• 제목/요약/키워드: Broad Band

검색결과 648건 처리시간 0.022초

광대역 고조파 제거를 위한 고온초전도 저역통과필터의 제작 (Fabrication of high-temperature superconducting low-pass filter for broad-band harmonic rejection)

  • 한석길;강광용;안달;서준석;최춘근;김상현;곽민환
    • 한국초전도학회:학술대회논문집
    • /
    • 한국초전도학회 2000년도 High Temperature Superconductivity Vol.X
    • /
    • pp.193-196
    • /
    • 2000
  • A new type low-pass filter design method based on a coupled line and transmission line theory is proposed to suppress harmonics by attenuation poles in the stop band. The design formula are derived using the equivalent circuit of a coupled transmission line. The new low-pass filter structure is shown to have attractive properties such as compact size, wide stop band range and low insertion loss. The seventh-order low-pass filter designed by present method has a cutoff frequency of 0.9 CHz with a 0.01 dB ripple level. The coupled line type low-pass filter with strip line configuration was fabricated by using a high-temperature superconducting (HTS : YBa$_2$Cu$_3$O$_{7-{\delta}}$ thin film on MgO(100) substrate. Since the HTS coupled tine type low-pass filter was proposed with five attenuation poles in stop band such as 1.8, 2.5, 4, 5.5, 6.2 GHz. The fabricated low-pass filter has improved the attenuation characteristics up to seven times of the cutoff frequency.

  • PDF

CPFSK communication 사용한 915MHz ISM Band 위한 PLL Frequency Synthesizer 설계 (Design of PLL Frequency Synthesizer for a 915MHz ISM Band wireless transponder using CPFSK communication)

  • 김성훈;조상복
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2007년도 심포지엄 논문집 정보 및 제어부문
    • /
    • pp.286-288
    • /
    • 2007
  • In this paper, the fast locking PLL Frequency Synthesizer with low phase noise in a 0.18um CMOS process is presented. Its main application IS for the 915MHz ISM band wireless transponder upon the CPFSK (Continuous Phase Frequency Shift Keying) modulation scheme. Frequency synthesizer, which in this paper, is designed based on self-biased techniques and is independent with processing technology when damping factor and bandwidth fixed to most important parameters as operating frequency ratio, broad frequency range, and input phase offset cancellation. The proposed frequecy synthesizer, which is fully-integrated and is in 320M $^{\sim}$ 960MHz of the frequency range with 10MHz of frequency resolution. And its is implemented based on integer-N architecture. Its power consumption is 50mW at 1.8V of supply voltage and core area is $540{\mu}m$ ${\times}$ $450{\mu}m$. The measured phase noises are -117.92dBc/Hz at 10MHz offset, with low settling time less than $3.3{\mu}s$.

  • PDF

800MHz 대역용 L형 급전구조를 이용한 U-Slot 광대역 안테나 설계 및 제작 (The Design and Manufactured of U-Slot Broadband Antenna using L-Shaped 800MHz Band)

  • 김갑기
    • 한국항행학회논문지
    • /
    • 제10권4호
    • /
    • pp.342-347
    • /
    • 2006
  • 본 논문에서는 마이크로스트립 안테나의 좁은 대역폭 문제를 개선하여 CDMA대역을 비롯한, GSM, TRS대역을 통합할 수 있는 800MHz대역 광대역 안테나를 설계하고자 한다. L형 급전구조를 갖고 U-slot을 추가하여 이중 공진 효과를 이용하였다. 또한 이득의 개선을 위해 수직으로 적층 하였다. 설계 및 제작된 안테나의 주파수 대역폭(VSWR 2:1)은 789MHz~1086MHz로 297MHz(33%)의 양호한 특성을 보였으며, 또한 E-평면과 H-평면 모두 이득은 9.4dBi 이상, 3dB 빔폭은 $61^{\circ}$이상의 개선된 특성을 보였다.

  • PDF

근접전계 시험 기법을 활용한 Ka-대역 배열안테나 성능 검증 (Performance verification of Ka-Band Array Antenna using Near-Field Test Method)

  • 김영완;권준범;강연덕;박종국
    • 한국인터넷방송통신학회논문지
    • /
    • 제19권4호
    • /
    • pp.105-111
    • /
    • 2019
  • 본 논문에서는 근접전계 시험을 수행하여 Ka 대역 밀리미터파 탐색기용 도파관 광벽 슬롯 배열 안테나의 성능 검증을 수행하였다. 슬롯 배열 안테나의 측정은 원전계, 근접전계 시험을 모두 수행하고 비교하여 밀리미터파 대역의 근접전계 시험의 유효성을 확인하였다. 검증을 수행한 슬롯 배열 안테나의 빔폭 및 부엽 준위를 포함한 빔 패턴 특성이 동일함을 확인하였다. 방위각, 고각 빔패턴의 부엽준위 차이는 1dB 이내로 검증되었다. 추가로 back-projection 기법을 활용하여 근접전계 데이터를 가공한 후 안테나 개구면의 분포를 새롭게 추출하여 배열 안테나 성능 분석을 수행하는 방법에 대하여 소개하였다.

Reverberation Mapping of Nearby AGN with Medium-band and LSGT

  • Kim, Joonho;Im, Myungshin;Choi, Changsu;Hwang, Sungyong
    • 천문학회보
    • /
    • 제45권1호
    • /
    • pp.34.2-34.2
    • /
    • 2020
  • Reverberation mapping is one of the best ways to investigate the physical mechanism of broad-line regions around central supermassive black holes of active galactic nuclei (AGNs). It is usually used to estimate the masses of supermassive black holes. Although spectroscopic reverberation mapping has used to study dozens of AGN, spectroscopic monitoring campaign of large sample is expansive. Here, we present results of photometric reverberation mapping with medium-band photometry. We monitored five nearby AGN which were already studied with H-alpha emission line. Observation has been performed for ~3 months with ~3 days cadence using three medium-band filters installed in LSGT (Lee Sang Gak Telescope; 0.43m). We found 0.01-0.08 magnitude variations from differential photometry. Also time-lags between continuum light-curves and H-alpha emission line light-curves are found using JAVELIN software. The result shows that our study and previous studies are consistent within uncertainty range. In the near future, medium-band photometric reverberation mapping seems useful to study large AGN samples. We will present preliminary result of following study that report new time lag measurement of six AGNs in the similar way.

  • PDF

헬리콥터 탑재 MTD 레이다용 도파관 슬롯배열 안테나 (Waveguide Slot Array Antenna for Heliborne MTD Radar)

  • 김동석;한인희;곽영길;신근섭
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2004년도 하계종합학술대회 논문집(1)
    • /
    • pp.139-142
    • /
    • 2004
  • X-band Waveguide slot way antenna is developed for heliborne MTD radar applications. The antenna is composed of multi-layer waveguide structures. Each of them has it's own functions, such as, radiation, power/phase distribution, coupling, etc. Broad-wall offset slots are used for radiators, inclined slots on broad-wall for power distribution to radiating(branch) waveguide, some kind of coaxial probe structures for in-phase coupling and H-plane T-junction power dividers. Antenna is realized by precision machining and careful assembly. It is tested and measured by 3m${\times}$l.7m planar near-field probe, which is set-up in MTG. Far-field calculations have good agreement in tolerable bounds. Special but necessary process such as brazing, will increase the accuracy and performance. Results show promising possibilities of future applications for real systems.

  • PDF

M-1-1 Cooperative Protocol Based on OSOC-SS to Improve Bandwidth Utilization in USN

  • Kong, Hyung-Yun;Hwang, Yun-Kyeong
    • Journal of electromagnetic engineering and science
    • /
    • 제8권2호
    • /
    • pp.41-46
    • /
    • 2008
  • A bandwidth and power efficient high speed ubiquitous sensor network(USN) for realizing a ubiquitous society is a great challenge for researcher community. In this paper we incorporate a cooperative transmission protocol within a special type of multi-code modulation to meet these requirements. Multi-code(Mc) modulation has been developed for high-speed data transmission over wireless channels. We proposed a new class of orthogonal codes for multi-code modulation which is an orthogonal subset of orthogonal codes(OSOC). Our proposed OSOC structure allows us to use only one relay to cooperate M nodes that effectively reduces the bandwidth and power requirement. This protocol is similar to spread-spectrum(SS) technique that can reduce both broad and narrow band jamming.

Analysis of 60 GHz Band Indor Wireless Channels with Channel Configurations

  • Ji-Hoon Park;Yun
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 1998년도 하계종합학술대회논문집
    • /
    • pp.30-33
    • /
    • 1998
  • In this paper, 60 GHz indoor broadband wireless channels are measured with various configurations in a typical coffice environment. Mesurements are taken at nine positions of the room and the base-station antenna is placed either at the center or at an edge of the measurement room, and the remote-station antenna is either sharp beam or broad beam type. The rms delay spread(RDS) and normalized received power (NRP) are estimated from the measurements. Bit error rate simulations are performed using impulse responses for two measurement positions with QPSK/DQPSK OFDM modulation. Using sharp beam antenna results in superior performances than using broad beam antenna in terms of both bit error rates (BER) and NRP penalty. Also, placing the bese-station antenna at the center is superior to placing it at an edge in terms of BER and NRP.

  • PDF

Ku-대역 소형 도플러 레이다용 수신부 (Receiver for Ku-band Compact Doppler Radar)

  • 이만희;안세환;김윤진;김홍락;정해창;김선호
    • 한국인터넷방송통신학회논문지
    • /
    • 제20권1호
    • /
    • pp.89-93
    • /
    • 2020
  • 본 논문에서는 Ku-대역 소형 도플러 레이다용 수신부를 설계 및 제작하였다. 제작된 수신부는 총 5개의 수신 경로를 갖는 초고주파수신기와 중간주파수신기로 구성된다. 초고주파수신기의 초단에는 송신 누설 신호로부터 보호하기 위한 리미터가 적용되었으며, 최대 입력전력은 2 W이상이 되도록 설계 되었다. 중간주파수신기는 모드 선택 스위치를 통해 광대역 경로와 협대역 경로를 선택할 수 있게 설계하였다. 제안된 수신부는 이득 68 dB, 잡음지수 3.7 dB, 리미터 회복시간 93 ns가 측정되었다. 본 논문에서 제시한 수신부를 이용하여 Ku-대역 소형 도플러 레이다에 바로 적용이 가능할 것으로 예상한다.

다중 공진 광대역 수정된 모노폴안테나 (Modified Monopole Antenna for Multi resonance Wideband)

  • 최태일;범병균;임승우
    • 한국전자통신학회논문지
    • /
    • 제3권2호
    • /
    • pp.53-57
    • /
    • 2008
  • 도파로 급전 방법의 인쇄형 모노폴 구조를 응용하여 UWB대역인 이중 주파수 대역 프린트형 이중 모노폴 안테나를 설계 및 제작하였다. 이중대역을 얻기 위하여 기존의 단일 모노폴 구조를 수정한 이중 모노폴 구조를 제안하였다. 제안된 안테나는 기존의 모노폴 안테나와 동일한 무지향 복사 특성을 가지며 평면으로 구현되어 모노폴 안테나 보다 크기가 작고 높은 이득을 갖는다. 두개의 단일 모노폴은 상호 임피던스 매칭을 위한 스터브로 작용하여 임피던스 매칭이 용이하고 이에 따른 대역폭의 증가를 향상 시킬 수 있었다. 안테나의 대역폭은 VSWR$$\geq_-$$2를 기준하여 350MHz (1.69~2.04[GHz]z])와 2,670MHz (4.33~6[GHz]), 3980MHz (6.1~10.08[GHz])의 결과를 얻었다. 이는 PCS대역(1.75~1.87[GHz]) 과 UWB대역을 충족시킬 수 있다.

  • PDF