• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2014.05a
• /
• pp.170-171
• /
• 2014

The buildings constructed with steel structure is coated with certified fire resistive material to resist from fire. Coating materials lose their initial performances as time passes, so they need some maintenance. This study is covers standardization of the methods for assessing the durability of SFRM. In Korea, more than 90 percent of SFRM are used indoors. So This study is to decide proper test method through investigation and examination of effect factor to performance of fire-resistant structure and applicable test method.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2014.05a
• /
• pp.124-125
• /
• 2014

Polymer concrete has more excellent durability, tensile strength, flexural strength and waterproof performance mechanically than normal concrete, and as it mixes as a polymer binding material, it can reduce the cement use amount. This study reviews fundamental properties of cement material mixed with complex polymer. As a result of this study, as percentage of complex polymer mix increases, flow value will decrease so that liquidity and compression strength will decrease. On the other hand, in case of flexural strength, when the mixture is 10%, it increases significantly more than OPC.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2008.11a
• /
• pp.79-83
• /
• 2008

With excellent mechanical properties and durability of concrete and construction materials so far because, as has been the most widely used. However, existing in the electrical conductivity of the concrete material is given the characteristics of the concrete can not expand a lot of applications. For example, the cathode material of a parameter, ground resistance materials, electromagnetic shielding materials, sense of self-diagnostic materials, and anti-static materials are available. Currently, research on the electromagnetic shielding and absorbing mortar is incomplete. And Japan, the United States is part of the research in research institutions. Therefore, this research rate in the mouth in a different mix of conductive graphite particle the physical properties of cement mortar about the basic performance characteristics of the robbery was to figure out.

• Journal of KIBIM
• /
• v.2 no.2
• /
• pp.17-26
• /
• 2012

This paper presents the results of a theoretical energy analysis of a research test bed called the Zero Net Energy Test House (ZNETH) in Omaha, Nebraska in U.S.A. The ZNETH project is being designed and built with the goal of consuming a negligible amount of energy by offsetting remaining usage after energy conservation. The theoretically consumed and generated energy levels were analyzed using energy modeling software programs. By integrating a highly graphical and intuitive analysis with a Building Information Model(BIM) of the house, this investigation introduces strategies to include sustainable materials and systems to predict energy generation with a case study of ZNETH. In addition, this paper introduces parametric analyses for better envelope design and construction material selection by analyzing simulated energy consumption with various parametric inputs, e.g., material types, location, and size. It was found that the current design of ZNETH does not meet its goal of zero net energy. Sugeestions are presented to assist ZHETH in meeting its net zero energy goal.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2011.11a
• /
• pp.229-230
• /
• 2011

We could see that, the thinner the retaining wall is, the more advantageous Premixed Agent Type Waterproof method is in the aspect of economic efficiency. The reason is because, in the case of Premixed Agent Type Waterproof method, the thicker the retaining wall is, the higher the construction cost increases due to increase in the material quantity required which increases in proportion to the area in the case of Premixed Agent Type Waterproof method. We could see that, the thinner the retaining wall is, the more inferior the economic efficiency of Infiltration Type Waterproof method is to that of Premixed Agent Type Waterproof method, as, in the case of Infiltration Type Waterproof method, the quantity of material required is fixed in proportion to the area. Consequently, we concluded that Premixed Agent Type Waterproof method is economically advantageous up to the wall thickness of 700 mm and Infiltration Type Waterproof from 800 mm.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2011.11a
• /
• pp.27-28
• /
• 2011

This research aims to secure fundamental data for the development offire-retardant wood by soaking dried wood in fire-retardant liquid. To dry wood, optimal drying conditions for softwood usually used as structural material and hardwood usually used as finishing or furniture material were derived by varying the microwave outputs and heating times of microwave wood drying equipment. The research foundthat each specimen needs 8 to 15 minutes of heating time depending on water content and output. For softwood, fire-retardant liquid equivalent to about 10 percent of the total mass of the specimen infiltrated into the dried wood, of which the water content was reduced to 5~6 percent.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07b
• /
• pp.607-610
• /
• 2003

The characteristic prediction and analysis of 3-dimensional (3-D) solenoid-type embedded inductors is investigated. The four different structures of 3-D inductor are fabricated by using low-temperature cofired ceramic (LTCC) process. The circuit model parameters of the each building block are optimized and extracted using the partial element equivalent circuit method and HSPICE circuit simulator. Based on the model parameters, predictive modeling is applied for the structures composed of the combination of the modeled building blocks. And the characteristics of test structures, such as self-resonant frequency, inductance and Q-factor, are analyzed. This approach can provide the characteristic conception of 3-D solenoid embedded inductors for structural variations.

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.1663-1666
• /
• 2003

TMA clathrate that is used by PCM of ice storage system in this research creates hydrate crystallization at higher temperature than pure water, and application is expected as PCM because having comparative big dormant temperature without phase separation phenomenon. In case this research uses TMA clathrate by PCM, choose admixture by purpose to control or remove subcooling of TMA clathrate and evaluated experimentally. Subcooling is improved and can expect contraction of freezing machine running time and increase of coefficient of performance as that add admixture to TMA clathrate conclusively. Also, may supply thermal storage system that apply low temperature potential heat thermal storage material that subcooling is improved more extensively laying stress on medium size building and small size building, can expect allowance through localization of ice storage system.

• Advances in concrete construction
• /
• v.9 no.2
• /
• pp.125-137
• /
• 2020

As confining materials for concrete, steel and fibre-reinforced polymer (FRP) composites have important applications in both the seismic retrofit of existing reinforced concrete columns and in the new construction of composite structures. We present a comprehensive review of the axial stress-strain behaviour of the FRP-confined concrete column. Next, the mechanical performance of the hybrid FRP-confined concrete-steel composite columns are comprehensively reviewed. Furthermore, the results of FRP-confined concrete column experiments and FRP-confined circular concrete-filled steel tube experiments are presented to study the interaction relationship between various material sections. Finally, the combinations of material sections are discussed. Based on these observations, recommendations regarding future research directions for composite columns are also outlined.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.29 no.3
• /
• pp.128-134
• /
• 2006

The most of national industrial complex were developed and supplied not according to the requirements of enterprise but the needs of the government. And it leads to current serious out of balance in demand and supply of industrial complex. Buckpyoung industrial complex started sale from when the industrial complex developed in 1995 however the unsold percentage of it was 67% until in October,2005. And this result was ranked the top in the unsold percentage among the 42 national industrial complex in korea. In this paper we research how to accelerate the sale of Buckpyoung industrial complex and to reinvigorate local economy and present the constitution of building material cluster and physical distribution system as the results of our research.