• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2011년도 추계 학술논문 발표대회
• /
• pp.21-22
• /
• 2011

Recently, the development of alternative energy technologies has been actively conducted for energy conservation and CO₂ emission reduction. Especially, photovoltaic energy has been applied practically in construction industry, and research on the building-integrated photovoltaic system (BIPV) that can replace fossil fuel for building operation and maintenance has been performed. However, this vibrant research has been limited to the use phase of buildings, and few studies have been carried out in the construction phase. The construction duration and the scale of the sites have increased along with the high-rise trend of buildings, and it is forecasted that the temporary electricity use and CO₂ emission in the construction phase is increasing. In sight of these developments, this research analyzed applicability of the photovoltaic system for the construction phase that can replace the electricity used on the high-rise construction site.

• 한국산학기술학회논문지
• /
• 제15권12호
• /
• pp.7340-7349
• /
• 2014

Building Information Model(BIM)과 Geographic Information Systems(GIS)는 각각 건설 분야의 전 생애주기(기획-설계-시공-유지관리) 단계에 걸쳐 다양하게 활용되어 왔다. 최근, BIM과 GIS의 통합을 통해 시너지 효과를 발휘하기 위한 BIM/GIS 통합플랫폼의 설계에 대한 연구가 수행되고 있다. 본 논문에서는 건설기획 및 설계 단계에 BIM/GIS 플랫폼을 활용하기 위한 시나리오 및 상세 기능을 정의한다. 첫째, 업무를 분석하여 BIM/GIS 플랫폼을 활용하기 위한 단계 별 시나리오를 도출하고 해당 시나리오를 구현하기 위한 플랫폼 기능을 도출한다. 둘째, 각 플랫폼 기능을 구성하는 SW 기능을 정의한다. 건설기획 단계에서는 입지선정 및 노선선정 업무를 대상으로 하였으며, 건설 설계 단계에서는 기본설계와 실시설계 업무를 대상으로 하였다. 본 연구의 결과는 향후 BIM/GIS 통합플랫폼 설계에 활용될 수 있을 것이다.

• 국제초고층학회논문집
• /
• 제7권3호
• /
• pp.233-242
• /
• 2018

Since the response reduction effect on over 200-meter-tall resulting from the seismic isolation system is smaller in general than low-rise and mid-rise buildings, mid-story isolated buildings are considered to reduce the response in the upper part above the isolation story, however, in many cases, the acceleration response just below the isolation story is likely to be the largest. This paper presents the structural design schemes, the design of the main structural frames, and the constructions of a 230-meter-tall super high-rise building with mid-story isolation mechanism integrated in Roppongi, Tokyo. Moreover, this paper shows how the architectural and structural design for integrating a mid-story isolation system in a super high-rise building has been conducted and what solutions have been derived in this project. The realization of this building indicates new possibilities for mid-story isolation design for super high-rise buildings.

• 한국CDE학회논문집
• /
• 제21권2호
• /
• pp.130-142
• /
• 2016

BIM library, as a systematic collection of BIM objects where the building information is stored, is a vital factor to construct the BIM based work environment. However, construction business is faced the problems relating BIM library such as the absence of the standard for establishing BIM library, the discontinuity of BIM library's compatibility and the lack of practice applicable BIM library. These problems cause the decreasing work efficiency and the recreating BIM model, by delivering inefficient information required in each stage and application field. The purpose of this study is to suggest the integrated management system for property information of BIM library in order to minimize the reworking and to manage information of each stage and application field when exchanging and sharing information. To achieve this, the BIM information classification, the criteria of property requirements for information exchange in BIM application field and the BIM library management system are developed. This study could contributes to ensuring the reliability and accuracy of results of BIM based analysis and to enhancing the speed of business process with sharing and exchanging building information utilizing a single BIM model.

• 한국태양에너지학회 논문집
• /
• 제27권2호
• /
• pp.61-69
• /
• 2007

The final energy consumption in the building sector in Korea represents almost 20% of the total energy consumption. Besides, Space heating and hot water generation in Korea are based on fossil fuels, with a serious environmental impact. Despite the popularity of simple solar domestic hot water systems, active solar space heating remains, for various reasons, marginal. And thus, the aim of this paper is to demonstrate potentialities of solar assisted space heating systems, both technically and economically. From this study found that the solar heating system with CPC solar collectors integrated the roof of a single-story residential building shares $50{\sim}55%$ of the annual heating load.

• 유통과학연구
• /
• 제5권2호
• /
• pp.79-100
• /
• 2007

본 연구는 RFID를 이용한 창고관리시스템(Warehouse Management System; WMS), 통합주문관리시스템(Customer Service & Support System; CSS), 국제물류시스템(Delivery Management System)을 성공적으로 구축한 CJ GLS주식회사의 사례를 통한 구축효과에 대한 연구이다. 이를 위해 먼저 산업자원부 등에서 정책적으로 육성되고 있는 RFID, 즉 차세대 유비쿼터스 네트워크 사회의 핵심기술로 기대되고 있는 RFID의 개요 및 특징, 활용분야, 기술 및 실용화 동향 등에 관해 국내 및 외국의 사례를 소개하였다. 다음으로 효율적인 통합물류시스템 구축을 위해 RFID를 이용한 CJ GLS의 시스템 도입배경 및 목표, 시스템 구축의 개요 및, 구축효과를 분석하고, 결론으로 RFID의 향후전망 및 SCM 발전 방향을 제시하였다.

• 한국전자통신학회논문지
• /
• 제19권3호
• /
• pp.515-522
• /
• 2024

전 세계적으로 전력 소비량이 꾸준히 증가하고 있으며, 특히 빌딩의 전력 소비 비율은 세계 전력 소비 비율의 20% 이상을 차지할 만큼 그 비중이 크다. 이에 따라 빌딩에서의 전력 소비를 효율적으로 관리하는 빌딩 에너지 관리 시스템(BEMS, Building Energy Management System)의 연구 및 개발이 활발히 진행되고 있으며, 특히 최근에는 인공지능 기술의 발달로 인해 Smart BEMS 연구가 주목받고 있다. 본 논문에서는 강화학습 기반 V2G(Vehicle-to-Grid) Station 연계형 스마트 에너지 빌딩 전력 제어 기법을 제안한다. 실제 빌딩의 전력량 데이터 기반 성능평가 결과, 학습이 진행됨에 따라 빌딩에서의 전력 요금이 감축하는 것을 확인하였다.

• 한국BIM학회 논문집
• /
• 제8권2호
• /
• pp.10-18
• /
• 2018

BIM technologies store, share and integrate the information produced in each sector of the construction industry. From this point on, it increases the efficiency of the work. Currently, quantity take-off and process schedule are derived separately based on BIM technology. When calculating the quantity by process, relevant information shall be collected, reinterpreted, and reevaluated as required by the practice. The purpose of this study is to develop an integrated process and quantity management system through BIM collaboration and to build prototypes for steel structures. The main research is to build a construction BIM model for steel structures and a process BIM model through BIM collaboration. Furthermore, necessary information was selected and processed according to the user's needs for integrated management. Relevant integration outcomes are visualized graphically to maximize utilization. Through these studies, a system for integrated control of processes and supplies is provided, and the results are expected to contribute to the improvement of working efficiency and are easily and quickly reflected in design change and process change. In this study, we intended to enhance the usability of information by linking process schedules with quantity calculations based on BIM. Thus, the process for integrated control of the quantity of structural components by process unit and the BIM based schedule information was established. In addition, the efficiency of the information link of the integrated management system was considered for design changes and process schedule changes.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2008년도 춘계학술발표대회 논문집
• /
• pp.300-303
• /
• 2008

The stratification effect was investigated with four different types of diffuser shape in a thermal storage tank. For this study, experimental facility was constructed, which was composed of experimental thermal storage tank, hot and cold water storage tanks, boiler, chiller, data acquisition system, etc.. Visualization and lab scale experimental result showed that radial curved type diffuser was the highest degree of stratification among the four diffuser shapes.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 춘계학술대회
• /
• pp.280-283
• /
• 2007

The first grid-connected, building-integrated transparent amorphous silicon photovoltaic installation has been operated since October 2004 in Yongin, Korea. The 2.2kWp transparent PV system was applied to the facade of entrance hall in newly constructed KOLON E&C R&D building. The PV module is a nominal 0.98m ${\times}$ 0.95m, 10% transparent, laminated, amorphous(a-Si) thin-film device rated at 44 Wp per module. To demonstrate the architectural features of thin film PV technologies for daylighting application, transparent PV modules are attached to the building envelope with the form of single glazed window and special point glazing(SPG) frames. Besides power generation, the 10% transmittance of a-Si PV module provides very smooth natural daylight to the entrance hall without any special shading devices for whole year. The installation is fully instrumented and is continuously monitored in order to allow the performance assessment of amorphous silicon PV operating at the prevailing conditions. This paper presents measured power performance data from the first 12 months of operation. For the first year, annual average system specific yield was just 486.4kWh/kWp/year which is almost half of typical amorphous silicon PV output under the best angle and orientation. It should be caused by building orientation and self-shading of adjacent mass. Besides annual power output, various statistical analysis was performed to identify the characteristics of transparent thin film PV system.