• 한국정밀공학회지
• /
• 제16권11호
• /
• pp.191-196
• /
• 1999

This stability of a plate structure is very crucial problem which results in wrinkle and bucking. In this study, the effect of the pattern of spot-welding points of the two rectangular plates on the compressive buckling load is studied with respect to the thickness, aspect ratio of plates, number of welding spots. buckling coefficient of the plate not welded was compared with that of two plates with various thickness to extract the effect of thickness. The effect of number of welding spots are studied in tow directions, longitudinal and transverse directions. The conclusions obtained were that the reinforcement effect was maximized when the aspect ratio was close to 1.25 and that the effect of number of welding spots in transverse direction was large than that in longitudinal direction.

• Advances in nano research
• /
• 제12권6호
• /
• pp.593-603
• /
• 2022

The critical buckling temperature rise of a newly proposed piezoelectrically active sandwich plate (ASP) has been investigated in this work. This structure includes a porous polymeric layer integrated between two piezoelectric nanocomposite layers. The piezoelectric material is made of a passive polymeric material that is activated by lead-free nanowires (NWs) of zinc oxide (ZnO) embedded inside the matrix. In both nanocomposite layers and porous core, functional graded (FG) patterns have been considered for the distributions of ZnO NWs and voids, respectively. By adopting a higher-order theory of plates, the governing equations of thermal buckling are obtained. This set of equations is then treated using an extended mesh-free solution. The effects of plate dimensions, porosity states, and the nanowire parameters have been investigated on the critical buckling temperature rises of the proposed lightweight ASPs with different boundary conditions. The results disclose that the use of porosities in the core and/or mixing ZnO NWs in the face sheets substantially arise the critical buckling temperatures of the newly proposed active sandwich plates.

• 대한조선학회논문집
• /
• 제34권3호
• /
• pp.53-60
• /
• 1997

일반적으로 선박 판부재의 좌굴강도에 대한 안전성 평가는 선체구조 설계단계에서 반드시 거쳐야 할 단계로 한 척의 배는 수많은 판부재로 구성되어 선박구조 전체에 대한 이론적이며 체계적인 시스템을 이용한 좌골강도평가의 정확도 및 효율성이 강조되고 있다. 그러나 현재의 판부재 좌굴강도를 평가하는 각 선급의 규정치가 많은 영향인자를 고려치 않고 있거나 함축척으로 고려하고 있기 때문에 경우에 따라서는 좌굴강도가 상당한 안전측의 값을 제시하는 등 실제 선급규정치의 사용에 제약을 주기도 한다. 따라서 본 연구에서는 면내인장력의 영향등 선급들의 좌굴 규정치뿐만이 아니라 면내인장력의 효과, 경계조건, 횡하중 및 잔류응력등을 고려하면서 손쉽게 좌굴평가를 수행할 수 있는 선진 좌굴평가시스템을 개발하였다. 이들 선진 좌굴평가시스템을 이용하면 선박판부재의 보다 정도 높고 효율적인 평가가 가능하리라 생각되며 앞으로 대중적인 사용을 위해 워크스테이션 외에도 개인용 컴퓨터에서의 시스템 구축을 계획하고 있다.

• 한국기계가공학회지
• /
• 제20권1호
• /
• pp.80-87
• /
• 2021

Most container ships are currently being constructed as Ultra-Large Container Ships. Hence, the equipment of the ships is also becoming relatively large. In particular, propellers, rudders, and rudder stocks are large in the stern structure, and in relation, efficient design of the hull structures to safely secure these parts is important. The bottom shell plate surface of a stern skeg is a perforated plate from which the rudder stock penetrates, so it is an important component for the stern structure. In this paper, to determine the critical buckling of the shell plate, an interaction curve equation for the two-axis compression of the shell plate was derived using the maximum value of the static structural stress multiplier in a load multiplier mode. This equation predicts the timing of the buckling occurrence. By analyzing this interaction curve equation, the buckling behavior of the plates subjected to a combination load was determined and the usefulness of applying it to ship building was investigated.

• Steel and Composite Structures
• /
• 제45권5호
• /
• pp.729-747
• /
• 2022

The critical buckling loads and buckling modes of bi-directional functionally graded porous unified higher order shear plate with elastic foundation are investigated. A mathematical model based on neutral axis rather than midplane is developed in comprehensive way for the first time in this article. The material constituents form ceramic and metal are graded through thickness and axial direction by the power function distribution. The voids and cavities inside the material are proposed by three different porosity models through the thickness of plate. The constitutive parameters and force resultants are evaluated relative to the neutral axis. Unified higher order shear plate theories are used to satisfy the zero-shear strain/stress at the top and bottom surfaces. The governing equilibrium equations of bi-directional functionally graded porous unified plate (BDFGPUP) are derived by Hamilton's principle. The equilibrium equations in the form of coupled variable coefficients partial differential equations is solved by using numerical differential integral quadrature method (DIQM). The validation of the present model is presented and compared with previous works for bucking. Deviation in buckling loads for both mid-plane and neutral plane are developed and discussed. The numerical results prove that the shear functions, distribution indices, boundary conditions, elastic foundation and porosity type have significant influence on buckling stability of BDFGPUP. The current mathematical model may be used in design and analysis of BDFGPU used in nuclear, mechanical, aerospace, and naval application.

• 한국강구조학회 논문집
• /
• 제17권6호통권79호
• /
• pp.707-715
• /
• 2005

파형강판은 파형 형상으로 가공된 강판으로 높은 면내, 면외 방향의 강성을 갖으며, 건물, 교량 등으로 적용도가 높아지고 있다. 파형강판을 플레이트 거더나 프리스트레스트 박스거더교의 복부판으로 적용하면, 파형강판의 아코디언 효과에 의해 플랜지가 휨응력을 복부판이 전단응력을 대부분 지지하는 효율적인 구조를 얻을 수 있다. 전단응력을 받는 파형 강판은 전체좌굴, 국부좌굴 및 연성좌굴에 의해 내하력을 상실할 수 있다. 세 가지 좌굴 모드 중 연성 좌굴에 대한 명확한 분석은 거의 이루어지지 않았고 보수적인 강도 예측을 위한 강도 감소식이 사용되고 있다. 따라서 본 연구에서는 연성 좌굴 거동에 미치는 기하학적인 인자들의 영향을 파악하기 위하여 유한요소해석법을 이용한 좌굴해석이 수행되었다. 해석 결과는 연성 좌굴은 패널의 세장비와 북부판 높이 두께비의 복합변수에 의존하는 것으로 나타났다.

• 복합신소재구조학회 논문집
• /
• 제5권3호
• /
• pp.1-7
• /
• 2014

Buckling, a form of failure happened to plated structures, is investigated in this study. The main focus is to investigate the effects of thickness of the plates having through-thickness holes on buckling when the plate is subjected to in-plane compression. Plates having length of 200mm and width of 100mm are chosen to have thickness in range from 0.50mm to 10mm. Two holes of diameters of 20mm are implemented in plates. The finite element procedure using ABAQUS is applied for analyses. Then using the Gerard and Becker equation compressive buckling coefficients, Kc, are calculated and presented to enable engineers to calculate buckling load for the desired plate with holes in specific dimension. In order to generalize the obtained results, verification analysis has been performed by taking plates having different dimensions from the original ones used in this study. The verification showed the capability of buckling coefficients to predict buckling stresses of plates in various dimensions.

• International Journal of Aeronautical and Space Sciences
• /
• 제12권1호
• /
• pp.1-15
• /
• 2011

This paper reviews most of the research done in the field of tensile buckling characteristics pertaining to aerospace structural elements with special attention to local buckling and parametric excitation due to periodic loading on plate and shell elements. The concepts of buckling in aerospace structures appear as the result of the application of a global compressive applied load or shear load. A less usual situation is the case, in which a global tensile stress creates buckling instability and the formation of complex spatial buckling pattern. In contrast to the case of a pure compression or shear load, here the applied macroscopic load has no compressive component and is thus globally stabilizing. The instability stems from a local compressive stress induced by the presence of a defect, such as a crack or a hole, due to partial or non-uniform applied load at the far end. This is referred to as tensile buckling. This paper discusses all aspects of tensile buckling, theoretical and experimental. Its far reaching applications causing local instability in aerospace structural components are discussed. The important effects on dynamic stability behaviour under locally induced periodic compression have been identified and influences of various parameters are discussed. Experimental results on simple and combination resonance characteristics on plate structures due to tensile buckling effects are elaborated.

• Structural Engineering and Mechanics
• /
• 제37권3호
• /
• pp.331-349
• /
• 2011

This study investigates the use of a vibration correlation technique (VCT) to identify the buckling load of a rectangular thin plate. It is proposed that the buckling load can be determined experimentally using the natural frequencies of plates under tensile loading. A set of rectangular plates was tested for natural frequencies using an impact test method. Aluminum and stainless steel specimens with CCCC, CCCF and CFCF boundary conditions were included in the experiment. The measured buckling load was determined from the plot of the square of a measured natural frequency versus an in-plane load. The buckling loads from the measured vibration data match the numerical solutions very well. For specimens with well-defined boundary conditions, the average percentage difference between buckling loads from VCT and numerical solutions is -0.18% with a standard deviation of 5.05%. The proposed technique using vibration data in the tensile loading region has proven to be an accurate and reliable method which might be used to identify the buckling load of plates. Unlike other static methods, this correlation approach does not require drawing lines in the pre-buckling and post-buckling regions; thus, bias in data interpretation is avoided.

• 한국구조물진단유지관리공학회 논문집
• /
• 제18권6호
• /
• pp.11-20
• /
• 2014

본 연구는 정현형 주름과 마름모형 주름 형상의 전단좌굴 특성을 비교, 분석하는 것이 목적이다. 이를 위해서 동일한 길이의 마름모꼴 주름과 정현파주름을 해석대상모델로 채택하였으며, 선형좌굴해석을 통한 전단좌굴특성과 이론식에 의한 특성을 분석하였다. 일반적으로 주름강판의 전단좌굴 형태는 국부좌굴, 전체좌굴 및 두 좌굴에 의한 연성좌굴로 분류된다. 그러나 마름모꼴주름과는 달리 정현파주름형상은 평평한 면이 없기 때문에 전단좌굴의 양상에 대한 경향이 달라진다. 특히 국부좌굴과 전체좌굴의 경계에서 나타나는 전단응력변화와 양상은 주름형태에 의해 차이가 난다. 분석 결과에서 볼 때, 제형 (마름모꼴)의 경우는 이론식내의 전체좌굴과 국부좌굴의 경계에서 연성좌굴모드가 발생했다. 그러나 정현파형의 경우 전체좌굴이 발생하는 구간에서 연성좌굴모드가 발생하는 양상을 보였다. 또한 국부좌굴 구간에는 제형형상이 그리고 전체좌굴 구간에서는 정현파형상이 전단좌굴에 저항하는데 유리하게 작용하였다.