• Proceedings of the Korean Society for Bioinformatics Conference
• /
• 2003.10a
• /
• pp.133-138
• /
• 2003

The prediction of protein secondary structure has been an important bioinformatics tool that is an essential component of the template-based protein tertiary structure prediction process. It has been known that the predicted secondary structure information improves both the fold recognition performance and the alignment accuracy. In this paper, we describe several novel ideas that may improve the prediction accuracy. The main idea is motivated by an observation that the protein's structural information, especially when it is combined with the evolutionary information, significantly improves the accuracy of the predicted tertiary structure. From the non-redundant set of protein structures, we derive the 'potential' parameters for the protein secondary structure prediction that contains the structural information of proteins, by following the procedure similar to the way to derive the directional information table of GOR method. Those potential parameters are combined with the frequency matrices obtained by running PSI-BLAST to construct the feature vectors that are used to train the support vector machines (SVM) to build the secondary structure classifiers. Moreover, the problem of huge model file size, which is one of the known shortcomings of SVM, is partially overcome by reducing the size of training data by filtering out the redundancy not only at the protein level but also at the feature vector level. A preliminary result measured by the average three-state prediction accuracy is encouraging.

• Journal of the Korean housing association
• /
• v.23 no.5
• /
• pp.87-94
• /
• 2012

The primary purposes of this study are to suggest a medium-sized regeneration project which includes the excluded small sites near existing regeneration site, to identify urban improvement type which fits local conditions, and to suggest proper regeneration strategies for the improvement type. Main findings of this study are follows. First, the size of the living environment improvement project in urban area should be larger than 3ha and government's incentives are required for parcel merges to make the medium-size project site. Second, independent type of urban regeneration project should consider local characteristics while center-spread type of urban regeneration project should build a center by providing neighborhood facilities and proper housings. Third, urban regeneration project should be able to utilize local assets, such as cultural heritages, natural landscapes, transportation facilities. Fourth, standards for public support should be prepared to improve local competitiveness. Last, further studies are required for urban regeneration system improvement.

• Journal of Forest and Environmental Science
• /
• v.32 no.2
• /
• pp.173-181
• /
• 2016

This study designed a model of the efficient production schemes and raw materials transportation optimization of current South Korean's simple and monolithic distribution system of wood to build a SCM (supply chain management) as a basic level to establish a distribution of future by pellet production of raw materials costs and reduce transport costs, and specifically to forest of pallet to contribute to revitalizing the market. The result of each transportation costs after building the best transportation network from raw material supply area to demand area applying transport law was 964,600 thousands Won from 6 supply areas to 7 demand areas. And the result of each model's analysis to get the pellet's efficient production through production cost reduction showed that it reduced from 325,701 Won/t to 240,106 Won/t, results of existing efficient pellet for the production model 8,233 tons over 20,000 tons annual production capacity from the size of the expanded production capacity when the expansion. However, when the production size expanded to 50,000 Tons of the production, the effect was very small even though production cost decreased.

• Journal of Advanced Marine Engineering and Technology
• /
• v.27 no.3
• /
• pp.447-452
• /
• 2003

Crevice corrosion is localized form of corrosion usually associated with a stagnant solution on the micro-environmental level. Such stagnant micro environments tend to occur in crevices (shielded areas) such as those formed under gaskets washers insulation material. fastener heads. surface deposits. disbonded coatings. threads. lap joints and clamps. Crevice corrosion is initiated by changes in located electrochemical reaction within the crevice such as a) depletion of inhibitor in the crevice b) depletion of oxygen in the crevice c) a shift to acid conditions in the crevice and d) build-up of aggressive ion species (e.g chloride) in the crevice. In this study. the mechanism of crevice corrosion for Type 430 stainless steel is investigated undercondition that the size of specimen is $15{\times}20\{times}3mm$, in 1N $H_2SO_4$ + 0.05N NaCl solution. and the artificial crevice gap size of 3 x 0.2 x 15 mm. Crevice corrosion is measured under applied potential -300mV(SCE) to the external surface. The obtained result of this study showed that 1) the induced time for initiation of crevice is 750 seconds. 2) potential of the crevice was about from -320mV to -399mV. which is lower than that of external surface potential of -300mV It is considered that potential drop in the crevice is one of mechanisms for the crevice corrosion

• Journal of the Korea Safety Management & Science
• /
• v.9 no.5
• /
• pp.103-110
• /
• 2007

To build a most efficient and competitive warehouse, need to reflect tenants various opinions in advance such as location, rentable size, leasing terms, rental, configuration of the building, building structure, traffic flow and amenities. Thus a survey for major tenants which are logistics, retailers and manufactures should be done to figure out potential demand and marketing strategy to lead to be a competitive warehouse. However above survey is time consuming work and requires high cost involvement thus to avoid such an inefficient process and to facilitate investors prompt and right decision making, there should be a tool which helps to make a decision process easier with simple key factors. In other word, we have used above mentioned 'Demand Approach' so far but here I am introducing 'Factors Comparison' which reflects location factors and facility factors. I derived Kwang-myung logistics park's proper rental rate through 'Demand Approach' which analyzed Seoul Metropolitan area's rental warehouse status and rents, and also defined a size of potential demand area and rental. And this report compared the result with an outcome of 'Factors Comparison' then compared each methods and drew a conclusion of 'Factors Comparion's better convenience and efficiency.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.6 no.1
• /
• pp.51-59
• /
• 1982

Growth is marked by changes in body shape as well as in body size. Increase in size is described quantitatively by increments over time : changes in shape are complex and perhaps are not possible to quantify satisfactorily. Simply to define or describe static body shape quantitatively is difficult, and traditionally simple ratios or indices have been used. In order to find out the body proportion and the body type of the Korean males and females from 6 to 24 years, the material of measurements obtained by the Korean Body-build Investigations (measured in 1979) was calculated and analyzed. The results are as follows: 1. The growth of the trunk part of the body precedes that of the lower part. Comparing the growth rate of male and female, the latter is higher than the former, especially in 12. 2. When a comparison is made between 6, 9, 12, 15 years and grown-ups(20$\~$24 years) with their respective stature's taken as 100, then values of these children are larger in the measurements related with head, acromial and waist height but smaller in lower extremities than these of the grown-ups. 3. Body proportion changes gradually from infant to adult body type indicating different phases each sex.

• Proceedings of the Korea Society for Simulation Conference
• /
• 2003.11a
• /
• pp.3-10
• /
• 2003

Developments in science and technology based on computer technology influenced military fields and created up-to-date weapons and equipment, and as a result, which is changing the war accomplishing methods of the future warfare. Due to these changes in the war accomplishing methods, the army command centers are requested to make changes in their decision-making process. In other words, they need to apply more scientific methods rather than just build a scheme by the mere analysis of commanders and the staffs as in the past. Consequently, we propose a model, Vision 21 we developed as a war game model for division-size unit analysis use, in the COA development process, which is the most important part in establishing the OPLAN for mission accomplishment. Vision 21, with a comparative analysis of the other COA built in the COA development process, can be applied to making the best COA. Model employment concept can let us choose the best COA, operating war games on condition that the COA of the opposite forces is fixed and ours sequentially opposed against, and with a comparative analysis also. Moreover, if the time available is limited, before establishing several courses, we can apply the COA to the process for making the best decision, analysing in stages or by main phases and not establishing several courses for a special purpose.

• Plant Journal
• /
• v.7 no.4
• /
• pp.67-76
• /
• 2011

Two main features of the recent building project are the enlargement of the size and the technological complexity. Due to these features, the number or the size of organizations participating in building project is also increasing and the relationships between the organizations are becoming more interdependent than ever. Owing to these features, some delays or errors in the decision-making process in the phase of planning of a building project may influence many subjects related to the project. The most important factor for a successful project is to arbitrate confrontations and build cooperative relationships between parties who have different interests with one another in the project. Efforts were made to find out general features of building project and the features in the phase of planning in order to set a direction of this research. To solve problems in the phase of planning, the concept of 'cooperative design', which means that different features and interests of various organizations should be reflected from the phase of planning, was introduced. By introducing cooperative design in building projects, more rapid and objective decision-makings are possible.

• The Journal of Asian Finance, Economics and Business
• /
• v.8 no.1
• /
• pp.295-304
• /
• 2021

This study aims to identify and analyze the impact of internal factors on business efficiency of steel firms in Vietnam. The article uses data collected from the financial statements of 26 steel firms operating in Vietnam between 2012 and 2019. With the application of E-view software in quantitative analysis to build regression models on the table data (panel data), and the study has built a regression model identifying the relationship and impact level of internal factors affecting business efficiency of steel firms in Vietnam. In the study, the dependent variable is business efficiency, determined by the profit after tax on the firm's assets. The independent variables are firm size, growth rate, capital structure, ratio of long-term assets, receivables management, and solvency. The research results show that the four factors of firm size, growth rate of assets, receivables management, and solvency have a positive impact on business efficiency, while two factors including capital structure and ratio of long-term assets do not affect business efficiency of enterprises. The results of this article are very useful for corporate executives in general and for financial managers in particular, helping managers make the right financial decisions for the company to promote business efficiency of the company.

• Advances in nano research
• /
• v.12 no.4
• /
• pp.387-403
• /
• 2022

Silica nanoparticles, which have a broad range of sizes and specific surface features, have been used in many industrial applications. This study was conducted to synthesize monodispersed silica nanoparticles directly from tetraethyl orthosilicate (TEOS) with an alkaline catalyst (NH₃) based on the sol-gel process and the Stöber method. A central composite design (CCD) is used to build a second-order (quadratic) model for the response variables without requiring a complete three-level factorial experiment. The process was then optimized to achieve the minimum particle size with the lowest concentration of TEOS. Dynamic light scattering and scanning electron microscopy were used to analyze the size, dispersity, and morphology of the synthesized nanoparticles. After optimization, a confirmation test was carried out to evaluate the confidence level of the software prediction. The results revealed that the predicted optimization is consistent with experimental procedures, and the model is significant at the 95% confidence level.