• 대한원격탐사학회지
• /
• 제39권5_4호
• /
• pp.1097-1109
• /
• 2023

도심지는 개별 건물단위의 소규모 변화가 빈번하게 발생하는 지역이다. 기 구축된 건물 데이터베이스는 그 활용도를 높이기 위해 도심지 내의 주기적인 갱신이 요구된다. 그러나 광범위한 도심지에 대한 건물 단위 변화를 관측하기에는 자료수집의 한계가 존재한다. 따라서 본 연구에서는 넓은 범위를 단일 영상으로 촬영 가능한 위성영상을 활용하여 건물변화 탐지와 건물 정보의 갱신 가능성을 확인하고자 한다. 이를 위해 먼저 건물 데이터베이스에서 제공하는 건물 모서리점의 3차원 좌표를 이용하여 위성영상에 건물 영역을 투영한다. 투영된 건물 영역을 다시 지붕 및 전면 영역으로 구분한다. 투영된 지붕영역의 화소값을 비교하여 건물높이 갱신, 건물멸실 등 건물변화 여부를 탐지한다. 건물높이 갱신은 영상에 투영된 지붕면이 실제 영상에서 관측되는 지붕면과 일치할 때까지 높이값을 조절하여 수행된다. 영상에 투영된 모습은 나타나나 관측되는 건물이 없는 경우 철거된 건물에 해당한다. 영상에서 관측되는 건물 중에서 지붕면과 전면영역이 투영되지 않은 건물은 신축 건물에 해당된다. 이러한 변화탐지 결과를 바탕으로 건물 데이터베이스를 높이갱신, 건물삭제 및 건물생성의 세가지 분류로 갱신한다. 제안된 방식은 인천지역을 촬영한 아리랑 3A호와 인천광역시 건물 데이터베이스를 사용하여 실험하였다. 입력 단일 위성영상을 이용하여 건물변화를 탐지하고, 갱신이 필요한 건물에 대해 건물 데이터베이스 편집 작업을 수행하였다. 갱신된 건물 정보를 검증하고자 이를 이용하여 다른 아리랑 3A호 영상에 건물영역을 투영하였다. 실험결과, 갱신된 건물정보로부터 투영된 건물영역은 영상에서 관측된 건물영역과 잘 일치하였다. 이를 통해서 단일 위성영상을 이용한 건물변화탐지 및 건물 데이터베이스 갱신 가능성을 확인하였다. 후속 연구로 제안방식의 자동처리기술 개발을 수행할 예정이다.

• 대한건축학회논문집:구조계
• /
• 제36권4호
• /
• pp.143-152
• /
• 2020

This study analyzes in detail greenhouse gas emissions in building sector. To this end, this study used data on building characteristics (including building type, region, and construction year) and monthly energy consumptions (including electricity, city gas, and district heat) for all buildings from 2015 to 2018. These data were collected from the National Building Energy Database and the energy consumptions were converted into greenhouse gas (GHG) emissions. The total amount of GHG emissions from the building sector has increased steadily from 2015 (118.1MtCO2eq.) to 2018 (132.6MtCO2eq.). On the other hand, the more recently constructed buildings had lower GHG intensities. This result shows that strengthening building design criteria was effective on the reduction of GHG emissions in buildings, and that the increased buildings contributed to increasing GHG emissions of the building sector. In addition, sales facilities are thought to have the largest reduction potential as they had the highest amount of GHG emissions and GHG intensity. This study is expected to help establish new policies for GHG reduction in building sector as well as to evaluate the effects of existing policies.

• 설비공학논문집
• /
• 제15권12호
• /
• pp.1060-1069
• /
• 2003

Our society becomes complex because technology is developing quickly. Especially, building services field deals with the important information that produces a drawing and manages the planning information and manpower. Therefore, the efficient management that connected with the construction information plays the important roles. The study develops a database by organizing systematically the various types of information using hypermedia. And, this study is to build the management system that can serve the various information that operated by DBMS on the web according to the DB structure. The information database was developed using internet web technology for building services field.

• 한국한의학연구원논문집
• /
• 제18권3호
• /
• pp.141-146
• /
• 2012

Objectives : KIOM(Korean Institute of Oriental Medicine) built up korean medical paper database and services it through information portal OASIS. The database are updated about 1,600 papers and 48,000 references annually. Because lots of manpower and time are needed to update database, it is very important to raise up efficiency and quality of it. Methods : In this paper, we implemented web based database building system utilizing pre-built OASIS' database to improve the working process, data quality and ease of management. Results : First we designed and implemented web based system to input bibliography of the paper efficiently. It raised efficiency using OASIS' paper and reference database. Second we improved the refining process using web based system to raise up data quality. And third we developed the manager functions of web based system to control and check the working process. Conclusions : If we add korean medical dictionary and link outside paper database in the future, we hope that work efficiency and data quality will be raised more. And because the database schema of OASIS system and developed system are different, we are implementing the data transformation system.

• Spatial Information Research
• /
• 제12권3호
• /
• pp.285-298
• /
• 2004

교통주제도는 건설교통부와 교통개발연구원이 '국가교통DB구축사업'의 일환으로 제작한 것으로, 국토지리정보원이 항공사진을 기반으로 하여 작성한 NGIS(국가기본 수치지도)를 수정ㆍ보완하여 교통계획ㆍ투자분석 등 교통목적으로 재구축한 수치지도이다. 또한 교통부분 지리정보시스템(GIS-T)분야에서 교통정책 및 계획수립 등에 활용되고 있는 필수적인 기초 데이터이다. 이러한 교통주제도는 국가의 교통 정책결정과 연구분석에 활용되는 자료로 객관적이고 신뢰성 있는 데이터베이스이어야 한다. 또한 현실세계의 교통망을 모델링하여 반영한 것이므로 분석 기준년도에 대응되는 현재성과 정확성이 요구된다. 이를 위해 첫째, 조사 및 구축 지침을 통해 일관된 데이터의 생성 및 구축이 보장되어야하고 둘째, 데이터베이스를 구축함에 따라 발생할 수 있는 기하학적ㆍ논리적 오류를 파악하여야하며 셋째, 항목별 검수 방법과 절차에 대한 지침을 가지고 일관적이고 체계적인 점검을 하여야 한다. 본 연구에서는 교통주제도 데이터의 가장 기본이 되는 노드와 링크를 대상으로 항목별, 검수 절차와 방법에 대한 지침을 설정하고 일관적이고 체계적으로 데이터의 오류를 점검함으로써 교통 네트워크의 객관적이고 신뢰성 있는 품질확보가 가능하도록 하였다.

• Wind and Structures
• /
• 제15권5호
• /
• pp.355-367
• /
• 2012

Atmospheric boundary layer winds experience two types of effects due to friction at the ground surface. One effect is the increase of the wind speeds with height above the surface. The second effect, called the Ekman layer effect, entails veering - the change of the wind speed direction as a function of height above the surface. In this study a practical procedure is developed within a database-assisted design (DAD) framework that accounts approximately for veering effects on tall building design. The procedure was applied in a case study of a 60-story reinforced concrete building, which also considered the dependence of veering effects on the orientation of the building. Comparisons are presented between response estimates that do not account for veering, and account for veering conservatively. For the case studied in this paper veering effects were found to be small.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 봄 학술논문 발표대회
• /
• pp.163-164
• /
• 2023

The technical proposal bidding system emphasizes the evaluation of the construction company's technical capabilities, with the aim of improving the quality and cost-effectiveness of the construction. However, in the VE analysis and proposal process for technical proposal bidding, the ideas are often reused from similar past construction projects, and the application of new construction technologies/methods is often lacking. Therefore, this study proposes a methodology for managing VE proposal information by integrating it into a BIM model using parametric modeling. This research developed database based on the existing VE proposals and new construction technology/method information from the Korea Institute of Civil Engineering and Building Technology. And by using parametric modeling, the proposed method integrate the VE database with BIM model. The methodology proposed in this study is expected to improve the reliability and effectiveness of VE-related idea proposals in technical proposal bidding.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 가을학술발표대회논문집
• /
• pp.163-164
• /
• 2023

The active promotion of construction technology application, aimed at cost reduction, construction time shortening, and performance enhancement during the implementation of Value Engineering (VE) in design, is underway. However, in the process of deriving VE ideas, it is common to simply reuse VE ideas from similar past construction projects, and the application of construction technology is often insufficient. Therefore, in this study, we intend to establish a database linking construction technology information with Building Information Modeling (BIM) models to activate the application of construction technology in the process of deriving VE ideas.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 1998년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.169-173
• /
• 1998

Three dimensional database of building use in Central Obihiro City was created and displayed using three dimensional graphics and quicktime movies. Then intra structure of Central Obihiro City was analyzed based on this database using GIS and the results were also displayed using three dimensional graphics and quicklime movies.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1999년도 가을 학술발표회 논문집
• /
• pp.444-451
• /
• 1999

The purpose of this study is to Propose data models for central database in integrated system for structural design building. In order to efficiently express data related to structure, I analyzed the structure design process and classified data considering design step. 1 used an object-oriented modeling methodology for logical data model and relational modeling for physical data model. Based on this model, we will develop an integration system with several applications for structure design. Each application will communicate through the central database.