• Journal of Biosystems Engineering
• /
• 제38권1호
• /
• pp.33-40
• /
• 2013

Purpose: The goal of this study was to build an accurate digital factory that evaluates the performance of a factory using computer simulation. To achieve this goal, we evaluated the effect of worker-related variables on production in a simulation model using comparative analysis of two cases. Methods: The overall work process and worker-related variables were determined and used to build a simulation model. Siemens PLM Software's Plant Simulation was used to build a simulation model. Also, two simulation models were built, where the only difference was the use of the worker-related variable, and the total daily production analyzed and compared in terms of the individual process. Additionally, worker efficiency was evaluated based on worker analysis. Results: When the daily production of the two models were compared, a 0.16% error rate was observed for the model where the worker-related variables were applied and error rate was approximately 5.35% for the model where the worker-related variables were not applied. In addition, the production in the individual processes showed lower error rate in the model that included the worker-related variables than the model where the worker-related variables were not used. Also, among the total of 22 workers, only three workers satisfied the IFRS (International Financial Reporting Standards) suggested worker capacity rate (90%). Conclusions: In the daily total production and individual process production, the model that included the worker-related variables produced results that were closer to the real production values. This result indicates the importance of worker elements as input variables, in regards to building accurate simulation models. Also, as suggested in this study, the model that included the worker-related variables can be utilized to analyze in more detail actual production. The results from this study are expected to be utilized to improve the work process and worker efficiency.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2014년도 춘계 학술논문 발표대회
• /
• pp.272-273
• /
• 2014

Existing the free-form concrete segments (FCS) mold is produced by state of solid such as steel, wood, Styrofoam that can not be recycled. Using FCS mold result in delay on schedule and decrease of productivity because it consists of irregular curved variety and it requires more time than fixed mold. Thus, FCS mold should be developed which can reduce the costs and also it can be used as semipermanent. The aim of this study is to suggest of flexible mold production process for using the phase change materials(PCM). PCM is maintain that its solid state at low temperature but it changes phase to liquid state by heating. PCM is suitable material for flexible mold due to change of phase in relatively high temperature compare to other phase change materials such as water. Flexible mold is possible that reuse semi-permanently made by PCM. Thus, this study is proposed the process of flexible mold production for using the PCM. The study results will be used as the basic theory for studies on production and installation of FCS.

• 한국건설관리학회논문집
• /
• 제16권5호
• /
• pp.12-20
• /
• 2015

최근 건설프로젝트는 기존의 노동집약적 현장생산 방식이 아닌, 공장 생산 기반의 현장 조립 방식인 모듈러 건축물에 주목하고 있다. 모듈러 건축 공법은 기존 방식에 비해 공기 단축효과가 높고, 해체 및 재사용이 용이해 임시 주거시설을 중심으로 적용되고 있다. 그러나 모듈러 공법 실현을 위한 초기 투자비용에 대한 부담으로 인해 국내의 모듈러 건축시장은 아직 활성화되지 못하고 있다. 이에 본 연구에서는 모듈러 건축물이 가지고 있는 경제적 부담에 대한 대안으로서 시장의 수요에 따라 이동 가능한 모듈러 건축 방식에 대하여, 기존의 건축 방식과의 생애주기비용 비교를 통해 경제적 효과를 분석하고자 한다. 본 연구에서 분석의 대상으로 삼은 RC 공법과 모듈러 공법의 이동형 모델의 경제성 평가 결과, 단기적인 측면에서는 RC공법이 빠른 수익률을 달성하였지만 건물의 전 생애주기 측면에서는 이동 가능한 모듈러 건축 방식의 경제성이 보다 큰 것으로 나타났다.

• 대한환경공학회지
• /
• 제34권4호
• /
• pp.270-279
• /
• 2012

본 연구에서는 남극 장보고기지 건설 시 발생하는 온실가스 배출량을 자재생산단계와 시공단계로 구분하여 산정하였다. 또한, 시공단계의 배출원은 각각 해양수송과 내륙수송, 건설장비 사용, 건설캠프 운영으로 분류하여 온실가스 배출량을 구체적으로 산정하였다. 전과정평가 개념을 도입해 남극 장보고기지 건설에 투입되는 자재생산을 통해 배출되는 온실가스 배출량은 기지 건설에 따른 전체 온실가스 배출량의 23.8%에 해당하는 8,933 ton (as $CO_{2eq}$)으로 산정되었으며, 향후 남극 신규기지의 건설 시 자재생산을 통한 온실가스 배출이 반드시 고려해야 할 대상인 것으로 판단되었다. 남극 장보고기지 시공단계(총 2단계)에서의 온실가스 배출량은 1단계에 비해서 2단계에 비교적 많이 배출되었으며, 이는 2단계 때 수송화물선이 부산까지 회항하여 정박하므로 연료사용량이 증가하기 때문인 것으로 사료된다. 또한, 시공단계의 온실가스 배출원 가운데 해양수송이 내륙수송, 건설장비 사용 및 건설캠프 운영에 비해 다량의 온실가스를 배출하는 것으로 판명되었다. 남극 장보고기지 건설에 따른 자재생산단계와 시공단계를 통합한 전체 온실가스 배출량은 총 34,486 ton (as $CO_{2eq}$)으로 기존 남극기지 포괄적 환경영향평가(CEE)상에 제시된 온실가스 총배출량과 비교 시 다량의 온실가스가 배출되는 것으로 나타났다. 이는 기존 CEE상에 제시된 온실가스 배출량 산정 시 건설에 투입되는 자재생산을 통해 발생하는 온실가스 배출량 산정이 고려되지 않고, 단순히 자재수송 및 시공단계만을 고려하여 온실가스 배출량을 개략적으로 산정하였기 때문으로 판단된다.

• Architectural research
• /
• 제20권3호
• /
• pp.93-102
• /
• 2018

With the change in Earth's ecosystems due to climate change, a number of studies on zero energy buildings have been conducted globally, due to the depletion of energy and resources. However, most studies have concentrated on residential and office buildings and the performance predictions were made only in the design phase. This study verifies the zero-energy performance in the operational phase by acquiring and analyzing data after the completion of an exhibition building. This building was a retention building, in which a renewable energy system using a passive house building envelope, solar photovoltaic power generation panels, as well as fuel cells were adopted to minimize the maintenance cost for future energy-zero operations. In addition, the energy performance of the building was predicted through prior simulations, and this was compared with actual measured values to evaluate the energy performance of the actual operational records quantitatively. The energy independence rate during the measurement period of the target building was 123% and the carbon reduction due to the energy production on the site was 408.07 tons. The carbon reduction exceeded the carbon emission (331.5 tons), which verified the carbon zero and zero-energy performances.

• 한국건축시공학회지
• /
• 제21권4호
• /
• pp.293-303
• /
• 2021

국내 PC공장은 PC 유공 슬래브를 생산하기 위해 자동화 설비를 도입하거나 매입물 삽입을 통해 중공 단면을 구현하지만 PC공장의 과다한 초기투자비용이 생산원가의 증가라는 주요 원인으로 작용하기에 다른 대안이 필요한 상황이다. 따라서 본 연구에서는 PC 유공 슬래브 부재 생산시 고무 튜브를 내부 속빈 공간을 형성하는 거푸집으로 사용함으로써 다양한 중공 형상의 성형 및 대단면화, 초경량화, 신속생산 대응 가능을 통한 생산성 확보에 기여하고자 한다.

• 한국디지털건축인테리어학회논문집
• /
• 제10권2호
• /
• pp.49-60
• /
• 2010

The production process of construction industry is different from thing of the general manufacturing, likewise various participants make temporary teamwork for success of the project through sharing of information. But the each role of participants is individually changed to step in construction process stage and moreover it has complicated, entangled interests. The Construction Management was inducted for the effective management and operation of construction project. The Key of the Construction Management success depends on the cooperative relationship relation to major participants. The domestic construction system is difficult with many trial and errors for the frequent plan change. As the building are more bigger and complicated, Building Information Modeling is demanded design and maintenance. This evaluation was done by the trust on the system as well as Construction Management. And then it applies the BIM it analyzes the example of construcrion project.

• 한국실내디자인학회논문집
• /
• 제19호
• /
• pp.30-37
• /
• 1999

This study presents a methods on the construction of integrated system for the purpose of automation of design plans, calculation of quantity of materials and estimation by abstracting information on building materials which is produced on the course of three dimension modeling by using computer. Therefore, an object oriented methodology is introduced to compose design informations in three dimension, space for unifying building informations, and expressing properties of building factors and materials, and to construct a database for computers to recognize architecture informations. An object indicates a conceptual individual existing in real world or existence of individual and necessity in composing a building could be called as objects such as column, wall, beam, slab, door and window and these contain materiality and immateriality. It is systemized to which properties of these building's objects are installed by the user of computer and by API(Application Programming Interface), chosen informations automatically converse to each unit work such as design plan structure plan, calculation of amount of materials, etc.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2012년도 춘계 학술논문 발표대회
• /
• pp.151-152
• /
• 2012

Recently, there are growing interests in building LCCO₂ Assessment to reduce carbon emissions. However, existing methods of assessment system include inefficiency in the process of CO₂ calculation requiring considerable data input. Therefore, the purpose of this study is to develop an efficient building assessment system appropriate to material production in construction stage. To that end, quantity input technology was limited to data mapping. Also quantity calculation based on work breakdown structure and item codes consisted of hierarchical structure that is based on facet classification were analyzed. As a result, connectivity links of quantity calculation and CO₂ functional units through item codes for data mapping, and assessment system including calculation and database parts were developed.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2001년도 학술논문발표회
• /
• pp.46-51
• /
• 2001

As a rule, in case of CFT for high-rise building, high strength concrete is required since it should have high fluidity, segregation resistance and large proportion of cement per unit considering the fi11ing beneath the diaphragm. However, regarding the low-rise building under 20 stories, it is somewhat difficult to use high strength concrete. This is a fundamental study to develop a concrete with normal strength and high fluidity for CFT of low-rise building, whose purposes are in speculating several kinds of changes in concrete's characteristics through various experiments and offering basic documents for practicalization in si to and production through mock-up test.