• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.1314-1317
• /
• 2007

This study is on the fire resistance evaluation method, expecially on the toxicity of smoke gases generated from the fire, of materials for railway car and structures. Until now, Although international standard related to the quantifying evaluation method of smoke gas is provided but the specific procedure is not contained. On this reason, Test results of toxicity show deviation with the different technique being applied. For now, In advanced railway country, various instrument, like ion chromatography and etc., is used but FT-IR is recommended due to its lots of advantages. while FT-IR has a lot of strong points but still has some problems like water vapor interferences. In this paper, To improve credibility and repeatability of FT-IR it contains some technical solutions in quantifying the 8 toxic components.

• Proceedings of the SAREK Conference
• /
• 2009.06a
• /
• pp.603-607
• /
• 2009

About a Structure is performance external insulation is fundamantal performance for enrgy-saving. these day, most of residential structures have constructed by internal insulation method structure. The method structure internal insulation have construction and economical efficiency, but on the other hand, be generated heat loss by heat bridge especially, be generated loss heat-energy logical consequence in structure ondol. The external insulation structure method has a mert able to minimum to loss heat about heat-bridge. But the external insulation technique is unsatisfactory statues within the know-how and method of construction and materials compared with developed countries. The recently, the requirement of market related to the external insulation technique is resulted by the energy efficiency system, but it can lead to the lack of alternative technique In study on the korea type passive house building design for insulation block method of wall system has to experimental characteristic heat-energy of practice building. In result field-experimental, the heat-bridge appeared to characteristic spent heat-energy of blow 2L class and have a suffience performance it.

• Plant Disease and Agriculture
• /
• v.5 no.2
• /
• pp.90-94
• /
• 1999

Effect of inoculum concentration inoculation method and plant age on development of clubroot disease of Chinese cabbage seedling were examined in growth chambers. Root galls were developed at the concentration of 105 resting spore or above per ml of incoulum and as the inoculum concentration became higher rate of development of root galls was faster. In the plants with root gall development fresh weight of above ground parts was reduced to 30-44% of that of healthy plants but root weight increased by 4-10 times. Growth of diseased plants was greatly reduced as compared to healthy plants. Planting in the diseased soil as a inoculation method was most effective for disease development showing uniform infections but time of initial root gall development was delayed by root soaking inoculation. Some plants inoculated by soil drenching method did not develop root galls. However root gall enlargement after its initial formation did not differ greatly among inoculation methods. Nine-day-old seedlings showed poor development of root gall but 16-days-old seedlings was found to be most adequate for inoculation for gall development.

• Journal of the Korean Society of Industry Convergence
• /
• v.23 no.6_2
• /
• pp.949-956
• /
• 2020

It's important to measure fuel consumption of vehicles. It's possible to monitor green house gas from vehicles for various traffic conditions with the measured data. It's effective to eco-drive for drivers with fuel consumption data also. There's a display of fuel consumption in the modern vehicles, but it's not useful to get the data from the display. An estimating method for fuel consumption of a vehicle is suggested in the study. It's a simple but an effective method using GPS data. The GPS data(speed, acceleration, road slope) and vehicle data(weight, frontal area, model year, certified fuel economy) is necessary to estimate the fuel consumption for the method. It calculates driving resistance force to estimate engine power. Then it estimates the necessary fuel consumption to maintain the engine power with fuel-power conversion factor. The conversion factor is corrected with certified fuel economy, model year and rated power. The precision of the methods is checked with road test data. The test driving data was measured with GPS and OBD. The error of the estimated fuel consumption for the measured one is about 1.8%. But the error is large for the 1000 and 100 data number from the total data number of about 10,000. The error is from the larger change range of the GPS data than the one of the measured fuel consumption data. But the proposed estimating method is useful to percept the fuel consumption change for better fuel economy with simple gadget like smart phone or other GPS instruments.

• Journal of Korean Society of Water and Wastewater
• /
• v.13 no.3
• /
• pp.101-106
• /
• 1999

This research aims to compare immobilized catalysts prepared by various methods and determine suitable $TiO_2$ catalyst for water purification. Sol-gel method by Anderson and powder coation method by Tanaka ate famous in the methods to immobilize catalyst. Therefore, the $TiO_2$ catalyst for this research was prepared by sol-gel method and powder coating method. Its structure was tested by X-ray diffractometer (XRD), Scanning electron microseope (SEM). Durability of a catalyst-support couple in an solution was investigated. too. Experimental results were summarized as following; i) Optimum ratio of Ti : $H_2O$ : $H^+$ to obtain stable sol was 1 : 10 : 0.1 and the XRD patterns of $TiO_2$ film immobilized by sol-gel method which were fired at $700^{\circ}C$ showed that the catalyst had an anatase structure. ii) The particle size of $TiO_2$ prepared by sol-gel method was less than $5{\mu}$, but it was observed that coated side was not unifiom. iii) Sol-gel method was very effective to obtain $TiO_2$ catalyst of thin film, but spreadability and durability of a catalyst-support couple in a solution were than $TiO_2$ film immobilized by powder coating method. iv) The particle size of $TiO_2$ immobilized by powder coating method was a little larger than it prepared by sol-gel method, but spreadability and uniformity of $TiO_2$ film and durability of a catalyst-support couple in a solution were better than it immobilized by sol-gel method.

• The Journal of Korean Medicine
• /
• v.16 no.1 s.29
• /
• pp.96-117
• /
• 1995

1. The Pung(風) is the necessary power for growth and maintenance of life. 2. The characteristics of the Pung(風) is the Yang evil, the features for opening and excretion, mobility and rapid change. That is the major cause of all diseases, and its mobility is the main character. 3. Jung Pung(中風) is the same concept of apoplexy in Western medicine. 4. Jung Pung(中風) is classified on the basis of pathology, anatomy, and histology in Western Medicine, but In Oriental Medicine that is classified on the basis of symptom and severity of disease. 5. In Western Medicine, Jung Pung(中風) was regarded as the local cause of disease, but in Oriental Medicine regarded as the physiological changes caused by the weakness of the whole body. 6. In the emergency care, the method of GaeKeum is compared to Levin tubing, the method of to the use of urokinase for the promotion of cerebrovascular circulatio, and the method of To(吐法) to suction for the elimination of Dam(痰), the method of Hun(熏法) to the use of solution for the improvement of circulation. 7. With the comparison of the cause and diagnosis, the hemorrhagic disease and infarction were regarded as the major agents in Western Medicine and the symptom appeared in the patient was the standard of diagnosis and therapy in Oriental Medicine. 8. In the Western therapy of cerebral hemorrhage, the method of coagulation and hemostasis was used for the elimination of hematoma and cerebral edema, but in Oriental Medicine, the method of YanghaelGiHael(凉血止血) was used for descending the PungHwa(風火) and hemostasis. 9. In the period of recovering injury, the physical therapy was underlined for the recovering of partial function in Western Medicine, the method of accupuncture and drug therapy was adapted for the normal function of the whole body.

• International Journal of CAD/CAM
• /
• v.6 no.1
• /
• pp.139-148
• /
• 2006

Catmull-Clark subdivision scheme provides a powerful method for building smooth and complex surfaces. But the number of faces in the uniformly refined meshes increases exponentially with respect to subdivision depth. Adaptive tessellation reduces the number of faces needed to yield a smooth approximation to the limit surface and, consequently, makes the rendering process more efficient. In this paper, we present a new adaptive tessellation method for general Catmull-Clark subdivision surfaces. Different from previous control mesh refinement based approaches, which generate approximate meshes that usually do not interpolate the limit surface, the new method is based on direct evaluation of the limit surface to generate an inscribed polyhedron of the limit surface. With explicit evaluation of general Catmull-Clark subdivision surfaces becoming available, the new adaptive tessellation method can precisely measure error for every point of the limit surface. Hence, it has complete control of the accuracy of the tessellation result. Cracks are avoided by using a recursive color marking process to ensure that adjacent patches or subpatches use the same limit surface points in the construction of the shared boundary. The new method performs limit surface evaluation only at points that are needed for the final rendering process. Therefore it is very fast and memory efficient. The new method is presented for the general Catmull-Clark subdivision scheme. But it can be used for any subdivision scheme that has an explicit evaluation method for its limit surface.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2009.05b
• /
• pp.213-217
• /
• 2009

Underground structures are built into concrete like a architecture and public works. Concrete has watertightness as such, But buildings are leaking from the cracks. Recently, construction method do a lot of close construction in the downtown area. So architects are using the method for the outer layer of a two-layer wall to save spaces. They have been using Top-down method and waterproof agent method and others to outer layer of a two-layer wall method. But, There are many leakage in underground structure from lack on requirements performance of materials. Therefore, I hope to test the outside Waterproof Method of Ground using Wire-mesh and Non-hardening Viscosity Waterproof. In addition to, I wish to apply as outside waterproof method for the section for the outer layer of a two-layer wall in underground structure.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• v.14 no.1
• /
• pp.43-56
• /
• 2010

The representative numerical algorithms to solve the time dependent Navier-Stokes equations are projection type methods. Lots of projection schemes have been developed to find more accurate solutions. But most of projection methods [4, 11] suffer from inconsistency and requesting unknown datum. E and Liu in [5] constructed the gauge method which splits the velocity $u=a+{\nabla}{\phi}$ to make consistent and to replace requesting of the unknown values to known datum of non-physical variables a and ${\phi}$. The errors are evaluated in [9]. But gauge method is not still obvious to find out suitable combination of discrete finite element spaces and to compute boundary derivative of the gauge variable ${\phi}$. In this paper, we define 4 gauge algorithms via combining both 2 decomposition operators and 2 boundary conditions. And we derive variational derivative on boundary and analyze numerical results of 4 gauge algorithms in various discrete spaces combinations to search right discrete space relation.

• Journal of Advanced Marine Engineering and Technology
• /
• v.19 no.3
• /
• pp.91-98
• /
• 1995

To control speed or torque of induction motors, scalar control method that regulates the value of stator current had been used conventionally. But, vector control method which contrls the direction and the value of stator current at the same time has been introduced lately and employed widely. This paper describes comparative analyses of above two methods by computer simulation. As a result of the simulation, both methods showed good responses for high speed, but, vector control method characterized much better performance for low speed and sinusoidal input.