• Journal of Power System Engineering
• /
• v.16 no.6
• /
• pp.52-58
• /
• 2012

Roll forming process is one of the most widely used processes in the world for forming metals such as a furniture drawer guide or an up and down slide guide. It can manufacture goods of the uniform cross section on a large scale throughout the continuous processing. In the domestic design and manufacture, roll forming process for production is taking most of the method of 2-point under rail slide. However, this method is vulnerable to the structural strength and stiffness is not suitable for high load conditions. Therefore, through systematic study of high load, low noise 3-point ball type of under rail slide its own design and manufacturing technology is the need to build. In this paper, to make center member of 3-point ball-type under rail slide for the refrigerator doors, the roll forming modeling and simulation are performed. Tensile test is performed about SCP-1 1/2H for determine the mechanical properties of materials. Modeling and simulation of roll forming is used MSC.MARC software of a dedicated analysis program used by rigid plastic finite element method. Interference between the roll and the final shape are predicted from the results of the simulation.

• Journal of the Architectural Institute of Korea Structure & Construction
• /
• v.34 no.2
• /
• pp.57-66
• /
• 2018

When developing projects to build facilities to be shared by both military bases and surrounding communities, strategies are needed to achieve two objectives: 1) minimize missteps and opposition from local communities in the process of developing and implementing such projects, and 2) promote cost-benefit optimization and user-satisfaction. With aim of promoting co-operation and co-existence between military bases and adjust communities, this research proposes esthetical factors to be considered in conceiving civil-military sharing facilities. It seeks experts' opinions on the development of civil-military sharing facilities, and examines critical factors (economic feasibility, security, and satisfaction, etc.) for project development as well as building types suitable for shared-use between military bases and local residents. It then establishes a method to prioritize facility-type and narrow down design factors (considerations and restrictions) in project development by applying quantitative analysis. The methodological approach of the research employs the Delphi survey method to quantitatively analyze qualitative information drawn from experts' opinions. At the first round of the survey, facility types, items for consideration and restrictions are drawn, and then at the second round of the survey, criticality of each item is analyzed. Finally, it reaches a conclusion on suitability of facility types for civil-military sharing facilities, and selects project considerations and restrictions when developing this kind of project.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.39 no.4
• /
• pp.106-116
• /
• 2016

MTO (Make to Order) is a manufacturing process in which manufacturing starts only after a customer's order is received. Manufacturing after receiving customer's orders means to start a pull-type supply chain operation because manufacturing is performed when demand is confirmed, i.e. being pulled by demand (The opposite business model is to manufacture products for stock MTS (Make to Stock), which is push-type production). There are also BTO (Build to Order) and ATO (Assemble To Order) in which assembly starts according to demand. Lean manufacturing by MTO is very efficient system. Nevertheless, the process industry, generally, which has a high fixed cost burden due to large-scale investment is suitable for mass production of small pieces or 'mass customization' defined recently. The process industry produces large quantities at one time because of the lack of manufacturing flexibility due to long time for model change or job change, and high loss during line-down (shutdown). As a result, it has a lot of inventory and costs are increased. In order to reduce the cost due to the characteristics of the process industry, which has a high fixed cost per hour, it operates a stock production system in which it is made and sold regardless of the order of the customer. Therefore, in a business environment where the external environment changes greatly, the inventory is not sold and it becomes obsolete. As a result, the company's costs increase, profits fall, and it make more difficult to survive in the competition. Based on the customer's order, we have built a new method for order system to meet the characteristics of the process industry by producing it as a high-profitable model. The design elements are designed by deriving the functions to satisfy the Y by collecting the internal and external VOC (voice of customer), and the design elements are verified through the conversion function. And the Y is satisfied through the pilot test verified and supplemented. By operating this make to order system, we have reduced bad inventories, lowered costs, and improved lead time in terms of delivery competitiveness. Make to order system in the process industry is effective for the display glass industry, for example, B and C groups which are non-flagship models, have confirmed that the line is down when there is no order, and A group which is flagship model, have confirmed stock production when there is no order.

• Journal of the Korean Society of Safety
• /
• v.33 no.5
• /
• pp.141-149
• /
• 2018

In a PCB factory, there is a corrosive chemical substance supply system that can causes major leakage accidents. These accidents can give rise to shut down the factory and do residents damage that cause enormous loss of properties. To mitigate these risks, it is necessary to provide a chemical disaster prevention system. Moreover, after considering the situation and environment of the production site, it is of great importance to build an optimal chemical accident prevention system by reflecting risk reduction measures from the point of process design and by assessing quantitative risk based on reliability data. However, because there was no established database of the reliability about facilities and equipment that can be used in the domestic, the business site and consulting organization had being used the reliability data such as USA CCPS(Center for Chemical Process Safety). In these days, Korean institutes are studying on reliability data utilization method of quantitative risk assessment for preventing chemical accidents and domestic utilization algorithms and storage bed of reliability data. This study presents samples of reliability database about the chemical substance supply system that constructed from the history data such as failure, maintenance for 10 years at a PCB factory. Also, this work proposes the safety design criteria for supply facilities of corrosive chemical substance by assessing quantitative risk on the basis of the reliability data.

• Korean Journal of Oriental Medicine
• /
• v.18 no.3
• /
• pp.133-139
• /
• 2012

Objective : UMLS is 'Ontology' which establishes the database for medical terminology by gathering various medical vocabularies representing same fundamental concepts. Method : Although Chinese character are represented in the Chinese part of Korean Unicode system in a computer, writing of Chinese characters is vary depending on Chinese input systems and Chinese writers' levels of knowledge. As the result of this, representation of Chinese writing in a computer will be considerably different from an old Chinese document. Therefore, a meaningful relationship between digital Chinese terminology and translated Korean is necessary in order to build Ontology for Chinese medical terms from Oriental medical prescription in a computer system. Result : This research will present 1:1 mapping information among the Chinese characters used in the Oriental medical prescription with analysis of 'same character different sound' and 'same meaning different shape' in Chinese part of Unicode systems. Conclusions : Furthermore, the research will provide top-down menu of relationship between Chinese term and Korean term in medical prescription with assumption of that the Oriental medical prescription has its own unique meaning.

• The KIPS Transactions:PartD
• /
• v.18D no.2
• /
• pp.111-122
• /
• 2011

These days RFID application has been developed rapidly. It has been applied to many business areas such as logistics and supply chains. The Electronic Product Code (EPC) Network Architecture, an open global standard, is proposed by EPCglobal for developing RFID enabled systems. People who want to obtain the product information which are master information and event information have to apply with EPC Network Architecture. However, EPCIS which has master information and event information has to be accessed base on each EPC. Therefore, there is lots of duplicate accessing to EPCIS because RFID application has to access the same EPCIS over again which makes all performance down in EPC Network. This paper proposes how to reduce access times to EPCIS using EPC grouping based on EPCIS address. We build EPC Network environment to experiment about performance of RFID application system and we prove the improvement of EPC Network. Our result shows the reducing the EPCIS communication time by maximum 99 percentages.

• Proceedings of the Korean Society of Environment and Ecology Conference
• /
• 2003.10a
• /
• pp.23-29
• /
• 2003

It has been declared in 1992 at Rio about the management of united water control and method of the management of the water resources at the water basin. And it was also mentioned about the protection of fresh water's quality and it's supply under chapter the 18th of the agenda 21. It has been 10years passed after Rio declaration, and water crisis Is getting more serious than before. Fairly, right for using water resources was given to every life as the public resources. But at the last world water forum, water was commercialized, and regulated as the basic requirement not basic right. Therefore, we could use the water according to the logic of supply and demand at the market, and with money. Furthermore, construction of the big dam which was build to solve the problem of the lack of water became one of problems for water control. Korea is keeping consistent policy such as providing water by the building of dam. Control of the water demand is the most basic and effective policy for the preservation of water resources. If we change the policy such as the construction of the dam, we should put the management of the water demand in the center with the reliable philosophy. United management of the river basin has to be made with the security of water, improvement of water quality, and protection of the ecological side each other. Management of water basin also has to be completed to solve the trouble caused by using water conflict people who live up and down stream. To maintain the good quality of water, management of water basin is necessary. Also, bottom line of the united management of water basin is voluntary involvement of every citizens and local community. We suggest to preserve the origin of river and the upper at the ecological side. It is worth it to preserve.

• International Area Studies Review
• /
• v.13 no.1
• /
• pp.391-416
• /
• 2009

The purpose of this paper is to provide an ideal agreement proposal for the satisfactory settlement of FTA origin criteria negotiations, which will be the most severe issue in both inter-governmental FTA negotiations to begin in the near future. Towards this end, we, the authors, based on our nine FTA related agreements already concluded with other countries, researched the concrete origin criteria in the previous origin agreements, analyzed the characteristics of these agreements, and derived the ideal origin rule. As a result, we came to the conclusion that in consideration of Korea and China's FTA's substantial transformation test, it's better to choose any one criterion from the following. Criterion 1: CTH (Change of Heading) and Criterion 2: Value Added Criteria by 40% within region. In addition, we also did that in calculating the ratio of value added, the calculation method and price criteria should be more simple and standardized. It led to the conclusion that the objective deduction method should be used mainly and that CIF or FOB should be used as the price criterion.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.31 no.1
• /
• pp.71-86
• /
• 2013

This study was carried out to find the changed contents and details of the ponds at Jondeokjeong area in the Changdeok Palace, where was modified during the reign of King Gojong(高宗, 1863~1907), and considered the internal context through the diachronic views about royal garden building in the Joseon Dynasty. The results were as belows. First, this study found that the transformed time of the ponds at Jondeokjeong area was the 21th year of King Gojong(1884) based on the pictures taken in the last half of the 19th century and the records of "Gojongsilrok(高宗實錄: Annals of the King Gojong)". Second, this study also found that the remodeled ponds at Jondeokjeong area by King Gojong were followed the landscape of Geoncheong Palace(乾淸宮) and Hiangwon-pond(香遠池) in Gyeongbok Palace because the remodeled ponds of Jondeokjeong area had the spatial organization similar to Hiangwon-pond. Third, the bridge of remodeled ponds at Jondeokjeong area was utilized as the expedient to expand the function of rear garden, which combines the areas of Yungyungdang(演慶堂) and Jondeokjeong. This was the same method that Konchunggung(乾淸宮) in Gyeongbok Palace had occupied the whole area through the Chui-hiang bridge(醉香橋) which connects to the Hiangwonjeong(香遠亭). Fourth, ponds at Jondeokjeong area and Hiangwonjeong that were created during the year of King Gojong promised the use of Yungyungdang and Konchung Palace, and reflected the statuses of the two building-blocks. Lastly, this study concluded the remodeled Jondeokjeong ponds were not only to create the necessary spaces of the landscape for King Gojong, but also to build the space on the context of Huwonjeongdang(後苑政堂: political structure in rear garden), which has been passed down from their ancestors.

• Korean Journal of Heritage: History & Science
• /
• v.44 no.1
• /
• pp.196-221
• /
• 2011

The Royal Private Shrines or the Samyo(私廟), were dedicated to members of Choseon's royal family who could not be enshrined at the (official) Royal Ancestral Shrine, the Jongmyo(宗廟). The Samyo were constructed at the national level and were systematically managed as such. Because these private Shrines were dedicated to those who couldn't belong to the Jongmyo but were still very important, such as the ruling king's biological father or mother. The details of all royal constructions were included in the State Event Manuals, and with them, the two-dimensional layouts of the Samyo also. From the remaining "Hyunsa-gung Private Tomb Construction Layout Record(顯思宮別廟營建都監儀軌)" of 1824, which is the construction record of Gyeongwoo-gung Shrine(景祐宮) dedicated to Subin, the mother of King Sunjo(純祖), it became possible to investigate the so far unknown "The Painting of Gyeongwoo-gung Shrine", in terms of the year produced, materials used and other situational contexts. The investigation revealed that the "The Painting of Gyeongwoo-gung Shrine" is actually the "Hyunsa-gung Private Tomb Layout" produced by the Royal Construction Bureau. The bureau painted this to build Hyunsa-gung Private Shrine in a separately prepared site outside the court in 1824, according to the royal verdict to close down and move the temporary shrine inside the courtyard dedicated to Subin who had passed away in 1822. As the Construction Bureau must have also produced the Gyeongwoo-gung Shrine Layout, the painter(s) of this layout should exist among the official artists listed in the State Event Manual, but sadly, as their paintings have not survived to this day, we cannot compare their painting styles. The biggest stylistic character of the Painting of Gyeongwoo-gung Shrine is its perfect diagonal composition method and detailed and neat portrayalof the many palace buildings, just as seen in Donggwoldo(東闕圖, Painting of a panoramic view for Changdeokgung and Changgyeonggung Palaces). A well-perceiving architectural painting employs a specific point of view chosen to fit the purpose of the painting, or it can opt to the multi-viewpoint. Korean traditional architectural paintings in early ages utilized the diagonal composition method, the bird-eye viewpoint, or the multi-viewpoint. By the 18th century, detailed but also artistic architectural paintings utilizing the diagonal method are observed. In the early 19th century, the peak of such techniques is exhibited in Donggwoldo(Painting of a panoramic view for Changdeokgung and Changgyeonggung Palaces). From the perfect diagonal composition method employed and the details of the palace buildings numbering almost two hundreds, we can determine that the Painting of Gyeongwoo-gung Shrine also belongs to the same category of the highly technical architectural paintings as Donggwoldo(Painting of a panoramic view for Changdeokgung and Changgyeonggung Palaces). We can also confirm this hypothesis by comparing the painting techniques employed in these two paintings in detailthe way trees and houses are depicted, and the way ground texture is expressed, etc. The unique characteristic of the Painting of Gyeongwoo-gung Shrine is, however, that the area surrounding the central shrine building(正堂), the most important area of the shrine, is drawn using not the diagonal method but the bird-eye viewpoint with the buildings lying flat on both the left and right sides, just as seen in the "Buildings Below the Central Shrine(正堂以下諸處)" in the State Event Manual's Painting Method section. The same viewpoint method is discovered in some other concurrent paintings of common residential buildings, so it is not certain that this particular viewpoint had been a distinctive feature for shrine paintings in general. On the other hand, when the diagonalmethod pointing to the left direction is chosen, the top-left and bottom-right sections of the painting become inevitably empty. This has been the case for the Painting of Gyeongwoo-gung Shrine, but in contrast, Donggwoldo shows perfect screen composition with these empty margins filled up with different types of trees and other objects. Such difference is consistent with the different situational contexts of these two paintings: the Painting of Gyeongwoo-gung Shrine is a simple single-sheet painting, while Donggwoldo is a perfected work of painting book given an official title. Therefore, if Donggwoldo was produced to fulfill the role of depiction and documentation as well as the aesthetic purpose, contrastingly, the Painting of Gyeongwoo-gung Shrine only served the purpose of copying the circumstances of the architecture and projecting them onto the painting.