• Proceedings of the KIEE Conference
• /
• 1987.11a
• /
• pp.79-81
• /
• 1987

Expert systems have a variety of potential applications in process control. The application domain ranges from the entire plant system to a single loop system. Both, off-line and real-time problems may be realized. In this paper, expert system is employed as a part of a single control loop of PID Controller with self-tuning. The goal of expert system in the present study is to build up the necessary process knowledge required for efficient control. In order to achieve this process, the development of an expert system and a prototype model is carried out. OPS5, a rule based production system, is utilized in experiment, and common LISP is used for man-machine interface.

• Journal of the Korea Safety Management & Science
• /
• v.1 no.1
• /
• pp.207-216
• /
• 1999

Too many big accidents have been occurring in Korea during '90. Those were accidents of Sung-Soo Bridge in 1994 and Sam-Poong Department Store in 1995. It was confirmed that the causes of the accident were unreliable construction or building. Therefore, in this study are to use technique of virtual reality(VR) simulation in order to prevent construction accidents. To set up the VR in safety construction, Date Base of variables, VR model and expert system are needed. This system is to build expert system, to visualize of the VR system and navigation, and to find out design errors of construction. Therefore, the purpose of this was to analyze accident type of construction, and apply VR system for simulation technique.

• Macromolecular Research
• /
• v.10 no.4
• /
• pp.194-203
• /
• 2002

In resin infusion process(RIP), the fiber and the resin are in contact with each other for an impregnation step and often results in flow-induced defects such as poor fiber wetting and void formation. Resin flow characteristics in transverse direction and process modeling for woven fabric were studied, and the process modeling was applied to the manufacturing of hybrid composite materials. This study also considered the compressibility of woven fabrics in a series of compression force, and it was fitted well to an elastic model equation. Void formation was varied with the processing conditions in the stage of manufacturing composites using RIP. It was concluded from this study that proper combination of pressure build-up and dynamic heating condition makes important factor for flow-induced composite processing.

• Journal of the Korea Safety Management & Science
• /
• v.4 no.1
• /
• pp.115-129
• /
• 2002

On a conceptual point of SCM, as a order of development, physical distribution, logistics management, basic supply chain management and advanced supply chain management etc. they are magnifying gradually, confusing with information and analysis techniques which seems possible. But on executing, it has a lot of problems because it is so complex and wide, so the enterprise which knows necessity of SCM, they don't have a total execution solution. On this paper, we will focus a proposal of alternatives with reasonableness of manufacturing and making a profit of sales department like most of enterprises to overcome carelessness and unready strategy of investment. And we will find a element through a analysis of cases, a statistical method of effective SCM, and actual survey to propose a alternative proposal. And, we will Prove the facts that it could be a guiding company which has a ability of cooperation with entities through the founding of supply chain, On the conclusion, we will show the variation which influences for capacity entities and alternative proposal to define a element which influence for a cause and effect basically.

• Transactions of the Korean hydrogen and new energy society
• /
• v.16 no.4
• /
• pp.324-333
• /
• 2005

The kinetics of external hydrogen embrittlememt is considered. The equation of the crack growth rate (CGR) is derived from modification of the model developed by Wilkinson and Vitek. After calculation of hydrogen pressure build-up in the void, the effect of the internal hydrogen pressure on the void growth is added. The CGR is expressed by two terms. One is the term dependent on the critical stress, which is exactly same as Wilkinson and Vitek. The other is term dependent on the pressure of the hydrogen in void.

• Proceedings of the KSME Conference
• /
• 2004.04a
• /
• pp.438-443
• /
• 2004

Court sport shoes is consisted of several functional parts such as soles, upper and midfoot reinforcements. Currently, intensive research for court sport shoes considering functional parts is in progress world widely, but the shoes design relies only on the view point of kinesilogy and biomechanics until now. Thus, more scientific and reliable evaluation of shoes characteristics is definitely required. In this paper, we evaluate the landing impact of court sport shoes by using finite element method. We construct a shoes-leg coupled FEM model which can simulate effectively impact in running mode. From the numerical analysis results, the designer can establish the advanced design concepts and build up the detailed design standard for the specific court sport shoes under consideration.

• Proceedings of the Safety Management and Science Conference
• /
• 1999.11a
• /
• pp.291-301
• /
• 1999

Too many big accidents have been occurring in Korea during '90. Those were accidents of Sung-Soo Bridge in 1994 and Sam-Poong Department Store in 1995. It was confirmed that the causes of the accident were unreliable construction or building. Therefore, in this study are to use technique of virtual reality(VR) simulation in order to prevent construction accidents. To set up the VR in safety construction, Date Base of variables, VR model and expert system are needed. This system is to build expert system, to visualize of the VR system and navigation, and to find out design errors of construction. Therefore, the purpose of this was to analyze accident type of construction, and apply VR system for simulation technique.

• Proceedings of the Korean Institute of Interior Design Conference
• /
• 2002.04a
• /
• pp.111-115
• /
• 2002

CAD System, which has been actively applied since late 80's, has become one of the most important tools in architectural design and has taken the central position in practical design processes. However, it is widely known that AutoCAD, the market-leading general-use CAD System, resulted in hindering the standardization of CAD System. This has been causing problems in communication among designers and inefficiency in their uses. The standardization in CAD System becomes an urgent issue. The study attempts to build up fundamental principles in standardization of CAD System, and to suggest a combinational model of international and domestic standards.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.2 no.2
• /
• pp.87-95
• /
• 2009

This research attempted to build up a system of security and identification for storage devices in a communication network. This identification Network System will configure security of information encoded and any computer data-medium by control of the access right of the user.

• Journal of Advanced Marine Engineering and Technology
• /
• v.20 no.3
• /
• pp.110-120
• /
• 1996

The purpose of this study is to build up the control scheme that promptly controls the pressure in a hydraulic cylinder having small control volume, using a PCV(proportional control valve) and a digital computer. Object pressure control system has the character to be unstable easily, because the displacement-flow gain of the PCV is so large considering comparatively small volume of the hydraulic cylinder and the time delay of response of PCV is long. Considering the above-mentioned characteristics of the object pressure control system, in this study, a control system is designed with two degree of freedom scheme that is composed by adding a feed-forward control path to I-PD control system, and the reference model is used to decide control parameters. And through some experiments on FF-I-PD, the validity of this control method is confirmed.