallinity. Also, N,N-Dimethylformamide (DMF) addition to the spray solution containing both CA and EG made it possible to effectively reduce the surface area of $SrAl_2O_4:Ho^{3+}$ powders. Consequently, the $SrAl_2O_4:Ho^{3+}$ powders prepared by using the spray solution containing CA/EG/DMF mixture as the organic additives showed about 168% improved luminescence compared to the phosphor prepared without organic additives. It was concluded that both the increased crystallinity of high-purity monoclinic phase and the decrease of surface area were attributed to the large enhancement of upconversion luminescence.

• Asian-Australasian Journal of Animal Sciences
• /
• v.9 no.3
• /
• pp.315-317
• /
• 1996

An investigation was carried out to find out the strains of foot-and-mouth disease (FMD) virus in 24 districts of Bangladesh. A total of 505 FMD virus samples were collected from June, 1989 to June, 1991 and tested by complement fixation test (CFT). Of these, 276 (54.7%) were found positive for different strains of FMD virus and the rest 45.3% were either negative or anticomplementary. Strains identified were O, C, Asia-1 and sub-strains $A_5$ and $A_{22}$. Strain O was found to be most prevalent(39.8%) followed by Asia-1 (5.7%), C (5.3%), $A_5$ (3.4%) and $A_{22}$ (0.4%). Prevalence of sub-strain $A_5$ was reported for the first time in Bangladesh. District-wise typing of FMD virus has been done which would be helpful for appropriate vaccination programme in different districts of Bangladesh for control of the malady.

• Journal of Forest and Environmental Science
• /
• v.38 no.2
• /
• pp.90-101
• /
• 2022

The study aims to assess composition, diversity and population indices of natural regeneration of woody species in Jebel El Gerrie forest reserve, Blue Nile State, Sudan. We conducted field work between December 2018 and January 2019. We used random sampling to collect vegetation data in the forest where we made a total of 90 circular sample plots (radius 17.84 m) and distributed them proportionally to the area of each of the four density-based vegetation classes of the forest i.e. high density (C1), medium density (C2), low density (C3) and crop land (C4). In each sample plot we identified all regenerating tree species and counted their regeneration frequencies. We calculated ecological metrics of regeneration frequency, density, abundance, richness, evenness, diversity and importance value index (IVI) and drew abundance rank curve. Results revealed that out of fifteen mature tree species present, natural regeneration of 8 species, which belong to 6 families, was observed. The relatively most frequently naturally regenerating and abundant species were Anogeissus leiocarpa and Combretum hartmannianum. Richness, evenness and diversity of regenerating species were 1.33, 0.82 and 1.7, respectively. One-way ANOVA (α=0.05) of mean regeneration densities disclosed that there were significant differences (F_3,86=16.77, p=0.000) between C2 & C3 (p=0.000) and C2 & C4 (p=0.000). While regeneration of seven tree species were absent, two, two and four species were of good, poor and fair regeneration status, respectively. A comparison of mean density of natural regeneration with that of parent trees reflects a poor regeneration status of the forest. The study provides empirical results on the regeneration status of species and signifies the need for management interventions for species conservation and restoration, maintenance of biodiversity and sustainable production.

• Journal of Plant Biotechnology
• /
• v.49 no.1
• /
• pp.74-81
• /
• 2022

Brassica napus, an oil crop that produces rapeseed oil, is an allotetraploid (AACC, 2n = 38) produced by natural hybridization between B. rapa and B. oleracea. In this study, microspore was cultured using the F₁ developed from a cross between 'EMS26' line with high oleic acid content and 'J8634-B-30' lines. The flower bud size showing the nuclear development at the late uninucleate and binucleate stage with high embryogenesis rate was 2.6 ~ 3.5 mm. Microspores were cultured using only this size and after then most microspore embryo developed into secondary embryos and then regeneration plants obtained from the developed multilobe. The analysis of the ploidy of the plants revealed that 66.7% and 27.8% of the total lines were tetraploids and octoploids, respectively. The sizes of stomatal cells in tetraploids, octoploids, and diploids were 25.5, 35.6, and 19.9 ㎛, respectively, indicating that ploidy level was positively correlated with cell size. Furthermore, 62 tetraploid doubled haploid (DH) lines were selected. The average oleic acid (C18:1) and linolenic acid (C18:3) concentrations of DH were 72.3% and 6.2%, respectively. Oleic acid and linolenic acid concentrations exceeded the two parental values in 5 and 14 DH lines, respectively, suggesting that these two fatty acids had transgressive segregation. Therefore, the DH population can be utilized for the biosynthesis of unsaturated fatty acids in rapeseed and related genes. It can also be used as a breeding material for varieties with high oleic acid concentrations.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.10
• /
• pp.1485-1490
• /
• 2014

$SF_6$ gas has been used for power transformers or gas insulated switchgears, because it has the superior insulation property and the stable structure chemically. It has been, however, one of global warming gases and required to reduce the its amount. Some papers have reported that its amount could be reduced by mixing with other gases, such as $N_2$, $CF_4$, $CO_2$ and $C_4F_8$ and their mixture gases would cause the synergy effect. In this paper, we investigated the characteristics of DC plasmas on $SF_6$ mixture gases with $N_2$ at atmospheric pressure. $N_2$ gas is one of cheap gases and has been reported to show the synergy effect with mixing $SF_6$ gas, even though $N_2$ plasmas have electron-positive characteristics. 38 kinds of $SF_6/N_2$ plasma particles, which consisted of an electron, two positive ions, five negative ions, 30 excitation and vibration particles, were considered in a one dimensional fluid simulation model with capacitively coupled plasma chamber. The results showed that the joule heating of $SF_6/N_2$ plasmas was mainly caused by positive ions, on the other hand electrons acted on holding the $SF_6/N_2$ plasmas stably. The joule heating was strongly generated near the electrodes, which caused the increase of neutral gas temperature within the chamber. The more $N_2$ mixed-ratio increased, the less joule heating was. And the power consumptions by electron and positive ions increased with the increase of $N_2$ mixed-ratio.

• Journal of the Korean institute of surface engineering
• /
• v.48 no.5
• /
• pp.211-217
• /
• 2015

To fabricate white LED having a high color rendering index value, red color phosphor mixed with the green color phosphor together in the blue chip, namely the blue chips with RG phosphors packaging is most favorable for high power white LEDs. In our previous papers, we reported on successful syntheses of $Sr_{2-}$ $Si_5N_8:Eu^{2+}$ and $CaAlSiN_3$ phosphors for red phosphor. In this work, for high power green phosphor, greenemitting ternary nitride $Ba_3Si_6O_{12}N_2:Eu^{2+}$ phosphor was synthesized in a high frequency induction furnace under $N_2$ gas atmosphere at temperatures up to $1400^{\circ}C$ using $EuF_3$ as a raw material for $Eu^{2+}$ dopant. The effects of molar ratio of component and experimental conditions on luminescence property of prepared phosphors have been investigated. The structure and luminescence properties of prepared $Ba_3Si_6O_{12}N_2:Eu^{2+}$ phosphors were investigated by XRD and photoluminescence spectroscopy. The excitation spectra of $Ba_3Si_6O_{12}N_2:Eu^{2+}$ phosphors indicated broad excitation wavelength range of 250 - 500 nm, namely from UV to blue region with distinct enhanced emission spectrum peaking at ${\approx}530nm$.

• Journal of the Korean Chemical Society
• /
• v.30 no.5
• /
• pp.441-448
• /
• 1986

Dioxobis(sub.-salicylaldiminato) molybdenum (VI) complexes, $MoO_2\;(X-sal-N-R)_2,\;(X=H,\;5-CH_3,\;R=C_6H_5,\;p-F-C_6H_4,\;m-Cl-C_6H_4,p-I-C_6H_4\;and\;p-C_2H_5-C_6H_4)$, have been prepared by reactions of dioxobis(sub.-salicylaldehydato) molybdenum (VI), $MoO_2(X-sal)_2$ with primary amines, in which $MoO_2(X-sal)_2$ complexes were obtained by acidification of a mixture solution of ammonium paramolybdate in water and appropriate salicylaldehyde in methanol. All these complexes show two strong Mo=O stretching imodes in the 900-940$cm^{-1}$ and p.m.r. spectra exhibited only one signal for the azomethine group. These results confirmed that the complexes are six-coordinated octahedron with a $cis-MoO_2$ group and the geometrical configurations of the complexes possess a C2 axis of symmetry. From the mass analyses of the complexes, it found that the composition ratios of $MoO_2$ : ligand are 1 : 2. The charge transfer transition corresponding to N-Mo, and O-Mo occured at 29,000$cm^{-1}$ and 32,000$cm^{-1}$ respectively. Where, the complexes were found to be non-ionic materials by conductivity measurements in dimethylformamide.

• Food Engineering Progress
• /
• v.14 no.2
• /
• pp.159-165
• /
• 2010

Red ginseng tail roots (9.8 g water/100 g sample) were puffed at 7, 8, 9, and 10 $kg_{f}/cm^{2}$ using a rotational puffing gun. Puffed red ginseng was extracted with 70% ethanol, and the concentrated extract was successively partitioned with diethyl ether, n-butanol and $H_{2}O$. Two unknown ginsenosides from puffed red ginseng were found at 63 and 65 min of retention time in HPLC chromatogram suggesting that chemical structure of some ginsenosides might be altered during the puffing process. Identification of two unknown compounds was carried out using TLC, HPLC and NMR. Two major compounds were isolated from TLC. According to TLC result, compound I was expected to be the mixture of ginsenosides Rk1 and Rg5, and compound II was expected to be a 20(S)-ginsenoside $Rg_{3}$. Three compounds were isolated from n-butanol fraction through repeated silica gel and octadecyl silica gel column chromatographies. From the result of $^{1}H$- and $^{13}C$-NMR data, the chemical structures of unknown compounds were determined as ginsenoside $Rg_{5}$ and 20(S)-ginsenoside $Rg_{3}$. Unfortunately, ginsenoside $Rk_{1}$ could not be separated from ginsenoside-$Rg_{5}$ in the compound I. It was carefully reexamined using HPLC and confirmed that the last unknown compound was ginsenoside-$Rk_{1}$.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.23 no.8
• /
• pp.655-659
• /
• 2010

Nanoporous titanium dioxide ($TiO_2$) is very attractive material for various applications due to the high surface to volume ratio. In this study, we have fabricated nanoporous $TiO_2$ thin films on Si by anodic oxidation. 500-nm-thick titanium (Ti) films were deposited on Si by using electron beam evaporation. Nanoporous structures in the Ti films were obtained by anodic oxidization using ethylene glycol electrolytes containing 0.3 wt% $NH_4F$ and 2 vol% $H_2O$ under an applied bias of 5 V. The diameter of nanopores in the Ti films linearly increased with anodization time and the whole Ti layer could become nanoporous after anodizing for 3 hours, resulting in vertically aligned nanotubes with the length of 200~300 nm and the diameter of 50~80 nm. Upon annealing at $600^{\circ}C$ in air, the anodized Ti films were fully crystallized to $TiO_2$ of rutile and anatase phases. We believe that our method to fabricate nanoporous $TiO_2$ films on Si is promising for applications to thin-film gas sensors and thin-film photovoltaics.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.36 no.8
• /
• pp.860-874
• /
• 2012

This study provides size information on current imported medical compression stockings in Korea. A total 20 brands from 6 countries imported and sold in the Korean on-off line markets were selected for this study and the sizing system of medical compression stockings was researched. The results of this study were as follows: there were size differences among different USA brands according to product type or compression class of medical compression stockings. To establish the sizing system for medical stockings of the German brands, the basic body measurements standard was set as cA, cY, cB, cB, cC, cD, cE, cF, cG, cH, cT, lD, lG, and lT. Italian brands developed the sizing system for medical compression stockings by compression class. In the Swiss brands, size types were sub-divided as 'Normal', 'Plus', 'Short', and 'Long'. The sizing 1 were confined within very narrow limits. There were differences of the basic body measurements between Taiwan brands. The results of the comparison of the size range of the imported brands with Size Korea (KATS, 2010) by two-way size distribution shows that the sizing systems of the imported brands were unsuitable for Koreans. To enhance the suitability of the sizing system for medical compression stockings, a new sizing system for Korean adult males and females needs to be established.