• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 하계종합학술대회 논문집(2)
• /
• pp.301-304
• /
• 2001

The analog multiplier is very useful building block in many circuits such as filter, frequency-shifter, and modulators. In recent year, The main design issue of circuit designer is low-voltage/low-power system design, because of all systems are recommended very integrated system and portable system In this paper, the proposed the four-quadrant analog multiplier is using the bulk-driven techniques. The bulk-driven technique is very useful technique in low-voltage system, compare with gate-driven technique. therefore the proposed analog multiplier is operated in 1V supply voltage. And the proposed analog multiplier is low power dissipation compare with the others. therefor the proposed analog multiplier is convenient in low-voltage/low-power in system.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2002년도 종합학술발표회 논문집 Vol.12 No.1
• /
• pp.54-58
• /
• 2002

This paper describes the theoretical analysis and performance of a 2.4㎓ bulk-driven downconversion mixer, where the LO signal is input via the bulk. A mixer core designed with a 0.18$\mu\textrm{m}$ CMOS process is able to operate under 0.8V∼1V supply voltage. The RF, LO, and IF port frequencies are 2.45㎓, 2.4㎓, and 50MHz, respectively. The measurement results exhibit conversion gain of -1.8㏈, l㏈ compression point of -17㏈m and IIP3 of -4㏈m with 0㏈m LO power. The power consumption is as small as 4mW.

• 대한전기학회논문지:전력기술부문A
• /
• 제48권4호
• /
• pp.461-466
• /
• 1999

A CMOS op amp with rail-to-rail input and output ranges is designed in a one-volt supply. The output stage of the op amp is used in a common source amplifier that operates in sub-threshold region to design a low voltage op amp with rail-to-tail output range. To drive heavy resistor and capacitor loads with rail-to-rail output ranges, a common source amplifier which has a low output resistance is utilized. A bulk-driven differential pair and a bulk-driven folded cascode amplifier are used in the designed op amp to increase input range and achieve 1 V operation. Post layout simulation results show that low frequency gain is about 58 ㏈ and gain bandwidth I MHz. The designed op amp has been fabricated in a 0.8${\mu}{\textrm}{m}$ standard CMOS process. The measured results show that this op amp provides rail-to-rail output range, 56㏈ dc gain with 1 MΩ load and has 0.4 MHz gain-bandwidth with 130 ㎊ and 1 kΩ loads.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.14-16
• /
• 2009

Surface driven switching of the liquid crystal bulk arising from the coupling between an applied electric field and a polarized state of a nematic liquid crystal, both localized at the substrate surface, is reported. Fast switching is demonstrated in a hybrid aligned nematic cell with a fringe electric field generated by comb-like electrode structure.

• 한국항해항만학회지
• /
• 제46권5호
• /
• pp.441-448
• /
• 2022

The aim of this study was to examine determinants of secondhand Bulk carrier and Oil tanker prices. This study compiled S& P transaction data taken from the Clarksons Research during J anuary 2018 to April 2022 to see how independent variables influenced secondhand ship prices. In the secondhand ship pricing model of entire segments, size, age, and LIBOR showed significant effects on prices. A vessel built in J apan and Korea was traded at a higher price than a vessel built in other countries. In the bulk segment, size, age, Clarksea index, LIBOR, and inflation were meaningful variables. In the Tanker segment, unlike Bulk carrier, only size and age were useful variables. This study performed regression analyses for various sizes of Bulk carriers and Oil tankers. It verified that impacts of variables other than ship size and age were significantly associated with ship type and size while macroeconomic variables had no influence except for bulk carriers. By applying diverse variables affecting secondhand ship price estimation according to various sizes of Bulk carriers and Oil tankers, this study will expand the scope of practical application for investors. It also reaffirms prior research findings that the secondhand ship market is primarily market-driven.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2017년도 추계학술대회
• /
• pp.425-428
• /
• 2017

본 논문에서는 진동 에너지를 이용하여 에너지를 수확하는 전파 정류 하베스팅 회로를 설계하였다. 설계된 회로는 저전압에서도 전력효율이 우수하도록 Beta-Multiplier를 이용하여 Body-Bias technique을 Negative Voltage Converter에 적용하였으며, Comparator를 Bulk-Driven type으로 설계하였다. 제안된 회로는 $0.35{\mu}m$ CMOS 공정으로 설계하였으며, 설계된 회로의 칩 면적은 $931{\mu}m{\times}785{\mu}m$이다.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2015년도 추계학술대회
• /
• pp.477-480
• /
• 2015

본 논문에서는 MPPT(Maximum Power Point Tracking) 제어 기능을 갖는 저전압 진동에너지 하베스팅 회로를 제안한다. 제안된 회로는 Bulk-driven technique을 적용하여 0.8V의 낮은 전압에서도 동작 가능하다. 압전소자의 출력단에 연결된 전파정류기의 개방회로 전압을 MPPT 제어회로를 통해 주기적으로 샘플링하고, 최대 가용전력 점의 전압을 부하에 전달한다. 제안된 회로는 0.35um CMOS 공정으로 설계되었으며, 패드를 포함한 칩 면적은 $1.33mm{\times}1.31mm$이다. 모의실험결과 설계된 회로의 최대 전력효율은 85.49%이다.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2016년도 추계학술대회
• /
• pp.520-523
• /
• 2016

본 논문에서는 MPPT(Maximum Power Point Tracking) 기능을 갖는 열에너지 하베스팅을 위한 DC-DC컨버터를 설계하였다. 설계된 회로는 열전소자로부터 수확된 낮은 전압을 변환하여 부하에 승압된 전압을 공급한다. 시동회로는 제어기가 동작할 수 있는 VDD를 공급하고 결과적으로 Main 부스트 변환기의 파워스위치를 ON/OFF하게 되며, 스위칭 동작을 통해 부하에 승압된 전압을 공급한다. Bulk-driven 비교기를 이용하여 낮은 전압에서도 비교동작을 가능하게 하였고, 이를 이용하여 시스템 효율을 높이고, 전압안정화 동작을 하게 된다. 최대 효율은 76%이다. 제안된 회로는 0.35um CMOS 공정으로 설계되었으며, 모의실험을 통하여 동작을 검증하였다. 설계된 회로의 칩 면적은 $933um{\times}769um$이다.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2016년도 추계학술대회
• /
• pp.533-536
• /
• 2016

본 논문에서는 진동 에너지를 이용한 MPPT 제어기능을 갖는 에너지 하베스팅 회로를 설계하였다. Body-bias technique과 bulk-driven technique을 이용하여 저전압에서도 높은 효율특성을 갖는 고성능 AC-DC 변환기를 제안하고 진동에너지 하베스팅 회로 설계에 적용하였다. MPPT (Maximum Power Point Tracking) 제어는 진동소자의 개방회로전압과 MPP 전압간의 관계를 이용하였으며, 진동소자의 개방회로전압을 주기적으로 샘플링 함으로써 이를 이용해 MPPT 기준전압을 생성하고, 이를 기준으로 부하로의 에너지 공급을 제어한다. $0.35{\mu}m$ CMOS 공정으로 설계된 회로의 칩 면적은 $1.21mm{\times}0.98mm$이다.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2003년도 종합학술발표회 논문집 Vol.13 No.1
• /
• pp.91-95
• /
• 2003

In this work, we have designed Gilbert cell downconversion mixer using 0.25um Anam CMOS process, we also have analyzed Conversion gain and IIP3 using Taylor series in our own unique way. Especially, bulk terminal is used as LO( Local Oscillator) input for reduction of power consumption and supply voltage. Supply voltage used in this design is lower than 1.8V and core current is less than 500uA. The simulation experiments showed that the conversion gain, IIP3, and power consumption were -1dB, 4.46dBm, and 0.8mW, respectively.