• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.5D
• /
• pp.587-595
• /
• 2008

Many studies on bus scheduling optimization have been done from the 1960s to recent years for establishing rational bus schedule plan that can improve convenience of bus passengers and minimize unnecessary runs. After 2000, as part of the Intelligent Transport Systems (ITS), the importance of the schedule management and providing schedule information through bus schedule optimization has become a big issue, and much research is being done to develop optimization models that will increase bus passenger convenience and, on the side of bus management, minimize unnecessary bus operation. The purpose of this study is to calculate the optimal bus frequency and create a timetable for each bus stop by applying DTR or DTRC model that use data for each bus stop and route segment. Model verification process was implemented using data collected from bus management system (BMS) and integrated transit-fare card system for bus route of Seoul's No. 472 line. In order to evaluate the reliability and uncertainty of optimal solution, sensitivity analysis was implemented for the various parameters and assumptions used in the bus scheduling model.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.16 no.6
• /
• pp.112-123
• /
• 2017

The accurate forecasting of the public transportation's transit and arrival time has become increasingly important as more people use buses and subways instead of personal vehicles under the government's public transportation promotion policy. Using bus management system (BMS) data, which provide information on the real-time bus location, operation interval, and operation history, it is now possible to analyze the bus schedule reliability. However, the punctuality should always be considered together with the operation safety. Therefore, this study suggests a new methodology to secure both reliability and safety using the BMS data. Unlike other studies, we calculated the bus travel time between two bus stops by dividing the total travel length into 6 sections using 5 different measuring points. In addition, the optimal travel time for each bus route was proposed by analyzing the mean, standard deviation and coefficient of variation of the each section's measurement. This will ensure the reliability, safety and mobility of the bus operation.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.8 no.2
• /
• pp.1-13
• /
• 2009

Although enormous data have been collected in major cities (Korea) by APTS(Advanced Public Transit Systems), most of studies related to bus schedule management evaluation have confined to headway adherence and on-time performance. Therefore, bus operation management have been very lack of using APTS data. This study uses coefficient of correlation to evaluate bus company's schedule management level. However, direct application of coefficient of correlation has inequitable problem because of many limitation(number of vehicle, headway, etc). and so variable calibration method was developed and applied to cope with these problems. Thus, demand-elastic management evaluation index was developed. For verifying the equity of developed index, it is applied to Seoul bus routes. It is expected for the developed index to contribute into the demand-elastic management of bus schedule.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.7 no.6
• /
• pp.1-11
• /
• 2008

As bus is realized by economical, environmental transportation that is available mass transport than car, various policy for improvement of services is achieved. As innovative public transportation systems like BMS (Bus Management System) have established, it is possible to manage bus service efficiently. However, the present bus service management system mainly focuses on enhancing service reliability represented by schedule adherence index. This study discusses the necessity of a special management for bus bunching phenomena at stops, and develops two kinds of bus bunching indices based on the Number of Berth and the Average Bus Arrival Rate. The bus bunching indices were measured by utilizing the bus operational information from BMS at the Seoul TOPIS(Transportation & Information Service). In order to evaluate the sensitivity of the Indices, the indices were applied to two different bus groups: buses on exclusive bus median lane, and regular (shared) lanes. As analysis result, is bunching as is near in downtown and is bunching to peak time morning than the afternoon. Compared with the schedule adherence index, the suggested indices were proved as an efficient complementary indices in the evaluation of the bus operational performance. The results of index comparison between exclusive bus median lane and shared lanes can promote the expansion of exclusive bus median lane. Moreover, it can also be used as a reference in deciding bus station scale including the Number of Berth and the route adjustment plan.

• Proceedings of the Safety Management and Science Conference
• /
• 2000.05a
• /
• pp.97-110
• /
• 2000

Production schedule and realization quantity of Large type bus [929(HD), 928, 928-A(SD), 937E/L, 937/L,] were analyzed in order to intruoduce FMS(Flexible Manufacturing System) appropriate for varities of customer desire and multi-item, small lot production. And this paper is aimed to propose introduction method of FMS, analyzing zig tools change times and idle times with production line and workers as an object. According to analysis results, only simple spec., depending on bus type, changed with decrease in production. For 929(HD), 928,928-A(SD), 937Eh, 937/L bus type, there was no harmony between schdule and realization. Therefore, it caused many difficulties in part supply. And there was loss of manpower and reduction of productibility due to idle time of process with bus type change. Production processes were operated inefficiently because tact time exceeded or shortaged of allow time.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.67 no.3
• /
• pp.343-351
• /
• 2018

Renewable energy sources has drawn considerable attention as clean energy sources because of changing public attitudes regarding greenhouse gas and fine dust. Recently, in this respect, the government provides the drivers of electric vehicles with various benefits such as tax reduction, financial incentives and free parking from the public to the private sector. Plug-in electric vehicles are the most common in the private sector. Otherwise, different types of battery-based buses in the public sector are being developed, and there are three main types of charging: plug-in, battery swapping and wireless. Therefore, economic assessment of charging types in each bus route is required in order to facilitate the use of battery-based buses instead of the existing CNG buses. In this paper, net present value(NPV) and B/C ratio of charging types are evaluated in consideration of the bus schedule, the cost of charging station, and the life cycle of battery, etc. per each bus route. In case study, main bus routes in Daegu City are simulated with the proposed evaluation method to validate the eco-bus project.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.55 no.6
• /
• pp.242-248
• /
• 2006

This paper proposes a coordinated control method for under-load tap changers (ULTCs) with shunt capacitors to reduce the operation numbers of both devices. The proposed method consists of two stages. In the first stage, the dispatch schedule is determined using a genetic algorithm with forecasted loads to reduce the power loss and to improve the voltage profile during a day. In the second stage, each capacitor operates according to this dispatch schedule and the ULTCs are controlled in real time with the modified reference voltages considering the dispatch schedule of the capacitors. The performance of the method is evaluated for the modified IEEE 14-bus system. Simulation results show that the proposed method performs better than a conventional control method.

• Industrial Engineering and Management Systems
• /
• v.13 no.2
• /
• pp.172-184
• /
• 2014

Economic growth with rising household income has put more vehicles on the roads worsening traffic congestion, road accidents, and air and noise pollution. This situation is further aggravated by the potential working population who choose to drive to work instead of taking public transportation. Public bus transport (PBT) plays an important role in alleviating these problems. PBT is underutilized in Malaysia, and there is an opportunity to increase ridership without substantial investment. Therefore, this study was conducted to investigate the factors that influence the use of PBT in Malaysia. The data were collected using structured questionnaires from 400 respondents. The results of the analysis show that the twin factors consisting of perceived satisfaction of and perceived importance by users towards safety and comfort of facilities and services offered by PBT are significantly related to intention to use those services. The satisfaction of availability of season tickets, the importance of reliability of bus schedule and time table, and the importance of ticket pricing are also significant. By providing insights for both public bus operators and the government, this paper contributes to mitigate the underutilization of PBT in Malaysia and the consequences of putting more vehicles on the roads. From the theory perspective, this paper also contributes by extending the theory of reasoned-action to transportation studies.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.3
• /
• pp.1674-1688
• /
• 2019

As environmental pollution and fossil fuel energy problems from fuel vehicle have occurred, the interest of electric vehicle(EV) has increased. EV industry and energy industry have grown dynamically in these days. It is expected that the next generation of primary transportation will be EV, and it is necessary to prepare EV infra and efficient energy management such as EV communication protocol, EV charge station, and smart grid. Those EV and energy industry fields are now on growth. Also, the study and development of them are now in progress. In this paper, distributed charge signal processing software for smart slow and quick EV charge is proposed and designed for dealing with EV charge demand. The software consists of smart slow and quick EV charge schedule engine and EV charge power distribution core. The software is designed to support two charge station types. One is normal EV charge station and the other is bus garage EV charge station. Both two types collect the data from EV charge stations, and then analyze the collected data. The software suggests optimized EV charge schedule and deliveries EV charge power distribution information to power switchboard system, and the designed software is implemented on embedded system. It is expected that the software provides efficient EV charge schedule.

• Journal of Korean Society of Transportation
• /
• v.27 no.1
• /
• pp.63-71
• /
• 2009

The purpose of this paper is to identify unreliable routes in the view of users. After headway error ratio per route and travel time error ratio per route were calculated by using BMS data, reliability which incorporated two indicators each route was calculated through data envelopment analysis. Reliability among routes and among traffic zones was compared through the results, the needs to improve severely unreliable routes and to show passengers adjusted bus schedule information considering current reliability were suggested. As a future study, reliability evaluation framework of each route needs to be developed considering operation environment by analyzing bus card data (passengers and operation speed etc.) and pooly unreliable route should be managed strictly and reformed.