• Journal of Radiation Protection and Research
• /
• v.36 no.2
• /
• pp.52-58
• /
• 2011

OSL dating for three hearths having the sequence of use and discard in No. 29 and 29-1 dwelling sites at Sogol cultural site was carried out. Resulting from the deconvolution of natural CW-OSL decay curve and thermal zeroing test, it was turned out that OSL signal was entirely composed of the heat- and light-sensitive fast component with high photoionization cross-section and all quartz OSL signals were thermally bleached under $300^{\circ}C$ which is the minimum temperature related to heating and cooking in Bronze age. After dose recovery test and plateau test, paleodose of each hearth sample was evaluated by using SAR method, and OSL age was determined from the ratio of paleodose to annual dose rate. For the purpose of the precision improvement of OSL age, Bayesian statistics was applied to each hearth's age and the archaeological sequence information. Finally, it could be concluded to the accurate use period of each hearth from the resultant OSL ages.

• Journal of Conservation Science
• /
• v.26 no.4
• /
• pp.417-427
• /
• 2010

This study is to examine the manufacturing technique based on scientific investigation and analysis on Steel-Plated Jewel Beetle's Adornment gilt-bronze openwork remains excavated from No. 100 site at Hwango-dong Gyeongju. As a result of the investigation on the manufacturing revealed that riveting was adopted to connect gilt-bronze openwork plates and steel plates, followed by mercury amalgam plating method and carving of the patterns by means of the dotted line engraving technique. There were some traces on the surface of Jewel Beetle wings that show the use of pins for fixing, which seems to be the result of recycling or processing. The sectional analysis shows the high possibilities that varnishing with lacquer was adopted for wing adhesion, and it was confirmed that varnishing with lacquer was used on the strap pendant plate to prevent corrosion.

• Journal of Conservation Science
• /
• v.36 no.2
• /
• pp.123-142
• /
• 2020

We attempted an experimental study of lost-wax casting to reconstruct the Gilt-bronze pensive Bodhisattva; The main object we aimed to reconstruct was the Korean national treasure No.83, Gilt-bronze pensive Bodhisattva(Maitreya); thus, we scientifically analyzed and measured the alloy ratio and casting method. Initially, the alloy ratio we used during the preliminary experiment was Cu:Sn:Pb = 95.5:4.0:0.5; we then increased tin and lead by 2.5% to consider vaporization during the main experiment. After applying lost-wax casting, we realized that 30% rosin contributed to proper hardness after the wax hardness experiment. The microstructure revealed normal casting character(α-Cu, δ), and the results of the chemical analysis are identical to those of previous studies. The analysis of the mold suggests the presence of quartz powder for structural stability and fire-resistance along with other organic materials whose contribution is still unknown. We expect that our research will serve to provide basic data for advanced studies in the future.

• Conservation Science in Museum
• /
• v.7
• /
• pp.3-10
• /
• 2006

The bronze bowl with lid excavated from Eunnyeongchong Tumulus in Gyeongju had been united in the past and then damaged. We removed deteriorated adhesive and other impurities from it and reunited it. Some fragments of the artifact has been lost; in particular, only half of the whole main body remains. Therefore, it needed restoration treatment for exhibition and conservation. The lid, relatively much part of which remains, was treated with the method that could easily detach the restored part; the main body with much restored part was united using epoxy resin so that the restored part could well bear the weight of the artifact.

• Korean Journal of Heritage: History & Science
• /
• v.46 no.2
• /
• pp.166-185
• /
• 2013

After analyzing the location, arrangement, inner structure, and form of the hunting pit in the Bronze Age, this paper sets up three types and talks about types of hunting pits. After analyzing the types of the hunting pit, three types of hunting pits are derived: mountain district - large group's arrangement - long oval - I II type(A), mountain district - arrangement in a line - oval - I type(B), flat area - arrangement in a line - oval - I III type(C). Literature, the ways in hunting pits, the purpose of the installations, and the characters are studied and compared with those of the anthropological cases. Even though hunting pits of types A and B are constructed to hide and get protein and bone of animals for breeding, there are differences in the ways in hunting and characters. Type of A seems to be constructed only for occupation that is the standardized hunting method on a small works. However, type B is the chasing method to hunt as a group and it has various purposes including main occupation. For example, it is for improving the war skills by practicing the hunting strategies and cooperating with the people. In addition, it is for getting a sacrifice for god. The type C hunting pit is estimated that it plays a role to protect themselves from invasion. It's inferred that there are many purposes for military defense and protection of people or animals within the village. It is the reason why the construction is spread in hunting pit including various purposes in the Bronze age that originates in social and economical specialization like the increase in agricultural productivity and appearance of a chief.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.2
• /
• pp.420-425
• /
• 2010

In the process of warm forging, billet is heated up to $800^{\circ}C$ and located in the upper part of die block impression. The scattered oxidized scale may cause workers burn and shortening of die life sticking to the die block impression. The separating materials sprayed in die block cause harmful dust, harmful mist, fume, and bad odor which contaminate workshop environment. The process is classified as one of the avoided jobs and make the planned output achievement difficult. Development of an elimination device to clear out the contaminating materials in the workshop and improvement of the unsatisfactory maintenance method to fix the abrasion of die block impression which delays the dead line, cost increases needs to be developed. In this research, I tried to solve the problems caused in warm forging of bronze pipe joint such as the billet heating process, die maintenance, and manufacturing cost through improvement of warming forging manufacturing method and die maintenance method and eliminating harmful gas which will make the workshop more environment friendly.

• Korean Journal of Heritage: History & Science
• /
• v.47 no.4
• /
• pp.224-243
• /
• 2014

This study examined the materials and casting technology(cast, alloy, etc.) used in the manufacturing of bronze artifacts based on old literature such as Yongjae Chonghwa, Cheongong Geamul, and The Korea Review. In the casting experiment for restoration of Sangpyong Tongbo, a bronze and brass mother coin mold was made using the sand mold casting method described in The Korea Review. The cast was comprised of the original mold plate frame, wooden frame, and molding sand. Depending on the material of the outer frame, which contains the molding sand, the original mold plate frame can be either a wooden frame or steel frame. For the molding sand, light yellow-colored sand of the Jeonbuk Iri region was used. Next, the composition of the mother alloy used in the restoration of Sangpyong Tongbo was studied. In consideration of the evaporation of tin and lead during actual restoration, the composition of Cu 60%, Zn 30%, and Pb 10% for brass as stated in The Korea Review was modified to Cu 60%, Zn 35%, and Pb 15%. For bronze, based on the composition of Cu 80%, Sn 6%, and Pb 14% used for Haedong Tongbo, the composition was set as Cu 80%, Sn 11%, and Pb 19%. The mother coin mold was restored by first creating a wooden father coin, making a cast from the wooden frame and basic steel frame, alloying, casting, and making a mother coin. Component analysis was conducted on the mother alloy of the restored Sangpyong Tongbo, and its primary and secondary casts. The bronze mother alloy saw a 5% increase in copper and 4% reduction in lead. The brass parent alloy had a 5% increase in copper, but a 4% and 12% decrease in lead and tin respectively. Analysis of the primary and secondary mother coin molds using an energy dispersive spectrometer showed that the bronze mother coin mold had a reduced amount of lead, while the brass mother coin mold had less tin. This can be explained by the evaporation of lead and tin in the melting of the primary mother coin mold. In addition, the ${\alpha}$-phase and lead particles were found in the mother alloy of bronze and brass, as well as the microstructure of the primary and secondary coin molds. Impurities such as Al and Si were observed only in the brass mother coin mold.

• Korean Journal of Heritage: History & Science
• /
• v.39
• /
• pp.243-280
• /
• 2006

At the Bujang-ri Site, Seosan, South Chungcheong Province, around 220 archaeological features, including semi-subterranean houses and pits of Bronze Age and semi-subterranean houses, pits, and burials of Baekje period had been identified and investigated. In Particular, mound burials No. 5 of 13 of Baekje mound burials yielding a gilt-bronze cap along with other valuable artifacts drew international scholarly attention. The gilt-bronze cap from the mound burial No. 5 is a significant archaeological data not only in the study of Baekje archaeology but also in the study of international affairs and exchange at that time. At the time of exposure, the gilt-bronze cap was already broken into a number of pieces and seriously damaged by corrosion, and hardening and urethane foam were necessary in the process of collecting its pieces. Ahead of main conservational treatments on cap, X-ray photograph and CT(computerizes tomography) were taken in order to examine interior structure of the cap and to decide appropriate treatments. In the five layers identified in the profile of cap, a textile layer was set between a metal and a layerof bark of paper birch for avoiding direct contact of the metal and the bark of paper birch. Analyses were executed for examining textile layer and a layer of fibroid material. According to microscopic analysis, while the textile layer consisted of the simplest plain fabric with one fold among three kinds of textile structures, the layer of fibroid material was mixed with two or three kinds of fibers. A comparative analysis with standard sample using FT-IR (Fourier Transform Infrared Spectroscopy) announced that both textiles and fabrics were hemp. Analysis of kind of the paper birch resulted in barks of paper birch with 15 fold. A metallographic microscope, SEM, and WDS were used for the analysis of microscopic structures of plated metal pieces. While amalgam plating was treated as a plating method, the thickness of the plated layer, a barometer of plating technique, was ranged from $1.72{\mu}m$ to $8.67{\mu}m$. The degree of purity of gold (Au) used in plating was 98% in average, and less than 1% of silver (Ag) was included.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09b
• /
• pp.1146-1147
• /
• 2006

Diamond segments were fabricated by cold pressing and sintering under pressure at the temperature up to $750^{\circ}C$. Based on the results of this investigation, it can be concluded that the segments containing 39wt.% cobalt in the matrix material have the highest bending strength at a fracture probability of 50 % due to the weibull distribution method. According to the weibull statistics, it was also determined that the transverse rupture strength was the best for 39 wt.% cobalt ratio in the matrix material for the fracture probability when the other variables are the same.

• Journal of Conservation Science
• /
• v.29 no.3
• /
• pp.223-229
• /
• 2013

It is not known in details for the A.D. period as the archaeomagnetic dating method to be fully facilitated in Korea but it has prepared for the revised shape of standard curve to trace the geomagnetic field variation, and there were cases to increase the survey on relics on the B.C. period to find out for the detailed archaeomagnetic field variation on the Bronze Age to the Early Iron Age. Furthermore, the survey cases on the relics on the Neolithic Age began to emerge a little by little archaeomagnetic field variation of the Neolithic Age through 34 pieces of the archaeomagnetic measurement data as making active advancement around mid-western region. Data is insufficient yet that it is difficult to find out the detailed trend of modification but it is estimated for approximate appearance. The archaeomagnetic field variation of the Neolithic Age made changes without breaking away from the scope of changes in the A.D. period as in the same way with the Bronze Age, and comparing to the variation of archaeomagnetic field for the Bronze Age, the magnetic inclination shifted within the scope of having almost no difference, but the declination is shown to skewed toward the east in its overall appearance. In addition, the comparison was made with the data of the Jomon Age in Japan and the archaeomagnetic measurement data of Korea has a little bit more depth for while the declination is skewed toward the east for 10 degree or more compared to those of Japan. However, in the part where the data is concentrated most intensely, the data for both countries has significant part to overlap to each other that the archaeomagnetic field variation of the Neolithic Age of Korea showed overall similar variation with certain partial changes when compared to those of Japan.