• 제목/요약/키워드: C++

검색결과 163,876건 처리시간 0.101초

Alditol Acetates의 분자구조 (The Structures of Alditol Acetates)

  • 박영자;박명희;신정미
    • 대한화학회지
    • /
    • 제34권6호
    • /
    • pp.517-526
    • /
    • 1990
  • D-glucitol hexaacetate 와 xylitol pentaacetate의 결정구조를 단결정 X-선 회절법으로 연구하였다. D-glucitol hexaacetate 는 공간군 P2$_1$, 단위세포 상수는 a = 10.275 (2), b = 8.363 (1), c = 12.560 (5) $\AA$, $\beta$= 95.97 $(2)^{\circ}$; Z = 2이고, xylitol pentaacetate는 공간군이 P2$_1$/C이고, a = 18.126 (1), b = 11.422 (2), c = 8.649 (1) $\AA$, $\beta$ = 95.03 $(1)^{\circ}$이며 Z = 4이다. 회절세기는 diffractomerer로 얻었고, 분자구조는 직접법으로 밝혔으며, 최소자승법으로 정밀화하였다. 두 분자에 결쳐 결합의 평균길이는 C($sp^3)-C(sp^3$)가 1.514 (10), C($sp^3)-O: 1.444 (6),\; C(sp^2)-O: 1.347 (9),\; C(sp^2)=O: 1.197 (6),\; C(sp^2)-C(sp^3): 1.479(9){\AA}$이고, 평균 결합각도는 C($sp^3)-C(sp^3)-C(sp^3): 114.6 (17),\; O-C(sp^3)-C(sp^3): 109.4 (23),\; C(sp^2)-O-C(sp^3): 117.4 (6),\; O=C(sp^2)-O: 122.6 (6),\; C(sp^3)-C(sp^2)-O: 111.8 (7), C(sp^3)-C(sp^2)=O: 125.5 (4)${\circ}$이다. 두 분자내의 탄소 사슬들은 extended zigzag chain으로 되어 있어 D-glucitol과 xylitol 분자들의 conformation과는 다르다. Acetate group들의 각 원자들은 모두 한 평편상에 놓여있다.

  • PDF

고온, 고전압용 SiC 마이크로 히터 설계, 제작 및 특성 (Design fabrication and characteristics of 3C-SiC micro heaters for high temperature, high powers)

  • 정재민;정귀상
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2009년도 추계학술대회 논문집
    • /
    • pp.113-113
    • /
    • 2009
  • This paper describes the characteristics of a poly 3C-SiC micro heater which was fabricated on $AlN(0.1{\mu}m)/3C-SiC(1.0{\mu}m)$ suspended membranes by surface micro- machining technology. The 3C-SiC and AlN thin films which have wide energy bandgap and very low lattice mismatch were used sensors for high temperature and voltage environments. The 3C-SiC thin film was used as micro heaters and temperature sensor materials simultaneously. The implemented 3C-SiC RTD (resistance of temperature detector) and the power consumption of micro heaters were measured and calculated. The TCR (thermal coefficient of the resistance) of 3C-SiC RTD is about -5200 $ppm/^{\circ}C$ within a temperature range from $25^{\circ}C$ to $50^{\circ}C$ and -1040 $ppm/^{\circ}C$ at $500^{\circ}C$. The micro heater generates the heat about $500^{\circ}C$ at 10.3 mW. Moreover, durability of 3C-SiC micro heaters in high voltages is better than pt micro heaters. A thermal distribution measured and simulated by IR thermovision and COMSOL is uniform on the membrane surface.

  • PDF

Fabrication of SiC-TiC Composites via Mechanochemical Synthesis

  • Park, Heon-Jin;Lee, Ki-Min;Kim, Hyung-Jong;Lee, June-Gunn
    • 한국세라믹학회지
    • /
    • 제38권4호
    • /
    • pp.314-318
    • /
    • 2001
  • SiC-TiC composites have been fabricated by using a mechanochemical processing of a mixture of Si, Ti, and C at room temperature and subsequent hot pressing. TiC powders have been obtained by the mechanochemical processing of a mixture of Ti and C whereas SiC powders has not been obtained from a mixture of Si and C. By using the exothermic reaction between Ti and C, SiC-TiC powder could be obtained from the mixture of Si, Ti, and C using the mechanochemical processing for more than 12h. The X-ray diffraction analysis has shown that the powder subjected to the mechanochemical processing consisted of the particles having crystallite size below 10nm. Fully densified SiC-TiC composites have been obtained by hot-pressing of the powder at 1850$\^{C}$ for 3h and it has shown comparable mechanical properties to those of the SiC-TiC composites prepared from the commercially available SiC and TiC powders. Flexural strength of 560 MPa and fracture toughness of 4.8 MP$.$am$\_$1/2/ have been shown for the SiC-TiC composites with composition corresponding to 0.75:0.25:1 mole ratio of Si:Ti:C.

  • PDF

3C-SiC 마이크로 히터의 제작과 그 특성 (Fabrication of 3C-SiC micro heaters and its characteristics)

  • 정귀상;정재민
    • 센서학회지
    • /
    • 제18권4호
    • /
    • pp.311-315
    • /
    • 2009
  • This paper describes the characteristics of a poly 3C-SiC micro heater which was fabricated on AlN(0.1 $\mu$m)/3C-SiC(1.0 $\mu$m) suspended membranes by surface micro-machining technology. The 3C-SiC and AlN thin films which have wide energy band gap and very low lattice mismatch were used sensors for high temperature and voltage environments. The 3C-SiC thin film was used as micro heaters and temperature sensor materials simultaneously. The implemented 3CSiC RTD(resistance of temperature detector) and the power consumption of micro heaters were measured and calculated. The TCR(thermal coefficient of the resistance) of 3C-SiC RTD is about -5200 ppm/$^{\circ}C$ within a temperature range from 25 $^{\circ}C$ to 50 $^{\circ}C$ and -1040 ppm/$^{\circ}C$ at 500 $^{\circ}C$. The micro heater generates the heat about 500 $^{\circ}C$ at 10.3 mW. Moreover, durability of 3C-SiC micro heaters in high voltages is better than Pt micro heaters. A thermal distribution measured and simulated by IR thermovision and COMSOL is uniform on the membrane surface.

Taxonomic Importance of Leaf Domatia of the Five Species of the Genus Cornus in Korea

  • Kim, Bong-Gyu;Ngondya, Issakwisa Bernard
    • 농업생명과학연구
    • /
    • 제44권6호
    • /
    • pp.79-82
    • /
    • 2010
  • Three types of leaf domatia; Pocket (P), Tufts (T) and Tufts-Pocket (TP) were observed in the five species of Cornus namely; Cornus kousa, C. controversa, C. officinalis, C. walteri and C. alba. In C. walteri no tufts were observed, the domatia was just a well developed pocket one. In C. officinalis and C. kousa, tufts domatia of brownish color were observed but C. officinalis developed denser tufts than those observed in C. kousa. Unlike in C. kousa where the domatia covered about only 1/2 of the axil, in the C. officinalis tufts covered almost 3/4 of the axil. In both species the tufts domatia were located in the inner side of the leaf axil. In C. controversa and C. alba whitish colored tufts were observed covering Pockets and hence the Tuft Pocket domatia. In C. controversa the tufts were more than in C. alba but in both species the tufts were short and were located in the inner sides of the axil. Thus, based on these physiological features it was concluded that C. officinalis and C. kousa are sister species likewise C. controversa and C. alba while C. walteri belong to another lineage. The advancement of domatia (absence of tufts) in C. walteri suggests that they are the most advanced while C. officinalis and C. kousa the most primitive due to their possession of highly developed tufts and C. controversa and C. alba the intermediates.

Microwave 열처리에 의한 원유의 화학적 및 미생물학적 성상의 변화에 관한 연구 (Studies on the Changes in Chemical Composition and Microbiological Aspects of Raw Milk by Microwave Heating)

  • 신병홍;김종우
    • 농업과학연구
    • /
    • 제25권2호
    • /
    • pp.181-198
    • /
    • 1998
  • 원유를 $50^{\circ}C$, $55^{\circ}C$, $60^{\circ}C$, $65^{\circ}C$$70^{\circ}C$에서 30분간 microwave 열처리(MW)하고 $65^{\circ}C$에서 30분간 water bath(WB)에서 열처리 하였을때의 화학적 및 미생물학적인 성상의 변화와 $5^{\circ}C$의 냉장상태에서 10일간 보존하면서 화학적 및 미생물학적인 변화상태를 시험한 결과는 다음과 같다. 1. 원료유를 MW와 WB 열처리를 실시하였을 때에는 유지방, 유단백질, 유당, 및 총고형분 함량의 변화는 나타나지 않았다. 2. 원료유의 pH와 산도는 각각 6.75 및 0.16%이었으며, MW와 WB가열시의 pH와 산도는 6.75~6.50 및 0.16%~0.19%이었으며, phosphatase 시험결과는 $61^{\circ}C$에서 20분, $62^{\circ}C$에서 15분, $63^{\circ}C$에서 10분, $64^{\circ}C$에서 5분, $65^{\circ}C$에서 5분 이후의 MW가열과 $65^{\circ}C$ 30분간 WB가열에서 음성으로 나타났다. 3. 가열처리온도가 높아짐에 따라 whey protein의 항량은 감소하였으며, proteolytic activity는 MW가열에서 94%이었으며, $65^{\circ}C$, 30분간 WB가열에서는 44%로 낮게 나타났다. 4. 원유의 총균수는 $2.8{\times}10^5CFU/m{\ell}$로서, MW $65^{\circ}C$ 가열에서 $2.8{\times}10^3CFU/m{\ell}$, $70^{\circ}C$에서 $2.4{\times}10^3CFU/m{\ell}$, WB $65^{\circ}C$ 가열에서 $3.0{\times}10^3CFU/m{\ell}$로 나타났으며, $65^{\circ}C$$70^{\circ}C$ 30분간 MW가열과 $65^{\circ}C$, WB가열시에 저장 10일 동안 미생물수가 크게 증가하지 않아 보존성이 우수한것으로 나타났다. 또한 $61^{\circ}C$, $62^{\circ}C$, $63^{\circ}C$, $64^{\circ}C$, $65^{\circ}C$에서 5분 내지 30분 동안 MW가열시에 총균수가 5분 이후에 크게 감소하였다. 5. 원료유의 대장균수는 $2.6{\times}10^3CFU/m{\ell}$이었으며, $55^{\circ}C$, $60^{\circ}C$, $65^{\circ}C$$70^{\circ}C$에서 MW가열과 $65^{\circ}C$, WB가열시에 대장균이 검출되지 않았다. 또한 $61^{\circ}C$, $62^{\circ}C$, $63^{\circ}C$, $64^{\circ}C$$65^{\circ}C$에서 5~30분 동안 MW가열시에 5분 이후부터 검출되지 않았다. 6. 원료유의 내열성균수는 $5.2{\times}10^4CFU/m{\ell}$이었으나, MW $65^{\circ}C$ 가열에서 $2.0{\times}10^3CFU/m{\ell}$, $70^{\circ}C$에서 $1.9{\times}10^3CFU/m{\ell}$, WB $65^{\circ}C$ 가열에서는 $2.2{\times}10^3CFU/m{\ell}$로 나타났고, $65^{\circ}C$$70^{\circ}C$ 30분간 MW가열시와 $65^{\circ}C$ WB가열시에 저장 10일 동안 미생물수가 크게 증가하지 않아 보존성이 우수한 것으로 나타났다. 또한 $61^{\circ}C$, $62^{\circ}C$, $63^{\circ}C$, $64^{\circ}C$, $65^{\circ}C$에서 5분 간격으로 30분 동안 MW가열시 총 균수가 5분 이후에 크게 감소하였다. 7. 원료유의 내냉성 미생물수는 $2.8{\times}10^5CFU/m{\ell}$이었으나, MW $65^{\circ}C$ 가열에서 $2.0{\times}10^1CFU/m{\ell}$, $70^{\circ}C$에서 $2.0{\times}10^1CFU/m{\ell}$, WB $65^{\circ}C$ 가열에서는 $3.0{\times}10^1CFU/m{\ell}$로 나타났고, $65^{\circ}C$$70^{\circ}C$ 30분간 MW가열시와 $65^{\circ}C$ WB가열시에 저장 10일 동안 미생물수가 크게 증가하지 않아 보존성이 우수한 것으로 나타났다. 또한 $61^{\circ}C$, $62^{\circ}C$, $63^{\circ}C$, $64^{\circ}C$, $65^{\circ}C$에서 5분 간격으로 30분 동안 MW가열시 총균수가 5분 이후에 크게 감소하였다.

  • PDF

식물유(植物油)의 Triglyceride조성(組成)에 관한 연구(硏究) -제3보(第3報) : 올리브기름의 Triglyceride조성(組成)- (Studies on the Triglyceride Composition of some Vegetable Oils -III. Triglyceride Composition of Olive Oil-)

  • 최수안;박영호
    • 한국식품과학회지
    • /
    • 제15권1호
    • /
    • pp.66-69
    • /
    • 1983
  • 올리브기름의 트리-글리세리드조성(組成)을 구명(究明)하기 위하여, 시료유(試料油)를 TLC에 의하여, 트리-글리세리드를 분리(分離)하고, 분리(分離)한 트리-글리세리드 HPLC에 의하여 PN별(別)로 4군(群)으로 분획(分劃)하였으며, 각 획분(劃分)을 분취(分取)하여 GLC에 의하여 acyl탄소수별(炭素數別)로 분획(分劃)하였다. 또 PN별(別) 획분(劃分)은 GLC로 지방산조성(脂肪酸組成)을 분석(分析)하였다. 올리브기름에 있어서 주(主)로 PN48에 acyl탄소(炭素) C-52 및 C-54가 높은 비율(比率)로 함유되어 있으며, 지방산(脂肪酸)은 C18 : 1 및 C18 : 2가 주요성분(主要成分)으로 구성(構成)되여 있었다. 시료유(試料油)의 주요(主要) 트리-글리세리드를 들면 다음과 같다. $(3{\times}C18:1;50.46%),\;(1{\times}C16:0,\;2{\times}C18:1;23.51%)$ $(2{\times}C18:1,\;1{\times}C18:2;5.48%),\;(1{\times}C18:0,\;2{\times}C18:1;4.55%)$ $(1{\times}C16:0,\;1{\times}C18:1,\;1{\times}C18:2;2.94%)\;(2{\times}C16:0,\;1{\times}C18:1;2.35%)$ $(1{\times}C16:1,\;2{\times}C18:1;2.21%),\;(1{\times}C18:1,\;2{\times}C18:2;1.06%)$, 및 $(1{\times}C14:0,\;2{\times}C18:1;1.03%)$이였다.

  • PDF

호도기름의 Triglyceride 조성(組成)에 관한 연구(硏究) (Triglyceride Composition of Walnut Oil)

  • 천석조;박영호
    • 한국식품영양과학회지
    • /
    • 제13권3호
    • /
    • pp.263-267
    • /
    • 1984
  • 호도(胡桃)기름의 triglyceride 조성(組成)을 밝히기 위하여 TLC로서, 호도(胡桃)기름의 triglyceride를 분리하고, 이것을 HPLC에 의하여 PN별(別)로 triglyceride를 분획(分劃)하였다. PN 별(別)로 분획(分劃)한 각(各) 획분(劃分)을 다시 GLC에 의하여 acyl 탄소수별(炭素數別)로 분획(分劃)하였으며, 또한 PN별(別) 각획분(各劃分)의 지방산조성(脂肪酸組成)을 GLC로 분석(分析)하였다. 이들 세가지 chromatography의 분석결과(分析結果)로 부터 호도(胡桃)기름의 triglyceride 조성(組成)을 산정(算定)하였다. 산정(算定)한 호도(胡桃)기름의 triglyceride는 10종류였으며, 이들 중 1% 이상을 차지하는 triglyceride를 들면 다음과 같다. $(C_{18:2},\;C_{18:2},\;C_{18:2};\;53.3%)$, $(C_{18:1},\;C_{18:2},\;C_{18:2};\;10.1%)$, $(C_{18:1},\;C_{18:1},\;C_{18:2};\;5.4%)$, $(C_{18:1},\;C_{18:2},\;C_{18:3};\;4.3%)$, $(C_{18:0},\;C_{18:2},\;C_{18:2};\;3.9%)$, $(C_{18:0},\;C_{18:1},\;C_{18:2};\;2.0%)$, $(C_{18:0},\;C_{18:2},\;C_{18:2};\;1.8%)$.

  • PDF

유류된 잠재지문의 지방산조성에 관한 연구 (Study on fatty acids composition by latent fingerprint deposition)

  • 최미정;하재호;박성우
    • 분석과학
    • /
    • 제21권3호
    • /
    • pp.212-221
    • /
    • 2008
  • 사건현장에 잔류하는 잠재지문의 효과적인 탐색 및 감식을 위한 자료를 얻고자 비다공성 증거물에 잔류된 잠재지문의 지방산 조성분석을 실시하고 7개월간의 지문유류에 따른 조성 변화에 대하여 알아보고자 하였다. 지문시료는 한국인 29-50 세 남성 8인과 여성(36 세) 1명으로부터 제공받았다. 모든 지문에서는 lauric acid (C12:0), myristic acid (C14:0), palmitic acid (C16:0), stearic acid (C18:0), elaidic acid (C18:1n9t), oleic acid (C18:1n9c), linoleic acid (C18:2n6c), arachidic acid (C20:0), linolenic acid (C18:3n3), erucic acid (C22:1n9)와 docosadienoic acid (C22:2)의 11종의 지방산이 검출됨을 확인하였고, palmitic acid (35.45-48.37%), oleic acid (14.84-28.49%), stearic acid (9.71-24.96%)와 linoleic acid (7.68-18.85%)가 확인된 지방산조성의 75%이상을 차지하여 주요 구성성분임을 알 수 있었다. 또한 7개월간 온도 $20-25^{\circ}C$, 습도 40-50%의암실환경에서의장기간유류에따라총지방산의함량이 12-25% 감소하였으며, 이는 elaidic acid (C18:1n9t), arachidic acid (C20:0), linolenic acid (C18:3n3), erucic acid (C22:1n9), docosadienoic acid (C22:2)의 장쇄지방산들의 소실과 단쇄지방산인 myristic acid (C14:0), myristoleic acid (C14:1), pentadecanoic acid (C15:0)의 생성에 따른 결과임을 확인하였다.

반응결합 소결에 의한 SiC-TiC계 복합재료 제조 (Manufacture of SiC-TiC System Composite by the Reaction-Bonded Sintering)

  • 한인섭;김홍수;우상국;양준환;정윤중
    • 한국세라믹학회지
    • /
    • 제31권8호
    • /
    • pp.849-860
    • /
    • 1994
  • The microstructural evolution and crystalline phases of this infiltration of Ti+Al liquids in TiC, SiC, TiC+C, and SiC+C preforms have been investigated. As the Ti and Al mixing ratio in Ti+Al infiltrated liquid changes, the newly formed reaction products, which were reacted from the Ti+Al liquid with preforms, consisted of three major phases as Ti3AlC, Al2Ti4C2 or Al4C3. The TiC grain shape was changed to spheroid, when Ti3AlC was formed. In case of Al2Ti4C2 formation, the platelet grain was formed from the original TiC grain. When Al4C3 was formed, nodular or intergranular fine-grained Al4C3 was formed around the TiC grain, while the original TiC grain shape was not changed.

  • PDF