• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.52 no.10
• /
• pp.584-592
• /
• 2003

This paper presents a fuzzy-GA method for the allocation and operation of dispersed generator systems(DGs) based on load model in composite distribution systems. Groups of each individual load model consist of residential, industrial, commercial, official and agricultural load. The problem formulation considers an objective to reduce power loss of distribution systems and the constraints such as the number or total capacity of DGs and the deviation of the bus voltage. The main idea of solving fuzzy goal programming is to transform the original objective function and constraints into the equivalent multi-objectives functions with fuzzy sets to evaluate their imprecise nature for the criterion of power loss minimization, the number or total capacity of DGs and the bus voltage deviation, and then solve the problem using genetic algorithm. The method proposed is applied to IEEE 12 bus and 33 bus test systems to demonstrate its effectiveness. .

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.54 no.5
• /
• pp.226-233
• /
• 2005

As the power demand has been increasing, a fault current problem is becoming more serious in real power system. Various ways like bus-split operation, transmission line open operation, are used in Korean power system for solving the problem. In this time, superconducting FCL(Fault Current Limiter) has been developed as a vary attractive alternative since HTS(High Temperature Superconductivity) was discovered. Korea, a project developing superconducting FCL to apply to 154kV transmission system is proceeding. Therefore, a power system analysis for SFCL application to power system is necessary, This paper presents the determination of quenching resistance and the selection of optimal cites when 154kV HTS-FCL is applied to Korean power system.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.11 no.1
• /
• pp.33-39
• /
• 2011

H.264 decoders usually have pipeline architecture by a macroblock or a 4 ${\times}$ 4 sub-block. The period of the pipeline is usually fixed to guarantee the operation in the worst case which results in many idle cycles and higher data bandwidth. Adaptive pipeline architecture for H.264 decoders has been proposed for efficient decoding and lower the requirement of the bandwidth for the memory bus. However, it requires a controller for the adaptive priority control to utilize the advantage. We propose a smart bus arbiter that replaces the controller. It is introduced to adjust the priority adaptively the QoS (Quality of Service) control of the decoding process. The smart arbiter can be integrated the arbiter of bus systems and it works when certain conditions are met so that it does not affect the original functions of the arbiter. An H.264 decoder using the proposed architecture is designed and implemented to verify the operation using an FPGA.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.52 no.9
• /
• pp.528-534
• /
• 2003

In this paper we propose the new method for calculating the Bus Incremental Cost using bus voltage magnitude and angle. And perform the decomposition of Bus Incremental Cost on power system operation. In this method, we calculate the Shadow Price that is derived from using power flow calculation results. The proposed Method is applied to IEEE-30 and the result shows the effectiveness of the method.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.4D
• /
• pp.527-538
• /
• 2011

Currently, the only established criteria is on the location of bus stops on principal roads where uninterrupted flow mainly occurs. There are no clear guidelines on any method to locating bus stops considering the characteristics of bus operation and pedestrians. If the location or exterior of a bus stop is inappropriate, road users including bus drivers and pedestrians will be caused serious dangerous and inconvenience. In this study, the research below was performed in order to propose rational criteria for the location of bus stops integrated with or separated from speed-change lanes at signalized intersections considering smooth traffic flow and the characteristics of bus operation and pedestrians as well as traffic safety : First, the appropriate length of each of the near-side and far-side bus stops was calculated by categorizing bus stops to be constructed into those integrated with speed-change lanes and those separated from speed-change lanes. Secondly, the appropriate length of each of the bus stops divided into near-side bus stops and far-side bus stops and integrated with or separated from speed-change lanes was selected by considering the characteristics of pedestrians. Thirdly, whether the construction locations of bus stops were appropriate or not was determined based on the appropriate length of bus stops integrated with or separated from speed-change lanes, which was calculated and selected by considering traffic flow and the characteristics of pedestrians and considering traffic safety. The method for locating bus stops considering traffic flow, the characteristics of pedestrians, and traffic safety will be able to help suggestion criteria of bus stop and the location of safe and pleasant bus stops.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.18 no.3
• /
• pp.1-13
• /
• 2019

The study examines preference between rural bus and call-a-bus before call-a-bus operation and empirically analyzes the effecting factors on the call-a-bus satisfaction after operation. As the result of log-linear model, older persons prefer call-a-bus because of door-to-door service convenience and female also because of limitation of trip moving means. It is shown that persons with lower number of trips prefer call-a-bus. As the result of ordinal regression model for call-a-bus satisfaction, age, the number of family members and bus stop distance have the positive tendency but the going out frequency and the return time negative among rural bus preference persons. Male and the going out frequence show the negative tendency but trip moving means, bus stop distance, rural bus satisfaction, depart and return time positive among call-a-bus preference persons. The persons who have the positive preference on call-a-bus shows higher satisfaction on call-a-bus.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.2297-2302
• /
• 2010

The status and effectiveness of Bi-modal Tram is analyzed through the comparison of the transport effectiveness and operation cost between the public transportation systems (bus, light rail transit) considering the vehicle and operation characteristic of new transit system Bi-modal Tram. The standard operation schedule is established in consideration of the vehicle specification and operation characteristic of main public transportation modes, and then the annual average operation cost is estimated depending on the volume, speed, analysis length for respective public transportation mode. Through analyzing the operation cost and distribution characteristic of public transportation modes depending on the transport volume and travel speed, the operational efficiency suitable for the city is derived. It is concluded that the operational efficiency of Bi-modal Tram is superior to that of the bus and light rail transit on the aspect of travel volume and operation speed.

• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.633-637
• /
• 2007

Bimodal Tram is the newly developed vehicle for both the tracked way and the public road. Its operation system has some characteristics including BIS(bus information system)/BMS(bus management system) based on ITS(intelligent Transportation system) which is used presently in public transportation operation system. One of them is more accurate vehicle fleet control based on both magnetic maker position reference system and GPS(global positioning system) and the other is automatic vehicle control for emergency situations by the Bimodal Tram operation system which will be performed by the unified control and operation center. This paper has investigated the requirements and functional definitions necessary to construct the unified control and operation center for Bimodal Tram operation system which will be more efficient and secure public transportation system than the conventional ones.

• 한국ITS학회:학술대회논문집
• /
• 2005.11a
• /
• pp.34-39
• /
• 2005

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.7 no.2
• /
• pp.1-12
• /
• 2008

Recently, the roll of bus transit is critical more than before because of the dramatical increase in congestions and oil prices, but bus companies seriously encounter into vicious circle situation such as decrease in passenger demand, income reduction, and revenue deterioration. To tackle this, major metropolitan cities, Seoul, Busan, DaeGu, etc. have introduced a semi-public system to reinforce public function of bus. However, it was resulted in side effects that the main board of bus company did not control theirselves voluntarily, and the management and control of public sectors on bus become very important elements. In this research, the types, limitations, and development of operation-management items, and a methodology for analysis, and changes in those trends are addressed under semi-public system using APTS data. Conclusively, this study could be one of the useful application results and alternatives for the operation-management policy of bus transit-related agencies.