• Journal of Agricultural Extension & Community Development
• /
• v.18 no.2
• /
• pp.281-313
• /
• 2011

67.82% of domestic hot springs are in rural areas. (Ministry of Public Administration and Security statistics, 2010) Most of hot spring's facilities are aging and inability to accommodate the current changes of leisure patterns. So, a decrease of the number of visitor to the hot spring resulted in economic decline of rural areas. Hot spring has been studied, but Architecture of Hot Springs has never been interested in and research. Therefore, Nation architecture of Hot spring and foreign architecture was compared and analyzed. Then, Architectural characteristics of Hot spring in rural areas was identify. The architecture of Hot spring type of foreign and images are routinely burned, the organic form and old-fashioned adrift. However, our country found in Hot spring architecturally and daily life had any features. Thus, the country's hot springs spa area for construction of the architecture design should be characterized. And, through institutional guidelines and deliberations should be provided in the right direction.

• 한국공간정보시스템학회:학술대회논문집
• /
• 2005.05a
• /
• pp.459-462
• /
• 2005

위성화상 또는 항공사진을 이용하여 산화지를 탐지하고 정량화하기 위한 여러 가지 방법적인 시도가 있었다. 보다 정확한 산화지 탐지를 위해, 본 연구에서는 기존의 고해상도 범색화상과 중 저해상도 다중분광 화상의 융합(fusion)에 주로 이용되었던 IHS(Intensity, Hue, Saturation) 색채변환을 산화지 탐지와 정량화에 적용하였다. IHS 색채변환을 이용한 Hue 조합화상의 산화지 최대우도분류 결과는 Landsat-7 ETM+ 7:4:1 조합화상보다 놀은 사용자분류 정확도를 나타냈으며 색상(Hue)과 채도(Saturation)가 명도(Intensity)에 비해 ETM+ 화상의 분광특성을 잘 반영하였다.

• Journal of Welding and Joining
• /
• v.21 no.4
• /
• pp.56-62
• /
• 2003

MIG brazing is used for many parts without melting base metal because of high productivity. Pulsed MIG brazing can be used to further reduce heat input and to improve the process stability. However, a significant amount of zinc in galvanized sheet steel is burned off in the area of brazes. Therefore, the brazing method to reduce the heat input is needed. In the brazing for galvanized sheet steel, variable polarity AC pulse MIG arc brazing can be applied to more decrease the heat input by setting EN-ratio adequately. In this research, we studied for the variable polarity AC pulse MIG arc brazing to decrease the heat input by using ERCuSi-A wire. As the result of increasing EN-ratio, melting ratio of base metal and burning off of zinc were reduced in galvanized sheet steel.

• Journal of Advanced Marine Engineering and Technology
• /
• v.28 no.4
• /
• pp.632-640
• /
• 2004

The purpose of this study is to clarify the influence of inert gas on the configuration characteristics of premixed turbulent propagating flames of hydrogen mixtures. Inert gas is changed to $N_2$, Ar, $CO_2$ and He keeping the laminar burning velocity of mixtures nearly the same value. A laser tomography technique was used to obtain the flame shape, and quantitative analyses were performed. The result shows that in the wrinkled laminar flame region, the surface area of turbulent flame is slightly dependent on the equivalence ratio and the kind of inert gas. It is also shown the region of convex part of flame toward the unburned gas is greater than that of toward the burned gas regardless of the kind of inert gas.

• Journal of the korean Society of Automotive Engineers
• /
• v.6 no.2
• /
• pp.64-75
• /
• 1984

In the engine design, it will be able to higher compression ratio and decreasing the cylinder size, if improve the vaporization of fuel and increasing the mass burned fraction in the kerosene engine. Therefore, concave, convex and straight types of hear ring set up neighborhood intake valve into the combustion chamber. The vaporization effect of fuel satisfied by heat transfer from the heat ring, but have need of selection of the location and surface area of the heat ring. Also, combustion duration of the combustion chamber with concave heat ring shorter than combustion chamber with other two types of heat ring, and about 30percent decreases in combustion duration as compared with combustion chamber without heat ring.

• Journal of Oral Medicine and Pain
• /
• v.7 no.1
• /
• pp.77-85
• /
• 1982

Identification of blood group from dental hard tissue for the purpose of individual identification of a highly burned corpse would play a significant role in a practical legal medicine. The author conducted a study of blood group with teeth left stading at a high temperature by the method of elution test. The following results were obtained. 1. The blood identifcation from heated dental hard tissue proved to be possible. 2. In cases of heat-treated theeth at $100^{\circ}C$ for 120 minutes, at $150^{\circ}C$ for 120 minutes and at $200^{\circ}C$ for 45 minutes for A.B.O(H) blood group, the identification of blood group was possible. 3. In case of heat-treated teeth, thermostability of blood group was found to be $150^{\circ}C$. 4. The adequate surface area for the detection of blood group was 40-80 meshes.

• Corrosion Science and Technology
• /
• v.6 no.3
• /
• pp.112-119
• /
• 2007

This paper presents the importance of corrosion control and protection technology with a real case study of heater tube rupture damaged by High temperature H2S-H2 corrosion in the refinery. The heater was operated at the Hydrocracking unit and the operation temperature and pressure was $340^{\circ}C$ and $18kg/cm^{3}$ respectively. Top side of the convection tube was thinned by high temperature hydrogen sulfide and hydrogen gas as a uniform corrosion and finally ruptured under operation pressure. Damaged area (Convection tube zone) was blocked by protection wall, so it was impossible to inspect with conventional nondestructive examination. Instead the elbow area which is out of the protection wall was inspected regularly to evaluate the corrosion rate of convection tube indirectly. However the operation temperature and the phase of the process stream was different between inside the chamber and outside the chamber. As a result, it caused severe corrosion to the horizontal convection tube inside the chamber comparing to the elbow outside the chamber. Finally convection tube was corroded more rapidly than the elbow and ruptured after 13 years operation. Because of the rupture, the heater was totally burned and the operation was stopped for 3 months until it has been reconstructed. To prevent this kind of corrosion problem and accident, corrosion control should be strengthened and protection technology should be improved.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.8 no.1
• /
• pp.71-79
• /
• 2008

To find out the effect of the vegetation recovery and the problems of forest land, the researches of the mortality in pine stand and vegetation recovery have been carried out from the burned site. In area which is damaged by fire scar on crown and stem, rate of dead is higher. Where stand growing stocks were totally damaged by crown forest fire, most of vegetation was recovered by sprouts and planted seeds. Vegetation recovery power were depending on the condition of soil depth condition. For the artificial recovery, the damage happened by insects in the planted birches plantation. Rate of growth was somewhat different between Pinus densiflora and Pinus thunbergii in the plantation, because of individual growth rate.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.28 no.1
• /
• pp.21-28
• /
• 2010

Forest fire is one of the main factor disturbing the environment of forest, and it influences greatly the structure and function on forest. The process of vegetation recovery could be decided according to the extent of the damage. It is required a lot of man powers and budgets to understand born severity and process of vegetation rehabilitation at the damaged area after large-fire. However, the analysis of born severity in the forest area using satellite imagery can acquire rapidly information and more objective results remotely in the large-fire area. In this study, the space sensors have been used to map area burned, assess characteristics of active fires. For classifying fire damaged area and analyzing severity of Cheongyang-Yesan fire in 2002, in this paper we use pre- and post-fire imagery from the Landsat TM and ETM+ to compute the evaluate large-scale patterns of burn severity, use the digital stock map to calculate the damaged condition about the forest fires damaged regions and use the NDVI to monitoring the situation of the revegetation.

• Journal of Korean Society of Forest Science
• /
• v.95 no.3
• /
• pp.365-369
• /
• 2006

This study was conducted to clarity the differences in density and body weight of rodents among unburned and two burned areas (silvicultured and natural restored areas) after forest fire from July to September 2004 in coniferous forest of Samcheok, Korea. The density of rodents was the least in the silvicultured area. There was no differences in density between the unburned and natural restored areas. Also, mean body weight of rodents in the natural restored area was higher than in the silvicultured area. Shrubs, seedlings, snags and CWD (coarse woody debris) would be good for inhabitation of the rodents in forest fired area. Therefore, coverage of understory layer should be maintained in forest fired area.