• Nuclear Engineering and Technology
• /
• v.56 no.7
• /
• pp.2875-2880
• /
• 2024

The development of nuclear power plants is in three phases. The first phase is a consideration before the decision on the NPP construction program is approved, the second phase is the preparatory work for making contracts and preparing for the construction of NPP after the NPP construction policy is approved, and the third phase is contracting, licensing and building the first NPP. As a volcanically active country, Indonesia contains over 130 active volcanoes that are part of the Pacific Ring of Fire. The volcanic aspect is one of the safety factors considered while deciding the location of an NPP. Research on the potential of natural external risks to the determination of nuclear power plants in Indonesia, including the volcanic aspect, has been conducted based on the safety reference or safety guide of the IAEA and the Nuclear Energy Regulatory Body (BAPETEN) Regulation. Due to technological advancements, safety needs have evolved so the existing Indonesia National Standard (SNI) must be updated to comply with BAPETEN regulations. The substance in SNI 18-2034-1990 relating to volcanic features seems less relevant in actual conditions, given that more complete and exact criteria for determining a site guarantee the safety and health of residents and surrounding the environment site. The study intends to conduct a gap analysis of volcanic issues in SNI and volcanic regulations. The method used is identification requirements for volcanic aspects in SNI 18-2034-1990 about Determining Site of Nuclear Reactor Guidance with BAPETEN Chairman Regulation (BCR) number 4 of 2018 about Nuclear Installation Site Evaluation Safety Provisions and BCR number 5 of 2015 about Evaluation of Nuclear Installation Sites for Volcanic Aspects, and analysis uses a qualitative method of inductive techniques. The outcome of this research applies to suggesting a revision of SNI number 18-2034-1990, especially the volcanic aspect.

• Korean Journal of Construction Engineering and Management
• /
• v.19 no.2
• /
• pp.15-24
• /
• 2018

Despite the recognition of the need for productivity information and its importance, the feedback of productivity information is not well-established in the construction industry. Effective use of productivity information is required to improve the reliability of construction planning. However, in many cases, on-site productivity information is hardly management effectively, but rather it relies on the experience and/or intuition of project participants. Based on the literature review and expert interviews, the authors recognized that one of the possible solutions is to develop a systematic approach in dealing with productivity information of the construction job-sites. It is required that the new system should not be burdensome to users, purpose-oriented information management, easy-to follow information structure, real-time information feedback, and productivity-related factor recognition. Based on the preliminary investigations, this study proposed a framework for a novel system that facilitate the effective management of construction productivity information. This system has utilized Sketchup software which has good user accessibility by minimizing additional data input and related workload. The proposed system has been designed to input, process, and output the pertinent information through a four-stage process: preparation, input, processing, and output. The inputted construction information is classified into Task Breakdown Structure (TBS) and Material Breakdown Structure (MBS), which are constructed by referring to the contents of the standard specification of building construction, and converted into productivity information. In addition, the converted information is also graphically visualized on the screen, allowing the users to use the productivity information from the job-site. The productivity information management system proposed in this study has been pilot-tested in terms of practical applicability and information availability in the real construction project. Very positive results have been obtained from the usability and the applicability of the system and benefits are expected from the validity test of the system. If the proposed system is used in the planning stage in the construction, the productivity information and the continuous information is accumulated, the expected effectiveness of this study would be conceivably further enhanced.

• Journal of Technology Innovation
• /
• v.25 no.2
• /
• pp.153-179
• /
• 2017

Korean government has granted fixed indirect cost rates to several exceptional R&D programs which is lower than the predetermined rate by the government. It has been needed to evaluate the validity of exceptional R&D programs and determine the optimal indirect costs rate of the programs. This study analyzes the cost structure and explores drivers of indirect costs of exceptional R&D programs and evaluates the validity of current indirect costs rates. Finally, we propose the formulas for indirect costs rates of exceptional R&D programs. We analyze the cost structure of the exceptional R&D programs. Equipments and material costs are 50% in infra building program. Scholarship to students is 43% in HRD program. Equipments and material costs are 50% and R&D activity costs are 31% in international R&D program. Main cost components of evaluation program are salary(37%), R&D execution costs(21%) and R&D activity costs(19%). We propose three formulas of indirect costs for exceptional programs. 1) The cost items with exceptionally large amount are excluded in the base of formula for indirect costs. 2) Fixed indirect cost rate is applied for specific R&D programs. 3) Upper bound is set for the cost items with exceptionally large amount in the calculation of indirect costs rate. Our proposal is expected to contribute to the improvement of the efficiency of national R&D programs.

• Economic and Environmental Geology
• /
• v.56 no.1
• /
• pp.103-114
• /
• 2023

The Christian Museum of Gongju Jeil Church was first built in 1931 and was largely damaged during the Korean War, but the walls and chimneys have been preserved. This building has a high architectural values in that the chapel was reconstructed in 1956, and maintains its original form through repair of damaged parts rather than new construction. The stained glass windows were as installed in 1979 and has a great significance in the Dalle de Verre method using lump glass. However, some of the stained glass damaged partially, such as various cracks and splits, and vertical and horizontal cracks in the joint fillers of supporting the colored glass. As the structural materials of the stained glass window, an iron frame and cement mortar filled with it were used, and corrosion of iron, cracking of mortar and granular decomposition appear partially due to weathering. In the joint fillers, the content of Ca and S is very high, indicating that gypsum were used as admixtures, and the gypsums grow in a rhombohedral and forms a bundle, which is investigated to have undergone recrystallization. As a result of modeling the ultrasonic velocity at the joint fillers, the left and right windows at the entrance show relatively weak in the range of 800 to 1,600m/s, and the lower right corner of the altar window and the upper left corner of the center window were also 1,000 to 1,800m/s, showing relatively low physical properties. And gypsums produced during the neutralization of lime mortar were detected in the joint fillers and contaminants on the surface. Such salts may cause damage to the joint material due to freezing and thawing, so appropriate preventive conservation is required. Also, since various damage types are complexly appearing in stained glass window and joint filler, customized conservation treatment should be reviewed through clinical tests.

• Korean Journal of Heritage: History & Science
• /
• v.56 no.4
• /
• pp.40-52
• /
• 2023

The basic purpose of building material called tiles is waterproofing and damp proofing, and they were restricted to use on important buildings to symbolize authority. This is especially true during the Three Kingdoms period, although unearthed examples are rare. Most of these tiles are found in ruins in the Silla and Baekje regions. Tiles were excavated from the Buwon-dong ruins that show the oldest manufacturing technique in the Gaya region to date, and tiles from the early Three Kingdoms period were recently excavated from the Gimhae Bonghwang-dong ruins, which is presumed to be the site of the royal palace of Geumgwan Gaya. These are important materials that show the appearance of tiles from the early days of Gimhae, the ancient capital of Geumgwan Gaya. The tiles excavated from the Bonghwang-dong ruins are reddish-yellow because a small amount of sand was mixed in the tile material and baked at a low temperature. The tiles are thin, no traces of fabric were identified, but traces of clay bands were identified. Tapping tool marks and traces of an anvil used in pottery production are clearly observed on the inside and outside, indicating that the tiles were made in the same way as earthenware manufacturing methods. If this is connected to the genealogy of the potters who made Gaya earthenware, it is estimated that tiles and earthenware were produced together as in the Songrim-ri ruins in Bulo-dong, Incheon, Songgok-dong ruins in Gyeongju, and Mulcheon-ri ruins. To date, tiles excavated from the Gimhae area have been identified only in places believed to be the Geumgwan Gaya City Wall (Royal Palace) in the Gimhae Basin. Considering what has been recorded so far and the geographical scenery, the Bonghwang-dong remains are the only city wall candidate site, and this is clearly revealed through the existence of the excavated tiles, which proves this. Considering that a small number of tiles were excavated during this time, it is estimated that the role of tiles as a luxury product with a symbolic meaning was greater than that of roofing materials, and there were strict restrictions and controls on its use.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.3 no.4
• /
• pp.89-116
• /
• 2008

RFID (Radio Frequency Identification) is regarded as a core technology of ubiquitous computing. Although it has some technical limitations such as technological standardization of RFID tags as well as economical limitations, many companies around the world have already accepted RFID to improve their management efficiency. In this regard, this study is to meet with results that the adoption of RFID technology willbring opportunities that companies' operational process are improved and customer satisfaction is highly strengthened. This research focuses on providing more understanding for building RFID marketing strategy to suppliers who want to sell their RFID products to customers through analyzing purchasing process. The findings are as follows; First, the study shows that buying center members usually take product reliability and precision of technical specification in the case of new-task buying situation while they put their first purchasing priority on prices in the straight rebuy. Second, the finding presents that in new-task buying situation and the straight rebuy purchasing personnel get information about new products through product performance test, organizational engineers, opinions from other companies' purchasing personnel, and checking out samples. Third, this research demonstrates when it comes to purchasing risk in their first purchasing, the persons who are in charge of material purchasing are inclined to be aware of the risk most in technical problems, followed by financial problems and time delay problems in order. And in addition to those risks are mentioned above, once-again-purchasers take the risk like an opportunity loss for better products into consideration. Fourth, the study shows that the role of concerning departments makes no difference in each purchasing stage. Accordingly marketers need to beef up the differentiated strategy to persuade their customers Fifth, the findings of this study demonstrate that purchasing decision making is much influenced by the final users. So suppliers are supposed to perform the most active marketing strategy at the first stage of purchasing through various resources. Finally, the study presents that the suppliers who will have had close relationships with their customers need to give consistent information to them so that their customers can have lower motive in purchasing products from competitors.

• Journal of Radiation Protection and Research
• /
• v.39 no.1
• /
• pp.7-13
• /
• 2014

Phosphate rock, phosphogypsum, and products in phosphate processing facility contain naturally occurring radioactive materials (NORM). Therefore, they may give rise to enhanced radiation dose to workers due to inhalation of airborne particulates. Internal dose due to particle inhalation varies depending on particle properties. The objective of the present study was to characterize particle properties at the largest phosphate processing facility in Korea. A cascade impactor was employed to sample airborne particulates at various processing areas in the plant. The collected samples were used for characterization of particle size distribution, particle concentration in the air, and shape analysis. Aerodynamic diameters of airborne particulates ranged 0.03-100 ${\mu}m$ with the highest concentration at the particle size range of 4.7-5.8 ${\mu}m$ (geometric mean = 5.22 ${\mu}m$) or 5.8-9.0 ${\mu}m$ (geometric mean = 7.22 ${\mu}m$). Particle concentrations in the air varied widely by sampling area up to more than two orders of magnitude. The large variation resulted from the variability of mechanical operations and building ventilations. The airborne particulates appeared as spheroids or rough spherical fragments across all sampling areas and sampled size intervals. Average mass densities of phosphate rocks, phosphogypsums, and fertilizers were 3.1-3.4, 2.1-2.6, and 1.7 $gcm^{-3}$, respectively. Radioactivity concentration of uranium series in phosphate rocks varied with country of origin, ranging 94-866 $Bqkg^{-1}$. Among the uranium series, uranium was mostly concentrated on products, including phosphoric acid or fertilizers whereas radium was concentrated on byproducts or phosphogypsum. No significant radioactivity of $^{226}Ra$ and $^{228}Ra$ were found in fertilizer. However, $^{40}K$ concentration in fertilizer was up to 5,000 Bq $g^{-1}$. The database established in this study can be used for the accurate risk assessment of workers due to inhalation of airborne particles containing NORM. In addition, the findings can be used as a basic data for development of safety standard and guide and for practical radiation safety management at the facility.

• International Journal of Ocean System Engineering
• /
• v.2 no.3
• /
• pp.185-194
• /
• 2012

A Macroscopic combination of two or more distinct materials is commonly referred to as a "Composite Material", having been designed mechanically and chemically superior in function and characteristic than its individual constituent materials. Composite materials are used not only for aerospace and military, but also heavily used in boat/ship building and general composite industries which we are seeing increasingly more. Regardless of the various applications for composite materials, the industry is still limited and requires better fabrication technology and methodology in order to expand and grow. An example of this is that the majority of fabrication facilities nearby still use an antiquated wet lay-up process where fabrication still requires manual hand labor in a 3D environment impeding productivity of composite product design advancement. As an expert in the advanced composites field, I have developed fabrication skills with the use of machinery based on my past composite experience. In autumn 2011, the Korea government confirmed to fund my project. It is the development of a composite sanding machine. I began development of this semi-robotic prototype beginning in 2009. It has possibilities of replacing or augmenting the exhaustive and difficult jobs performed by human hands, such as sanding, grinding, blasting, and polishing in most often, very awkward conditions, and is also will boost productivity, improve surface quality, cut abrasive costs, eliminate vibration injuries, and protect workers from exposure to dust and airborne contamination. Ease of control and operation of the equipment in or outside of the sanding room is a key benefit to end-users. It will prove to be much more economical than normal robotics and minimize errors that commonly occur in factories. The key components and their technologies are a 360 degree rotational shoulder and a wrist that is controlled under PLC controller and joystick manual mode. Development on both of the key modules is complete and are now operational. The Korean government fund boosted my development and I expect to complete full scale development no later than 3rd quarter 2012. Even with the advantages of composite materials, there is still the need to repair or to maintain composite products with a higher level of technology. I have learned many composite repair skills on composite airframe since many composite fabrication skills including repair, requires training for non aerospace applications. The wind energy market is now requiring much larger blades in order to generate more electrical energy for wind farms. One single blade is commonly 50 meters or longer now. When a wind blade becomes damaged from external forces, on-site repair is required on the columns even under strong wind and freezing temperature conditions. In order to correctly obtain polymerization, the repair must be performed on the damaged area within a very limited time. The use of pre-impregnated glass fabric and heating silicone pad and a hot bonder acting precise heating control are surely required.

• 한국벤처창업학회:학술대회논문집
• /
• 2008.11a
• /
• pp.257-282
• /
• 2008

RFID (Radio Frequency Identification) is regarded as a core technology of ubiquitous computing. Although it has some technical limitations such as technological standardization of RFID tags as well as economical limitations, many companies around the world have already accepted RFID to improve their management efficiency. In this regard, this study is to meet with results that the adoption of RFID technology willbring opportunities that companies' operational process are improved and customer satisfaction is highly strengthened. This research focuses on providing more understanding for building RFID marketing strategy to suppliers who want to sell their RFID products to customers through analyzing purchasing process. The findings are as follows; First, the study shows that buying center members usually take product reliability and precision of technical specification in the case of new-task buying situation while they put their first purchasing priority on prices in the straight rebuy. Second, the finding presents that in new-task buying situation and the straight rebuy purchasing personnel get information about new products through product performance test, organizational engineers, opinions from other companies' purchasing personnel, and checking out samples. Third, this research demonstrates when it comes to purchasing risk in their first purchasing, the persons who are in charge of material purchasing are inclined to be aware of the risk most in technical problems, followed by financial problems and time delay problems in order. And in addition to those risks are mentioned above, once-again-purchasers take the risk like an opportunity loss for better products into consideration. Fourth, the study shows that the role of concerning departments makes no difference in each purchasing stage. Accordingly marketers need to beef up the differentiated strategy to persuade their customers. Fifth, the findings of this study demonstrate that purchasing decision making is much influenced by the final users. So suppliers are supposed to perform the most active marketing strategy at the first stage of purchasing through various resources. Finally, the study presents that the suppliers who will have had close relationships with their customers need to give consistent information to them so that their customers can have lower motive in purchasing products from competitors.

• Korean Journal of Environmental Biology
• /
• v.36 no.1
• /
• pp.33-42
• /
• 2018

The tropical peatlands have been deforested and converted to agricultural and plantation areas in Indonesia. To manage water levels and increase the overall productivity of crops, canals have been constructed in tropical peatlands. The canals destructed the structure of the tropical peatlands, and increased the subsidence and fire hazard risks in the region. The Indonesian government enacted regulations and a moratorium on tropical peatlands, in order to reduce degradation. A practical method under the regulations of rewetting tropical peatlands was to permit a canal blocking. In this study, four canal blocking projects were investigated regarding their planning, construction priority, design, building material, construction, monitoring, time and costs associated with the canal blockings. In the protected areas, regulations restricted the development of the tropical peatlands areas that were noted as deeper than 3 m, and the administration stopped issuing new concessions for future work projects for this noted criteria of land use. A noted purpose of canal blockings in these areas was to effectuate the restoration of the lands in the region. The main considerations of the restoration efforts were to maintain a durability of the blockings, and to encourage the participation of the area stakeholders. In the case of a concession area, regulations were set into place to restrict clear-cutting and shifting cultivation, and to maintain groundwater level in the tropical peatland. The most significant priorities identified in the canal blocking project were the efficiency and cost-effectiveness of the project. Nevertheless, the drainage of tropical peatlands has been continued. On the basis of a literature review on regulations and rewetting methods in tropical peatlands of Indonesia, we discussed the improvements of the regulations, and adequate canal blockings to serve the function to rewet the tropical peatlands in Indonesia. Our results would help establishing an adequate direction and recommended guideline on viable rewetting methods for the restoration of drained tropical peatlands in Southeast Asia.