• Title/Summary/Keyword: Building Exterior

Search Result 576, Processing Time 0.029 seconds

Performance Evaluation of Energy Reduction of Light Shelf Applying Punching Plate

  • Choi, Yuchang;Lee, Heangwoo;Seo, Janghoo;Kim, Yongseong
    • KIEAE Journal
    • /
    • v.14 no.6
    • /
    • pp.5-13
    • /
    • 2014
  • Various studies on lighting energy savings are conducted, given that lighting energy consumption accounts 23.5% of building energy consumption. Especially, external type light shelf's efficiency is acknowledged; however, its application is limited in Korea, where high rise building ratio is high, due to high wind pressure. This study delves into natural lighting system to cope with wind pressure, and proposes the punching plate-installed light shelf. This study actually draws lighting energy output, according to whether the punching plate is applied through the test-bed, and verifies the effectiveness of the punching plate-installed light shelf. The conclusion is presented below: First) The result of performance evaluation of light shelf with the punching plate in winter solstice showed that the awning area decreased as the opening ratio increased so that the indoor distributed illumination tended to increase, and $-40^{\circ}$ which was advantageous for awning was determined as the proper angle. Second) The light shelf with the punching plate in spring/autumn equinox shows improved lighting according to the angle, and the appropriate angle of light shelf with the punching plate has increased to $15^{\circ}$ and $20^{\circ}$ according to the opening ratio in comparison to $5^{\circ}C$ which is the appropriate angle of light shelf with no punching plate due to the reflection area reduced by the reflecting plate with holes. Third) The result of performance evaluation of light shelf with the punching plate in summer solstice showed that the lighting performance tended to decrease as the opening ratio increased. 4) The light shelf with the punching plate incurs a 50% energy loss in comparison to the light shelf with no punching plate. However, its effectiveness has been proven in the aspects that it can bring a 50% energy saving in comparison to the case with no installation of light shelf and that it can be designed in response to wind pressure on the high floors.

An Experimental Study on Durability of Mortar and Concrete using Shrinkage reducing typed Superplasticizer (수축저감형 혼화제를 이용한 모르타르 및 콘크리트의 물리적 특성에 관한 기초적 연구)

  • Woo, Hyung-Min;Park, Hee-Gon;Lee, Young-Do
    • Journal of the Korea Institute of Building Construction
    • /
    • v.16 no.6
    • /
    • pp.561-569
    • /
    • 2016
  • Concrete is cheap, easy to deal with, and the quality is satisfactory. Also, it is one of the easiest materials to get because chemical composition of cement is similar to chemical composition of surface. On the other hand, it is so vulnerable to transform because of weak binding capacity and low binding energy that it produces cracks. Cracks decline durability, usability, safety of structures and damage exterior. In order to decline drying shrinkage crack, this study used shrinkage reducing typed Superplasticizer, which is combination of and water-reducing agent for convenience, different with existing study using AE agent, water-reducing agent, shrinkage reducing agent,. Considering SRS field application possibility, this study planned to mix concrete and mortar generally used in ready-mixed concrete company and did basic experiment depending on a change of SRS content ratio and admixture. Based on the experiment result. It is judged that SRS admixture 2% is proper ratio when Given the intensity and length change. Also mass combination will conduct follow-up studies.

A Study on Preferences for Apartment Interiors, Exteriors, and Neighborhood Environment for a Family Friendly Community Environment - Focused on Apartment Dwellers in Daejeon City- (가족친화마을 환경조성을 위한 주민들의 아파트 내.외부 및 근린환경 선호에 관한 연구 - 대전시 아파트 거주자를 중심으로 -)

  • Cha, Sung-Lan;Lee, Hae-Wook
    • Journal of Family Resource Management and Policy Review
    • /
    • v.15 no.2
    • /
    • pp.45-62
    • /
    • 2011
  • Since 2008, a communal child care and 'Family Pumasi' program have been conducted as a pilot project for the Healthy Family Support Center. These programs have been positioned as a step toward a family friendly community project. For the Healthy Family Support Centers, a family friendly community project is an essential program as a part of the policies in response to the country's low fertility. However, the people in charge face difficulties, because they do not have much experience in such projects. This study attempted to explore the preferences regarding interior and exterior apartment spaces, and neighborhood environment to provide information about how to better implement a family friendly community program. For this purpose, data were collected from 418 housewives who are apartment dwellers in Daejeon city. The results were as follows; first, the person in charge must consider child care facilities, culture, and sports centers in order to start building a community lifestyle. Second, people with relatively low levels of education and short terms of residence are more deeply motivated by community lifestyle compared to others. Third, families with their first young child showed much interest in communal child care facilities. If the people in charge can motivate and encourage such residents to be engaged in family friendly community projects, the project will effectively progress.

  • PDF

An Experimental Study on Combustion Characteristics of Aluminum Composite Panels for Flame Retardant and General Materials (난연소재와 일반소재 알루미늄복합패널의 연소특성 비교에 관한 실험적 연구)

  • Min, Se-Hong;Yun, Jung-Eun;Kim, Mi-Suk
    • Fire Science and Engineering
    • /
    • v.26 no.2
    • /
    • pp.105-111
    • /
    • 2012
  • In this research, aluminum composite panels of the general materials and fire retardant materials as building claddings make researches about fire performance comparison analysis. Test methods of the small and medium cone calorimeter experiments and SBI (Single Burning Item) experiments was applied to the determination. As a result, in the experiments peak heat release rate cone calorimeter the general aluminum composite panel $1,293kW/m^2$ ($75kW/m^2$), flame-retardant aluminum composite panel $70kW/m^2$ ($75kW/m^2$) was measured. In the SBI experiments fire growth rate the general fire aluminum composite panel is approximately 743 W/s and the flame-retardant aluminum composite panel is approximately 97 W/s of the value were measured. Thus, a standards enactment are urgently required in this case it is used as building claddings of the aluminum composite panel by fire risk assessment.

A Study on the Architecture and Extension Project for the Church of St. Lorenzo (성 로렌조 교회의 건축과 증축계획에 관한 연구)

  • Kim, Seok-Man
    • Journal of architectural history
    • /
    • v.23 no.6
    • /
    • pp.7-20
    • /
    • 2014
  • The purpose of this paper is to study on the architecture and extension project for the Church of St. Lorenzo. This study is composed of a through analysis of the extension elements on the church building and extension type for extension project of the Church of St. Lorenzo. The results of study are as follows: 1. The extension project for the Church of St. Lorenzo was basically consisted of the concept of a horizontal extension plan through both the interior and exterior space of the church building. This project was the plan of concept of additional or affixing extension through existing spaces with necessary spaces to make up for the previous simple space and form as well as functional aspect. 2. The unit spaces of the nave, the aisle, the small chapels bilaterally adorning the aisles, the transept and the chapels around transepts, and the sacristies by the extension project for the Church of St. Lorenzo is composed of regulation, balance and harmony as geometric space composition according to simple proportion system on whole and parts as well as parts and parts, through the definite articulation by each space zoning. 3. The most important innovative aspect different to previous churches in the extension project for the Church of St. Lorenzo is the compositive system of each other symmetrical spaces through long centrical axis of central part, applying the module system for horizontal arrangement. In particular, the use of regular module on repetition and proportion of rhythm from architectural composition system was precisely composed with the alter that consists of visual focus to express more accurate perspective.

Evaluation on the Basic Properties of Polyurethane Composite Sheet Reinforced with Non-Woven Fabric (면섬유가 보강된 폴리우레탄계 복합시트의 기초 물성 평가)

  • Kim, Ji-Hyun;Do, Seung-Bae;Park, Jeong-Won;Nam, Gee-Yoong;Chung, Chul-Woo
    • Proceedings of the Korean Institute of Building Construction Conference
    • /
    • 2017.05a
    • /
    • pp.238-239
    • /
    • 2017
  • Waterproofing is a very important process in terms of durability of buildings. The materials used for waterproofing work to protect the concrete structure from external deterioration factors. In particular, the waterproofing materials applied to the exterior of the concrete structure have various problems due to changes in the external environment and variables in the construction process. The waterproof layer is repeatedly dried and shrunk according to changes in the external moisture environment, and the surface may be deteriorated due to exposure to long-term sunlight. In the case of the roof waterproofing in the structure, the waterproof layer which does not have a sufficient curing period shows much swelling and floating phenomenon. These defects, such as swelling and lifting, account for most of the defects that occur in the waterproof layer of the concrete slabs. Generally, it is difficult to expect the same level of performance as the initial state even if the waterproofing work is repaired when a defect occurs. Therefore, it is possible to reduce the defects of the waterproof layer such as swelling and lifting by forming a waterproof layer which can be integrated with the concrete surface by using a polyurethane type waterproofing material having a relatively low defective ratio compared to other waterproofing materials. So in this study, the basic properties of polyurethane waterproof sheet reinforced with non-woven fabric are investigated in order to understand field applicability.

  • PDF

A Development of NURBS-Based Pre and Post Processor for Structural Analysis of Free-Shaped Beam (자유형상 보요소 해석을 위한 NURBS기반의 전·후처리 모듈 개발)

  • Jung, Sung-Jin;Park, Se-Hee
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.16 no.10
    • /
    • pp.6673-6678
    • /
    • 2015
  • Recently, the free form buildings are constructed frequently. Exterior and interior components of these buildings have the free cross-section and a curved shape. So, There are many usages of classical finite element having tapered section and free-style shape. Some general commercial applications like ETABS, SAP2000, MIDAS are usually used for the safety evaluation of the free form structures. However, there are some limits in the accuracy of structural analysis and the length of analysis time because a very complicated finite element mesh have to be used. Therefore, In this study, a pre and post program module was developed to take advantage of general 3-D curved beam element which has a free-style curved shape and mathematical backgrounds. Pre-post processing module has been developed in this study was developed to control the curvature of the curved members by the NURBS control points. As a result, fast geometric modeling than was possible commercial applications. In addition, realistic depiction of the shape and behavior patterns were possible because of the free-form building allows visual check of the free form.

A study on thermal simulation for extensive green roof system using a plant canopy model (식생캐노피모델을 통한 저관리 조방형 옥상녹화시스템의 열해석 전산모의에 관한 연구)

  • Kim, Tae Han
    • Journal of the Korean Society of Environmental Restoration Technology
    • /
    • v.15 no.2
    • /
    • pp.137-147
    • /
    • 2012
  • GRS is an effective urban ecology restoration technique that can manage a variety of environmental functions such as ecological restoration, rainwater spill control and island heat effect from a low-impact development standpoint that can be utilized in new construction and retrofits. Recently, quantitative evaluation studies, both domestic and abroad, in the areas related to these functions, including near-earth surface climate phenomenon, heavy rainwater regulation, thermal environment of buildings, have been actively underway, and there is a trend to standardize in the form of technological standards. In particular, centered on the advanced European countries, studies of standardizing the specific insulation capability of buildings with green system that comprehensively includes the green roof, from the perspective of replacing the exterior materials of existing buildings, are in progress. The limitation of related studies in the difficulties associated with deriving results that reflect material characteristics of continuously evolving systems due in part to not having sufficiently considered the main components of green system, mechanisms of vegetation, soils. This study attempts to derive, through EnergyPlus, the effects that the vegetation-related indicators such as vegetation height, FCV, etc. have on building energy load, by interpreting vegetation and soil mechanisms through plant canopy model and using an ecological standard indicator LAI that represent the condition of plant growth. Through this, the interpretations that assume green roof system as simple heat insulation will be complemented and a more practical building energy performance evaluation method that reflects numerical methods for heat fluxes phenomena that occur between ecology restoration systems comprised of plants and soil and the ambient space.

Architectural Embodiment of National Identity: Finnish National Romanticism around 1900 (민족 정체성의 건축적 구현: 1900년 전후의 핀란드 민족낭만주의 건축에 관한 고찰)

  • Kim, Hyon-Sob
    • Journal of architectural history
    • /
    • v.14 no.4 s.44
    • /
    • pp.59-72
    • /
    • 2005
  • Architectural embodiment of a national identity has long been a significant topic in Korean architectural circles. For this reason, it must be helpful to examine the so-called, 'National Romanticism' of Finnish architecture around 1900 in that Finnish architects of the time struggled to embody their national identity through their projects. Considering the historical and linguistic affinities between Finland and Korea, the Finnish architectural situation draws . our additional attention. This paper aims at showing its historical background, the meaning of each type of buildings in the stream, and limitations it implies. The atmosphere of Finnish nationalist movement, which was provoked by [Kalevala] publications (1835; 1845) and shown in Karelianism, was heightened by Tsarist Empire's Russification programme of Finland in the late 19th century Architecture was one of the most important genres expressing her national identity. Finnish national romantic architecture could be divided into three. The first is a log house style for artists' studio house, motivated by the Finnish vernacular farmstead - especially by Karelian farmhouse. This type of building signifies the Finns' will to return to their motherly soil. The second is a stone architecture style for public buildings, inspired by Finnish church or castle of an early medieval time. By using roughly-cut granite as the main exterior material, buildings of this type symbolise the toughness of legendary heroes and Finns' desire for national Independence. The third type of building was based on both of the former or more dependent on architects' Imagination and creativity. However, Finnish national romantic architecture has been criticised by some critics owing to its decorative, eclectic and self-indulgent characteristics. Probably, it was not really national but rather inter-national because of the Influences of English Arts and Crafts Movement, the American Richardsonian architecture and the continental Art Nouveau. And the negative images of 'national' and 'romantic' made some historians coin other terms like 'national realism' or 'material realism'. As another limitation, one raises the low degree of its contribution to the entire architectural history. Despite these criticisms, however, this paper argues that Finnish national romantic architecture is meaningful in itself, particularly because it illustrates vividly Finns' struggle to search for their national identity and, after all, their craving for national independence.

  • PDF

Comparative Analysis on Interior Spaces of the Selected Historical Residences in the Western and Eastern Countries - focusing on case residences of Korea, China, Japan, Rome, Egypt, and Italy - (동서양 전통적인 주택 양식의 실내공간 특성 비교분석 연구 - 한국, 중국, 일본, 로마, 이집트, 이태리의 사례주택을 중심으로-)

  • 김연정;이연숙
    • Korean Institute of Interior Design Journal
    • /
    • no.27
    • /
    • pp.152-161
    • /
    • 2001
  • At the multi-cultural society, research is needed to encourage a social atmosphere for enhanced understanding and respect for different cultures & countries. The purpose was to analyze the characteristics of spatial arrangement, space connection, Interior decoration and the relationship among these three features, which showed each country's unique housing form tradition. Three representative cases of historic residences from each country were selected on the basis of a recognized historic architecture directory. Total 18 residences from 6 countries - Korea, China, Japan, Rome, Egypt, and Italy - were comparatively analyzed. As results, aspects generally found in Eastern countries, were the fence as the semi-open boundary between the inside and the outside of the house, the flexibility of spatial opening and partitions between rooms, and finally simple and movable decoration features. On the other hands, aspects appeared in Western countries, were the outer wall of the building as the boundary to the outside, the closed and fixed properties of the room partitions, and finally complex and fixed decoration features. The research also showed that even within the same culture, the degree of openness varied. Each feature of space was related and could be explained within the same context. Housing, regardless of country and culture, tried to accommodate the exterior space inside the building as much as possible. The common pursuit was transformed to various visible forms and its reason might be due to different socio-cultural and environmental backgrounds that need to be continuously explored in academic area.

  • PDF