• International journal of advanced smart convergence
• /
• v.7 no.4
• /
• pp.50-56
• /
• 2018

The Internet of Things (IoT) and Visible Light Communication (VLC) is opening up new services in lighting industry by integrating sensory network features in addition to standard illumination functionality. In this progressive developments, the next generation lighting devices for smart homes are capable to sense the environmental conditions and transfer the captured data through lights to gateway controller to access remotely. The smart home environmental sensor information's are few kbps only so VLC systems need to built-in with low rate light connectivity to transfer data to the gateway. To provide error free communication, the quality of a received light signal is important to be considered when designing an VLC receiver. Therefore, this paper proposes the design of robust low rate IoL receiver design using NCP302 voltage detector for micro controller to adapt the IoT/IoL front end module for system integration. To evaluate the proposed system performance, the Arduino UNO based IoT/IoL controller designed with lighting, sensors and lights connectivity interfaces. The experimental result shows that the robust interference rejection is feasible on proposed VOL receiver and possible to have an error-free communication up to 10 kbps at a low SNR using OOK modulation.

• Convergence Security Journal
• /
• v.24 no.2
• /
• pp.55-61
• /
• 2024

With the development of IoT technology, wearable services have also developed rapidly. Wearable devices required for this service are used as sensors and controllers in the form of smart bands. Wearable devices implement very concise SWlogic for possible long-term use and use wireless communication protocols to improve convenience. However, because this wearable device aims to be lightweight, it is more vulnerable to security than terminals used for other information services. Many smart healthcare or smart medical services are passive or do not apply security technology. By exploiting this security environment, attackers can obtain or modify important information through access to wearable devices. In this study, we analyzed the technical operating environment of wearable services and identified authentication information reuse attacks, BIAS attacks, battery drain attacks and firmware attacks on wearable devices. And we analyzed the mechanism of each security threat and confirmed the attack effect. In this study, we presented a response plan to respond to the identified security threats. When developing wearable services, it is expected that safer services can be built if the response plan proposed in this study is considered.

• Journal of Advanced Navigation Technology
• /
• v.28 no.5
• /
• pp.754-759
• /
• 2024

In this paper, we implemented a detection and surveillance system using webcam and thermal camera modules as a method to counter various crimes that are increasing in modern society. For human detection using a webcam, we applied a detection method called Haar-like features, which utilizes the characteristics of dark and bright areas in different parts of the face. We also integrated two approaches, one is a contactless method that detects the infrared radiation emitted from the subject and displays information, and the other is a method that detects infrared radiation emitted from the human body and displays thermal images using an interpolation technique. To accomplish this, we equipped Raspberry Pi with these two modules and built the system. It is expected that by using this interpolation technique, the efficiency of recognition information will be enhanced when integrating with various information sensors in the future.

• Journal of Korea Water Resources Association
• /
• v.49 no.6
• /
• pp.469-480
• /
• 2016

The present study aims to develop a real-time surface image velocimeter (SIV) using an Android smartphone. It can measure river surface velocity by using its built-in sensors and processors. At first the SIV system figures out the location of the site using the GPS of the phone. It also measures the angles (pitch and roll) of the device by using its orientation sensors to determine the coordinate transform from the real world coordinates to image coordinates. The only parameter to be entered is the height of the phone from the water surface. After setting, the camera of the phone takes a series of images. With the help of OpenCV, and open source computer vision library, we split the frames of the video and analyzed the image frames to get the water surface velocity field. The image processing algorithm, similar to the traditional STIV (Spatio-Temporal Image Velocimeter), was based on a correlation analysis of spatio-temporal images. The SIV system can measure instantaneous velocity field (1 second averaged velocity field) once every 11 seconds. Averaging this instantaneous velocity measurement for sufficient amount of time, we can get an average velocity field. A series of tests performed in an experimental flume showed that the measurement system developed was greatly effective and convenient. The measured results by the system showed a maximum error of 13.9 % and average error less than 10 %, when we compared with the measurements by a traditional propeller velocimeter.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38C no.12
• /
• pp.1170-1178
• /
• 2013

Thanks to various benefits, low-cost real-time communication networks so called fieldbus have been widely used in many industrial applications including military systems, such as aircrafts, submarines, and robots. This paper presents a reliability analysis of dual-channel CAN(Controller Area Network) fieldbus which is used for controlling various equipment of submarine combat system. A submarine combat system playing a critical role to the success of missions and survivability consists of various devices including sensors/actuators and computers. Since a communication network for submarine combat system must satisfy an extremely high level of reliability, a dual channel technique is commonly adopted. In this paper, a Petri Net based reliability model for dual-channel CAN is discussed. A reliability model called generalized stochastic Petri Nets (GSPN) is built by utilizing the information on physical faults with CAN. The effectiveness of the proposed model is analyzed in terms of unreliability with respect to failure rate and repair rate.

• Journal of the Korea Convergence Society
• /
• v.8 no.2
• /
• pp.9-14
• /
• 2017

A fingerprint is unique to each person and can be represented as a digital form. As the fingerprint is the part of human body, fingerprint recognition is much more easy to use and secure rather than using password or resident card for user authentication. In addition, as the newly released smart phones have built-in camera and fingerprint sensors, the demand for biometric authentication is increasing rapidly. But, the drawback is that the fingerprint can be counterfeited easily and if it's exposed to the hacker, it cannot be reused. Thus, the original fingerprint template should be transformed for registration and authentication purposes. Existing transformation functions use passcode to transform the original template to the cancelable form. Additional module is needed to input the passcode, so it requires more cost and lowers the usability. In this paper, we propose biometric authentication scheme that is economic and easy to use. The proposed scheme is consisted of cancelable biometric template creation, registration and user authentication protocols, and can control several security levels by configuring the number of fingerprints and scan times. We also analyzed that our scheme is secure against the brute-force attack and the active attacks.

• 전자공학회논문지 IE
• /
• v.49 no.2
• /
• pp.52-57
• /
• 2012

Social development as well as the development of consumer electronic devices due to leakage, electric shock or fire, and many are exposed to the risk of leakage currents. Premises in the control cabinet, but the circuit breaker is installed, the existing circuit breaker shuts off when a short circuit in the control cabinet, installed only have the capability. Also connected to the outlet is installed byeokmada family of devices is not easy thing to check individually. In this paper, circuit breakers and circuit analysis and circuit performance, ZigBee-based premises of consumer electronics devices using sensors to monitor the health of the leakage can be presented on how. Performance analysis, the proposed ELB leakage current control system is built into the appliance leakage circuit breaker for each household appliances because the application can check the status of a short circuit, short circuit, over the existing system can be monitored easily.

• Journal of Sensor Science and Technology
• /
• v.11 no.3
• /
• pp.145-154
• /
• 2002

NiCr-heaters with three different thicknesses ranging from 400 nm to 800 nm were fabricated and their characteristics were compared for the purpose of developing a chromel-alumel multijunction thermal converter for low input voltage with low frequency. The thermoelectric effect-induced AC-DC voltage transfer difference of the thermal converter with a built-in NiCr-heater of 400 nm-thickness was ${\pm}0.51{\sim}1.69\;ppm$ in the DC reversing frequency of $40\;Hz{\sim}10\;kHz$ with appling $0.5\;V_{rms}$ and the difference was increased to ${\pm}40{\sim}{\pm}115\;ppm$ in the frequency of $40\;Hz{\sim}1\;MHz$, when both thermoelectric effects and frequency effects were considered, showing the thermal converter would be suitable for the low input voltage application with low frequency.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.6
• /
• pp.1475-1480
• /
• 2014

Wellness is IT fused with the user manage and maintain the health of a service can help you. If you are using an existing Fitness Center to yourself by choosing appliances that fit with the risk of injury in order to learn how the efficient movement had existed for a long time was needed. To resolve, use the personal training but more expensive cost of people's problems, and shown again in the habit of exercising alone will have difficulty. This paper provides a variety of smart phones based on a hybrid app with compatibility with the platform and personalized training market system. Users of the Fitness Center is built into smart phones in the history of their movement sensors or transmits to the Web by typing directly. This is based on exercise programs tailored to users via the training market. Personal training marketplace has a variety of users, check the history of this movement he can recommend an exercise program for themselves can be applied by selecting the. This provides users with the right exercise program can do long-term exercise habits can be proactive and goal setting.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.4
• /
• pp.851-858
• /
• 2018

In this paper, a temperature and humidity algorithm was proposed to enhance the economic efficiency and productivity of smart farm. The basic conditions of smart farms were analyzed, and the information exchange system between sensors and control objects in smart farms based on wireless communication was designed. Based on this, a temperature and humidity control algorithm was developed so that temperature, humidity and soil humidity within smart farm can be followed in predefined values for plant growth. To verify the validity of the proposed design methodology and control algorithm, a prototype of small scale smart farm based on 2.4GHz wireless communication were built and their validity was confirmed through repeated temperature and humidity test.