• ETRI Journal
• /
• v.26 no.2
• /
• pp.181-184
• /
• 2004

For communication between heterogeneous conference systems, it is important to build a conference control protocol independent from signaling protocols. We simulate an XML-based conference control that is under consideration as a standard mechanism. We describe the framework and operations for easy implementation in heterogeneous conference systems. The simulation results show that the proposed control protocol provides a consistent service for an increasing number of conferences and participants in small to mid-size centralized conferencing.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.41 no.8
• /
• pp.69-78
• /
• 2004

In this paper, we estimated the exact software defect density to build up a suitable model that is closely related to the size of module in the probability model proposed by MD (Malaiya and Denton). To put it concretely, we predict that the software defect density using some practical data sets that are the outcomes from the system test performed our three projects for the types of distribution (exponential and geometric), per a unit of module, and the size of source line that have been recommended by KLOC(kilo-line-of-code). Then, we make comparison between our proposed defect density model and those examined real data.

• Journal of Preventive Medicine and Public Health
• /
• v.40 no.2
• /
• pp.95-101
• /
• 2007

Focusing on complex diseases of public health significance, strategic issues regarding the on-going Korean Genome Cohort were reviewed: target size and diseases, measurements, study design issues, and follow-up strategy of the cohort. Considering the epidemiologic characteristics of Korean population as well as strengths and drawbacks of current research environment, we tried to tailor the experience of other existing cohorts into proposals for this Korean study. Currently 100,000 individuals have been participating the new Genome Cohort in Korea. Target size of de novo collection is recommended to be set as between 300,000 to 500,000. This target size would allow acceptable power to detect genetic and environmental factors of moderate effect size and possible interactions between them. Family units and/or special subgroups are recommended to parallel main body of adult individuals to increase the overall efficiency of the study. Given that response rate to the conventional re-contact method may not be satisfactory, successful follow-up is the main key to the achievement of the Korean Genome Cohort. Access to the central database such as National Health Insurance data can provide enormous potential for near-complete case detection. Efforts to build consensus amongst scientists from broad fields and stakeholders are crucial to unleash the centralized database as well as to refine the commitment of this national project.

• Smart Structures and Systems
• /
• v.22 no.6
• /
• pp.663-673
• /
• 2018

In this study, the effect of particle size on the cracks propagation and coalescence or cracking pattern of the edge notched disc specimens are investigated. Firstly, calibration of PFC3D was performed using Brazilian experimental test output. Then micro parameters were used to build edge notched disc specimen. The horizontal wall of the assembly is let to move downward with a standard low speed of 0.016 m/s. The numerical results show that the tensile cracks are dominant failure pattern for the modeled discs. These tensile cracks initiate from the pre-existing notch tip and propagate parallel to the loading direction then interact with the upper boundary of the modeled specimen. As the size of the balls (ball diameter) decrease the number of tensile cracks increase. The tensile fracture toughness of the samples also decreases as the particle size increases. Understanding the crack propagation and crack coalescence phenomena in brittle materials such as concretes and rocks is of paramount importance in the stability analyses for engineering structures such as rock slopes, underground structures and tunneling.

• Proceedings of the Korean Institute of Interior Design Conference
• /
• 2004.05a
• /
• pp.161-166
• /
• 2004

In recent years, living space of modern society have vared, and new methods to build have been introduced using new building materials and interior finishing materials as the life level is enhanced. But these kinds of materials release some harmful substances to people. The most of people living in new apartment have headache and dizziness, and feel sick of the stomach, sleepiness, eye stimulus, concentration decrease and allergies. That called 'sick house syndrome'is becoming new society problem. The purpose of this study is to investigate the kinds and various problems of the interior finishing materials and to pursue improvement of living place and pleasant interior surroundings.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.7 no.6
• /
• pp.106-114
• /
• 1999

Today, one of the most important objective in automobile development is to reduce the weight of automobile . The eventual depletion of petroleum and environmental regulations brought considerable emphasis to this area on increasing fuel efficiency. Conventional intake air-fuel system is very heavy because it is composed of numerous parts. The bulky size caused increase in the amount of metal being used to build automobile chassis and this became a serious weight problem. The size also caused difficulties in optimization of fuel supply system which in turn decreased engine efficiency. Currently , there are efforts to integrate several intake system modules into one. The purpose of this paper is to evaluate the directions of such development.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2010.05a
• /
• pp.191-194
• /
• 2010

Construction companies are now trying a variety of cost-cutting strategies in the midst of recent slump of construction market. Notably, contract workers and local hires are accounting for increasing portion of management manpower as a part of their cost-reduction drive. However, construction site manpower researches to date have focused primarily on productivity analysis of site laborers, with little attention to the productivity of site management resources. This study aims to analyze the staffing status of office building construction site management manpower in reference to project size. Conclusions herein will provide basic inputs for subsequent attempts to build a model to enable efficient staffing of construction site management manpower.

• Publications of The Korean Astronomical Society
• /
• v.18 no.1
• /
• pp.37-41
• /
• 2003

We have developed a seeing monitoring system and measured seeing variation of the Bohyunsan Optical Astronomy Observatory (BOAO) and the Sobaeksan Optical Astronomy Observatory (SOAO) using a small telescope system. Our seeing monitoring system is similar to the differential image motion monitor (DIMM) installed at the ESO. The ooly difference between the BOAO and the SOAO seeing monitoring system is a detector system, a video camera at the BOAO and ST-4 camera at the SOAO. We confirmed that the seeing monitoring system at the SOAO can measure average seeing size inspite of its simple detector system. From the BOAO seeing measurement, we found that the seeing size changes fast. We expect that our seeing monitoring system could be used for real time seeing monitoring after some improvement, and the data to be obtained would be very useful when we build adaptive optic system in the future.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2003.04a
• /
• pp.165-168
• /
• 2003

Almost all buildings/infrastructures made of composite materials are fabricated without proper design. Unlike airplane or automobile parts, prototype test is impossible. One cannot destroy 10 story buildings or 100-meter long bridges. People try to build 100-story buildings or several thousand meter long bridges. In order to realize "composites in construction", the following subjects must be studied in detail, for his design: Concept optimization, Simple method of analysis, Folded plate theory, Size effects in failure, and Critical frequency. Unlike the design procedure with conventional materials, his design should include material design, selection of manufacturing methods, and quality control methods, in addition to the fabrication method.on method.

• Asia pacific journal of information systems
• /
• v.10 no.2
• /
• pp.97-123
• /
• 2000

This paper proposes a model for assessing enterprise network maturity. We define maturity in terms of the institutional and member support for the network(organizational maturity) and its technical sophistication(technological maturity), and examine their relationships. We build several hypotheses about the relationships between the maturity types and between the maturity of the network and various organizational factors including industry, size, and performance of the enterprise. We test the hypotheses using data collected from a questionnaire survey with Korean firms. The results show that there is a positive correlation between organizational and technological maturity. It is also found that investment in the network infrastructure has a positive influence on the organizational efficiency. However, it is found that industry type does not affect network utilization, but size does, suggesting that large firms utilize network infrastructure more than small ones do. We also identify various relationships among performance, satisfaction level and the maturity of the enterprise networks. Finally, we provide an overview on the current technological state of the Korean enterprise networks.