• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2011.06a
• /
• pp.399-401
• /
• 2011

반잠수식 시추선의 주선체(lower hull)를 세 가지 타입으로 설계하여 주선체에 대한 유체정역학적 계산, 조종성능 및 내항성능 계산 그리고 이론계산을 수행하여 wave distribution과 height도 각각 비교 분석하였다. 주선체의 Convention type, Bulbous bow type, 그리고 Ice breaking type 중 Ice breaking type 선형의 성능이 가장 우수하였다. 다음으로는 반잠수식 시추선의 모든 조건(작업, 이동, 생존)에서 주기둥(column) 또는 주선체(Lower)가 손상되어 부력을 상실했을 시 전복 되지 않도록 고안된 예비부력 기능과 기름 유출 사고시 기름을 회수 할 수 있는 기능을 갖춘 유회수 겸용 예비부력 탱크를 개발하였다.

• Journal of the Society of Naval Architects of Korea
• /
• v.29 no.3
• /
• pp.1-14
• /
• 1992

Using form parameters representing geometric characteristics of the form, this paper attempts the generation of 3-D free surface given in terms of B-spline surface equation. This is achieved by coupling the form parameter decision, Coons surface of the form parameters, and B-spline. To check the validing of the present method, a analogous surface to the bulbous bow was generated.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.10 no.6
• /
• pp.683-691
• /
• 2018

Numerical simulations of turbulent flows around KCS have been performed to study the sensitivity of ship resistance to wall-adjacent grids and disclose the influence of near-wall treatment on the sensitivity of ship resistance. The resistance coefficients of viscous and pressure forces were compared when using realizable $k-{\varepsilon}$ and SST $k-{\omega}$ turbulence models in structured and unstructured grids, respectively. The calculation of friction velocity was found to be mainly responsible for the reduction of viscous and total resistances when the height of wall-adjacent cells increased. Since the assumption of equilibrium state between turbulent production and dissipation was not met in a bulbous bow, it was more reasonable to iteratively calculate the friction velocity from empirical laws of the wall for near-wall treatment rather than explicitly estimate it from the turbulent kinetic energy.

• Journal of Navigation and Port Research
• /
• v.37 no.5
• /
• pp.481-486
• /
• 2013

In this study, a commercial seakeeping program Seakeeper, integrated into Maxsurf, which is based on the linear strip theory was employed to compare the effect of bulbous bow (with/without) on motion response characteristics in a 18-meter catamaran. The seakeeping analyses were conducted at several Beaufort wind conditions such as scale No. 3 ($\bar{T}=2.98s$, $H_{1/3}$ =0.6m), No. 4 ($\bar{T}=3.85s$, $H_{1/3}$ =1m) and No. 5 ($\bar{T}=5.44$, $H_{1/3}$ =2m) based on ITTC wave spectrum. Pitch motion response spectrum was calculated at Head sea, Head & bow sea and Beam sea as encounter angles. Hull form of a catamaran with bulb showed the maximum 20% decrease of pitch motion response as compared to that of hull form without bulb.

• Journal of Advanced Research in Ocean Engineering
• /
• v.3 no.2
• /
• pp.83-101
• /
• 2017

In this study, the added resistances of the large container ship in head and oblique seas are evaluated using a time-domain Rankine panel method. The mean forces and moments are computed by the near-field method, namely, the integration of the second-order pressure directly on the ship surface. Furthermore, a weakly nonlinear approach in which the nonlinear restoring and Froude-Krylov forces on the exact wetted surface of a ship are included in order to examine the effects of amplitudes of waves on ship motions and added resistances. The computation results for various advance speeds and heading angles are validated by comparing with the experimental data, and the validation shows reasonable consistency. Nevertheless, there exist discrepancies between the numerical and experimental results, especially for a shorter wave length, a higher advance speed, and stern quartering seas. Therefore, the accuracies of the linear and weakly nonlinear methods in the evaluation of the mean drift forces and moments are also discussed considering the characteristics of the hull such as the small incline angle of the non-wall-sided stern and the fine geometry around the high-nose bulbous bow.

• Journal of the Society of Naval Architects of Korea
• /
• v.34 no.4
• /
• pp.72-83
• /
• 1997

The purpose of present study is to find an appropriate hull shape of a container ship which can operate along the coast and through canals. A 200TEU class container ship is designed with dimensional modifications of an existing 140TEU container ship which is a domestic coastwise vessel. For the fore-body shape including bulbous bow. additional modification is done by changing the sectional area curve and frameline shape using the data of series resistance test. The model tests are performed in the towing tank to measure total resistance sinkage and trim of the model. And a finite-difference method based on MAC method is utilized to analyze the flow field around the ships in deep and restricted water. From the result of model test and numerical analysis, the resistance characteristics of the designed hull form are predicted.

• Journal of the Society of Naval Architects of Korea
• /
• v.54 no.2
• /
• pp.83-89
• /
• 2017

Numerical simulations of ship resistance have been performed to compare spatial characteristics of Courant number when using structured and unstructured meshes. When Euler scheme was used for time integration, the structured mesh provided a more efficient calculation because the calculation time interval was larger than that of unstructured mesh. The automatic generation of very small meshes in the unstructured mesh was mainly responsible for the limitation of calculation time interval. When local time stepping Euler scheme was applied, however, the ship resistance of unstructured mesh showed a rapid convergence while a slow convergence of ship resistance in structured mesh was caused by the small time interval in bulbous bow.

• Journal of the Society of Naval Architects of Korea
• /
• v.31 no.3
• /
• pp.31-37
• /
• 1994

When a lot of input data are not distributed uniformly n a chord-span direction or when the given shape is complicated, it is very difficult to obtain an inverse matrix which represents the smooth Bi-cubic B-spline surface of the initial shape. To overcome this problem, we suggest image Surface Expansion Method(ISE Method) which is suggested for vertex creation of B-spline curves and surfaces. Its basic concept, convergency and verification are shown. Also B-spline curves and Surfaces represented by ISE Method were compared with those represented by the existing method which is based on the inverse matrix method, the pseudoinverse matrix method and the chord length approximation method for vertex yielding. Ship Hull Forms which have Knuckle, Bulbous Bow, Transom and Stern frame were represented by the ISE Method.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.7
• /
• pp.844-853
• /
• 2014

Since the active sonar for a naval vessel is usually installed in a bulbous bow, GRP(Glass reinforced plastic) material with low density and high strength is used for the material of the sonar dome window in order to prohibit impact by slamming wave or foreign material in the sea. The structural safety of the sonar dome is varied according to the interior and exterior distributed pressure on the sonar dome. Therefore, the variation of the structural safety according to the pressure variation of the sonar dome window caused by the drain valve state is studied by CAE.

• Journal of the Society of Naval Architects of Korea
• /
• v.51 no.4
• /
• pp.334-341
• /
• 2014

Due to the rise of international oil prices, with the continued increase of vessel operating costs, profitability has gradually deteriorated in the some case of South Korea ferry shipping. Therefore, it is necessary to improve the resistance performance of passenger ship. Goose neck bulb can be one of the methods to improve the resistance performance of passenger ship. Goose neck bulb has been applied to passenger ships operated in Europe and large cruise line. But there is no application example in the passenger ship to be operated on a regular basis in the sea near Korea. It is needed to provide reference data that can be applied efficiently goose neck bulb on the medium-sized passenger ships. This study, intended for the medium-sized passenger ship operated short international routes, presents the design of the hull form that goose neck bulb has been applied. And the resistance performance of the designed hull confirmed by numerical simulation. The numerical simulation is performed while changing the local shape of the goose neck depending on the bulb parameters. This study finds bulb parameters and their range that can affect the resistance performance. Thus, it is possible to provide a foundation to develop the optimal design technique and regression analysis on the resistance performance and goose neck bulb.