• 대한공간정보학회지
• /
• 제13권2호
• /
• pp.65-69
• /
• 2005

GIS 분야에서 도심 건물 지역의 3차원 자료 생성에 대한 관심이 대두되면서 효율적인 3차원 자료 구축에 대한 연구가 활발히 진행되고 있다. 3차원 자료 생성과 관련된 연구는 대부분 항공사진, 위성영상, LIDAR자료를 이용한 건물 추출 및 건물 고도 복윈 기법 개발에 초점을 두고 있다. 항공사진 및 위성영상의 단일 자료를 이용한 건물 고도의 추출이나 복원은 광학 영상의 기하학적 왜곡으로 많은 어려움이 있다. 건물의 고도를 추출하기 위해서는 일반적으로 입체 영상을 이용하는데, 광학 영상의 기복 변위로 인해 영상정합 시 오정합이 발생할 수 있어 부정확한 결과를 초래할 수 있다. 건물의 고도 추출을 위해서 국내 외적으로 단일 자료만을 이용하지 않고 2차원 GIS 자료(예, 수치지형도)와 같은 기 구축된 자료를 함께 활용하는 기법 개발이 진행되고 있다. 본 연구에서는 항공사진(1/5,000)과 기 구축되어 활용되고 있는 수치지형도(1/1,000)를 이용한 건물 고도 추출 기법 개발에 관한 연구를 수행하였다. 영상정합 대상점을 제한하기 위해 건물 영상에서 관심점을 추출하여 이용하였으며, 본 연구 성과의 정확도를 검증하기 위해 수치도화 장비를 이용한 건물 고도 모형 성과와 비교 평가하였다.

• Nuclear Engineering and Technology
• /
• 제53권5호
• /
• pp.1686-1704
• /
• 2021

This study addresses the numerical simulation of the shield building of an AP1000 nuclear power plant (NPP) subjected to a large commercial aircraft impact. First, a simplified finite element model (F.E. model) of the large commercial Boeing 737 MAX 8 aircraft is established. The F.E. model of the AP1000 shield building is constructed, which is a reasonably simplified reinforced concrete structure. The effectiveness of both F.E. models is verified by the classical Riera method and the impact test of a 1/7.5 scaled GE-J79 engine model. Then, based on the verified F.E. models, the entire impact process of the aircraft on the shield building is simulated by the missile-target interaction method (coupled method) and by the ANSYS/LS-DYNA software, which is at different initial impact velocities and impact heights. Finally, the laws and characteristics of the aircraft impact force, residual velocity, kinetic energy, concrete damage, axial reinforcement stress, and perforated size are analyzed in detail. The results show that all of them increase with the addition to the initial impact velocity. The first four are not very sensitive to the impact height. The engine impact mainly contributes to the peak impact force, and the peak impact force is six times higher than that in the first stage. With increasing initial impact velocity, the maximum aircraft impact force rises linearly. The range of the tension and pressure of the reinforcement axial stress changes with the impact height. The perforated size increases with increasing impact height. The radial perforation area is almost insensitive to the initial impact velocity and impact height. The research of this study can provide help for engineers in designing AP1000 shield buildings.

• Wind and Structures
• /
• 제37권6호
• /
• pp.425-444
• /
• 2023

This study is to investigate the effect of interference between two C-shaped high-rise buildings by computational fluid dynamics (CFD), focusing on the variation of the local pressure coefficient (C_P) and the mean pressure coefficient (C_PMEAN). Sixteen building position cases are considered for the present study. These cases were based on the position and height of the interference building (IB). The pressure coefficient (C_P) is calculated on the principal building (PB) and is compared with an isolated building identical in shape and size. The interference effect on PB has also been presented in reference for the interference factor (IF). According to the findings, the maximum force coefficient on the PB is 0.971 and it is 10.97% more than the isolated PB when IB is located at position 2b (two times the width of the building), and the interfering height of 13H/15 mm. The moment coefficient on PB is 1.27, which is 27.36% less than the isolated case in which IB pushed 2b to 3b in the y direction with 750 mm height. In most of the cases, because of the shielding effect of the IB, the value of force coefficient (C_F) on PB has been reduced. On the face of the PB, there are also considerable differences in the mean pressure coefficient C_PMEAN. When IB was positioned at a location of 2b in Y direction and an interfering height of 13H/15 mm, the maximum C_PMEAN (1.58) was observed on the leeward face of PB.

• Wind and Structures
• /
• 제15권4호
• /
• pp.313-329
• /
• 2012

There have existed for a number of years good practice guidelines for the use of Computational Fluid Dynamics (CFD) in the field of wind engineering. As part of those guidelines, details are given for the size of flow domain that should be used around a building of height, H. For low-rise buildings, the domain sizes produced by following the guidelines are reasonable and produce results that are largely free from blockage effects. However, when high-rise or tall buildings are considered, the domain size based solely on the building height produces very large domains. A large domain, in most cases, leads to a large cell count, with many of the cells in the grid being used up in regions far from the building/wake region. This paper challenges this domain size guidance by looking at the effects of changing the domain size around a tall building. The RNG ${\kappa}-{\varepsilon}$ turbulence model is used in a series of steady-state solutions where the only parameter varied is the domain size, with the mesh resolution in the building/wake region left unchanged. Comparisons between the velocity fields in the near-field of the building and pressure coefficients on the building are used to inform the assessment. The findings of the work for this case suggest that a domain of approximately 10% the volume of that suggested by the existing guidelines could be used with a loss in accuracy of less than 10%.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2008년도 춘계학술발표대회 논문집
• /
• pp.148-153
• /
• 2008

An inflow of daylight to the room offers comfortable view environment, psychological and physical security to people in the room and there are merits such as a work efficiency and energy saving. But, it has many problems as an excessive direct sunlight, cooling and heating. We can expect to have energy saving effect for illumination with comfortable view environment creation through control on height of roller shade. This study will be a used a fundamental approach to control on height of roller shade to changing daylight.

• Structural Monitoring and Maintenance
• /
• 제4권4호
• /
• pp.351-364
• /
• 2017

In this study effects of various parameters like a number of bays, the stiffness of the structure along with the height of the structure was examined. The fundamental period of vibration T of the building is an important parameter for evaluation of seismic base shear. Empirical equations which are given in the Indian seismic code for the calculation of the fundamental period of a framed structure, primarily as a function of height, and do not consider the effect of number of bays and stiffness of the structure. Building periods predicted by these expressions are widely used in practice, although it has been observed that there is scope for further improvement in these equations since the height alone is inadequate to explain the period variability. The aim of this study is to find the effects of a number of bays in both the directions, the stiffness of the structure and propose a new period equation which incorporates a number of bays, plan area, stiffness along with the height of the structure.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2017년도 춘계 학술논문 발표대회
• /
• pp.56-57
• /
• 2017

In recent years, new construction methods have been required to reduce the construction cost and increase the available area in an environment where construction work is frequently performed in a narrow urban area like Korea. As a result of these studies, slim floor composite beam has been suggested. Slim floor composite beam can reduce required depth because web of steel beam is embedded in the slab, so it is effective to reduce floor height and increase the available area. The purpose of this study is the floor height reduction evaluation by comparing system consisting of reinforced concrete, steel, and slim floor using square-shape steel pipe. After doing structural design for a typical plan, checked effectiveness by comparing each design plan. It is proven that slim floor composite beam can reduce required depth effectively comparing required materials of other system.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2018년도 춘계 학술논문 발표대회
• /
• pp.283-284
• /
• 2018

The rear side surface of tiles act have protrusions that helps secure the adhesion between the tile and the mortar for tile setting. Conventional height of the rear side usually ranges between 1 to 1.5 mm, and the molding method is classified in between press type and compression type during the manufacturing process, with most tiles being produced by the former method. In sites where adhesion failures were observed, tiles were taken to examine the cause of defect. It was determined that height was irregular at the rear side surface. Based on these findings, an experiment was conducted to determine the correlation between the rear surface and the bonding strength of tiles.

• 한국지리정보학회지
• /
• 제12권3호
• /
• pp.35-44
• /
• 2009

본 연구에서는 GIS기반의 공간분석과 시뮬레이션기법을 활용하여 산림스카이라인 및 자연경관 훼손을 사전에 검증할 수 있는 친환경적 건축물 높이 예측 프로그램을 개발하고 현지적정성을 검토하였다. 건축물의 높이 예측과 같은 경관평가에 조망점의 위치 등의 선정방법이 큰 영향을 미치는 요인이므로 GIS의 지형분석과 가시권분석을 이용하여 자동조망점을 선정하고, 기존의 조망점 선정방법과의 차이를 통계적으로 검증하였다. One-way ANOVA를 이용하여 분석한 결과 모든 사례지역에서 조망점 선정방법에 따른 평균값의 차이가 없는 것으로 평가되었다. 이에 따라 자동조망점 선정방법으로 프로그램을 개발하고, 필요에 따라 추가 조망점을 선정할 수 있도록 설계하였다. 개발된 프로그램을 이용하여 5개 사례지역에 시뮬레이션을 적용한 결과, 산림경관 및 주변 환경과 조화로운 것으로 나타났다. 다만, 등고선을 기준으로 건축물 높이를 예측하였기 때문에 건축물 값이 다소 낮게 나온 경향이 있으므로 향후연구에서는 나무의 높이와 같은 산림요소에 대한 고려가 필요하다.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2009년도 춘계학술발표대회 논문집
• /
• pp.180-183
• /
• 2009

In this study, Urban Climate Simulation was performed by 3-Dimensional Urban Canopy Model. The characteristics of urban climate was analyzed combining artificial land coverage, building size, heat production from the air conditioning and topographic conditions as physical variables which affects urban climate characteristics. The results are as follows. (1)The aspects of the urban climatal change is derived to be related to the combination of the building coverage ratio, building height and shading area. (2)Whole heat generation was influenced by the convective sensible heat at the lower building height and by the artificial heat generation at the higher one over 20-story building influence to some extent of the building coverage ratio. The effect of the altitude is not more considerable than the other variables as below $1^{\circ}C$ of the air temperature.