• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.35 no.5
• /
• pp.431-438
• /
• 2017

The information management system for urban planning, urban management and related decision making is increasing an importance in recent years. Especially, the information about 3D buildings in urban area is necessary for urban management related precise location based service. However, it takes a lot of time, effort, and costs to produce 3D modeling data of buildings. These problems have been found in many studies, but the research to solve these problems is still necessary. In this study, we have tested an efficient 3D modeling method of building to solve these problems. SketchUp was used to test 3D modeling methods with OSM(OpenStreetMap) data. The other 3D modeling method using a digital map was tested. The 3D modeling of building data was efficient using PlaceMaker, which can use OSM data. In addition, modeling was possible through simple editing of the digital map and automatic building generation. The efficiency of the research results is presented by comparing with the traditional method based on the regulation and the stadard man power issued by Korean government. These two 3D modeling methods of building tested through the study can be used as basic data for related research and work. Additional studies should be conducted to improve the accuracy of the building model and determine how to obtain height data efficiently.

• KIEAE Journal
• /
• v.4 no.4
• /
• pp.35-44
• /
• 2004

In Korea, the apartment buildings have been constructed recently in large quantities to provide housing due to the gravitation of population towards large cities. However, because of this trend toward high-rise apartment, a number of problems are occurred such as the deterioration of comfort in the dwelling environment and the lack of solar access right in apartment buildings. In the building law, the sunshine hour and the minimal separated distance between apartment buildings as regulated as the criteria for the site planning. Most of site planners, however, designed the apartment site only following minimum separated distance. As a result, the problem of sunshine hours lack is caused and legal dispute concerning solar access right is also arisen. The purpose of this study is to improve solar access right regulation and to help site design of apartment planning. Accordingly, we execute empirical analysis based on computer simulation in order to find suitable separated distance between typically designed apartment buildings. First, we estimated sunshine hours according to independent building orientation, height, and length. Second, we calculated sunshine hours in various case of apartment arrangement; parallel type, courtyard type, tower type and etc. with various separated distance.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.29 no.4
• /
• pp.166-172
• /
• 2021

Obstacle Limitation Surfaces (OLS) are set to protect a certain amount of airspace to limit objects, such as building, other structures, penetrating OLS for safety and regularity of aircraft operations in the vicinity of aerodromes. However, many civil petitions have been raising for effective utilization of lands and permission of building construction which penetrating OLS. While Republic of Korea are limiting installation of penetrating objects based on the National law of airport facilities, such objects are possibly permitted, only if, the possible risks coming from objects are acceptable or negligible in terms of safety and regularity in aircraft operations through the evaluation process, called as an aeronautical study. However, many countries are currently applying their own criteria, processes resulting in failing secure reliable results in aeronautical study. This research aims to establish the framework on criteria, process, and methodologies how the aeronautical study works including work flows between many stakeholder and responsibilities to be specified in national regulation system.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.38 no.2
• /
• pp.131-140
• /
• 2020

Recently the importance of BIM (Building Information Modeling) that enables 3D location-based design and construction work is being highlighted around the world. In Korea, the road map has been established to settle the design based on BIM using drone survey results by 2025. As the first step, BIM would be applied to road construction projects worth more than 50 billion Korean Won from 2020. On the other hand, drone survey regulation has been enacted and the data for drone survey cost were also included on Standard of construction estimate in 2020. However, more careful improvement is required to reflect drone survey results in BIM design and construction. Currently, Engineering instructions and Standard of construction estimate specifies that earthwork volume must be calculated by cross section method only. So it is required to add the method of DEM (Digital Elevation Model) based volume calculation on these regulations to realize BIM application. In order for that, this study verified the method of DEM based earthwork volume calculation. To get an accurate DEM for accurate volume computation, drone survey was carried out according to the drone survey regulation and then could get an accurate DEM data which have errors less than 3cm in X, Y and 6.8cm in H. As each DEM cell has 3D coordinate component, the volume of each cell can be calculated by obtaining the height of area of the cell then total volume is calculated by multiplying total number of cells by volume of each cell for the construction area. Verification for the new calculation method compare with existing method was carried out. The difference between DEM based volume by drone survey and cross section based volume by traditional survey was less than 1.33% and it can be seen that new DEM method will be able to be applied to BIM design and construction instead of cross section method.

• Explosives and Blasting
• /
• v.32 no.2
• /
• pp.25-30
• /
• 2014

Although the construction noise and vibration are transient and intermittent, their impact on the surrounding environment is huge. Since the construction equipment noise and vibration is usually transmitted because of the long distance, the sound insulation and the proper design of anti-vibration measures are very difficult. The regulation requires that the noise and vibration caused by the construction equipments should be measured within 30m from the source, whereas the blasting noise and vibration should be measured at least 60m and 160m away from the source, respectively. Instead of the 2D modelling mainly conducted so far, the 3D analysis of noise and vibration with the consideration of the height and size of the building, mountains and hills in the vicinity of the source is necessary.

• Journal of the Regional Association of Architectural Institute of Korea
• /
• v.20 no.6
• /
• pp.89-96
• /
• 2018

The purpose of this study is to categorize Commercial area by identifying characteristics of blocks and coding them in order to segment use zoning in Commercial area. The study was conducted as follows. Data from building register, cadastral map, statistics annual report are utilized to identify the physical environment of the block. four types used as code under the physical environment classification code which are classification code of physical environment, detail usage, volume ratio, and height type are set, and combine the classification codes sorted by the four types of code. Through the physical environment classification codes, there are currently 37 different block characteristics of the Old downtown Commercial area. Diversity is not reflected. There are only Central commercial area of regulations in Old downtown commercial areas that are uniformly managed. For the renewal, management and development that can occur in the near future, it is necessary to segment of use district in the commercial area. Consider the current situation and future development direction for the management of sustainable commercial areas. Management is required using physical environment classification codes. It is meaningful that it can be maintained, managed and developed in accordance with the characteristics of each block.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.15 no.2
• /
• pp.137-147
• /
• 2012

GRS is an effective urban ecology restoration technique that can manage a variety of environmental functions such as ecological restoration, rainwater spill control and island heat effect from a low-impact development standpoint that can be utilized in new construction and retrofits. Recently, quantitative evaluation studies, both domestic and abroad, in the areas related to these functions, including near-earth surface climate phenomenon, heavy rainwater regulation, thermal environment of buildings, have been actively underway, and there is a trend to standardize in the form of technological standards. In particular, centered on the advanced European countries, studies of standardizing the specific insulation capability of buildings with green system that comprehensively includes the green roof, from the perspective of replacing the exterior materials of existing buildings, are in progress. The limitation of related studies in the difficulties associated with deriving results that reflect material characteristics of continuously evolving systems due in part to not having sufficiently considered the main components of green system, mechanisms of vegetation, soils. This study attempts to derive, through EnergyPlus, the effects that the vegetation-related indicators such as vegetation height, FCV, etc. have on building energy load, by interpreting vegetation and soil mechanisms through plant canopy model and using an ecological standard indicator LAI that represent the condition of plant growth. Through this, the interpretations that assume green roof system as simple heat insulation will be complemented and a more practical building energy performance evaluation method that reflects numerical methods for heat fluxes phenomena that occur between ecology restoration systems comprised of plants and soil and the ambient space.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.37 no.6
• /
• pp.48-56
• /
• 2010

Since ancient times, Korea has been called a land of beauty. Scenic sites under the Cultural Properties Protection Act include picturesque places that are famous for their natural scenic beauty as well as their historical and cultural value. Scenic sites are managed as natural assets to promote their preservation and use. However, the management of scenic sites can produce adverse effects on regional development and ownership rights. Moreover, the purpose of their designation as cultural assets is not fully understood because scenic sites are managed by focusing on restraint on users' act the same as was applied to historic sites. Therefore, the purpose of this study is to protect inhabitants' rights of ownership by arranging the boundaries of designated areas and by providing standard permission for condition changes in the Buryeongsa Valley, which was designated as a Scenic Site in 1979. The results of this study can be summarized as follows: First, arranging the boundaries of the designated area includes the arrangement of the edge lines standardized on the visual range of the mountain ridge, preventing the loss of landscape beauty in the designated district; the internal clearing district focuses on the existing settlement. Gearing the designated areas after the arrangement of the boundaries results in $11,928,932m^2$, 38.6% compared to the existing designated areas. Second, it establishes a 500m buffer zone inside the radius of the boundary of the cultural asset as a standard for condition changes that seriously affect landscape preservation. Third, the standards for permission on building 'height regulations' are divided into flat and gable, according to the roof shape. The adopted standard is 8m high for 2 story flat roofs, and 12m high for 2 story gable roofs.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.29 no.2
• /
• pp.108-117
• /
• 2011

In drafting the standards on changes in current conditions, the height or the number of stories is applied in a restrictive manner by limiting to securing the distance to vertical surface for cultural properties within the influence investigation area, but this is expected to have a negative impact on the surrounding sceneries as well as results in the dwarfing phenomenon for precious cultural properties. That is, the preparation for supplementing the insufficient objectivity that is likely to take place during the process of drafting the standards on changes in current conditions. Thus the author attempts to suggest the analytic method for the decision making related to objective and reasonable determination and regulation of the changes in current conditions through computer based simulation work that considers the cultural properties and surrounding environments under investigation. In order to achieve such research objectives, the author reviewed the subject sites where the cultural property dwarfing phenomenon was expected to occur in case of the permission for the changes in current conditions or where the impact of natural landscape and natural feature on the earth is less than architectural building or artificial structure or where the new policy program is likely to be adopted due to incomplete establishment of current condition change standard within influence investigation area, among other cultural properties with architectural building or artificial structure nearby located in Cheonan city and then selected Cheonansaji Dangganjiju(flag poles) and Jiksanhyun Gwana(government office). The author then undertook the quantitative visibility analysis in order to determine the comprehensive prospect rights for the cultural properties and surrounding environments concerned.

• Proceedings of the SAREK Conference
• /
• 2008.11a
• /
• pp.469-474
• /
• 2008

The objective of this study is to propose basic design guidelines for more effective air ventilation system in apartments. It is well known that ventilation depends on whether the room doors are open or closed as well as people's living patterns. This study considers 84 ㎡-sized apartment which has extended living room without balcony. Ventilation of bathroom and kitchen is not considered. The height of the building, external air pressure and air infiltration through the windows are also neglected. The regulation on indoor air quality made it mandatory that the air change per hour be more than 0.7. Four models are suggested to study the effect of open and closed doors. Models 1 and 3 are open door types and models 2 and 4 are closed door types. The open types have 50 mm hole near the top of the door to substitute exhaust outlet. The ventilation effectiveness was evaluated by 3-dimensional numerical simulation using finite volume method by a commercial software. This work compares air flow, temperature of air, age of air and the efficiency of ventilation of apartments with wooden doors of bedroom 1 and 2, which are open or closed.