• Proceedings of KOSOMES biannual meeting
• /
• 2004.11a
• /
• pp.57-62
• /
• 2004

A mariner feels the ship-handling difficulty when the vessel onboard passes through breakwater. Until now, there is no a layout design of breakwater to take into account the ship-handling difficulty for the mariner. 11Us paper reproduced this situation which ship-handling is difficult by using marine traffic flow simulation, and it applied to Environmental Stress Model as the assessment model which is a quantitative model for evaluating the difficulty of ship-handling arising from restriction in maneuvering water areas and arising from traffic congestion The results are as follows. (1) The layout change of breakwater has little influence for reduction of ship-handling difficulty in the areas of vessel traffic volume. (2) In the situation of same breakwater width, difference of ship speed has an effect on decrease of ship-handling difficulty. (3) Expansion of breakwater width decreases ship-handling difficulty quantitatively.

• Journal of Navigation and Port Research
• /
• v.29 no.3 s.99
• /
• pp.175-180
• /
• 2005

A mariner feels the shiphandling difficulty when the vessel onboard passes through breakwater. Until now, the shiphandling difficulty of the mariner has not been taken into account in the layout of a pair of breakwater. This paper reproduced such a situation that shiphandling is difficult enough by using marine traffic flow simulation, it is assessed by using ES Model which is a quantitative model for evaluating the difficulty of shiphandling arising from maneuvering a ship in the restricted or congested waters. The results are as follows. (1) The change in the layout of a pair of breakwaters has little influence on the shiphandling difficulty. (2) If the width between breakwaters is the same. the speed of a ship affects the shiphandling difficulty. (3) The increase of the width decreases the shiphandling difficulty.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.14 no.1
• /
• pp.76-85
• /
• 2002

The floating breakwater generally has an excellent water exchanging capability, but with some lowering harbor tranquility due to the wave transmission underneath floating body. In the initial stage of design, it is thus required to investigate several alternatives of breakwater layout for their performance of harbor tranquility. The present study aims to formulate a sort of reflection-transmission boundary condition of floating breakwater so that the existing numerical method using time dependent mild slope equation can still be applied to the case of floating breakwaters. The two and three dimensional tests were each performed to demonstrate the performance of the boundary condition. It was found that the reflection and transmission characteristics around the breakwater were well reproduced by the boundary condition. Finally, the reflection-transmission boundary condition were applied to a floating breakwater installed in an imaginary harbor with an irregular shape and bottom topography. The results surely showed that the present numerical method can effectively used in practical works related to the real sea construction of floating breakwaters.

• Journal of the Korea Safety Management & Science
• /
• v.11 no.4
• /
• pp.139-145
• /
• 2009

The present study is to investigate the effect of wave-structure interaction such as wave oscillation. The theoretical method is based upon the linear diffraction theory obtained by the boundary element method. The water depth and incident wave period in fluid region are assumed to be constant. To investigate the wave interaction due to offshore structures, the numerical program has been developed and the simulation has been carried out by varying the conditions of distance and width of offshore structures. This study can effectively be utilized for safety assessment to various breakwater systems and layout of offshore breakwater in the ocean and coastal field. It can give information for the safety to construct offshore structure and revetment in coastal region.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.17 no.4
• /
• pp.232-242
• /
• 2005

In this study, we get an analytical solution for the diffraction and multi-reflection around a semi-infinite breakwater and breakwaters with a gap by using the solution of Penney and Price (1952). We find analytical solutions for single- and multi-reflections around the breakwaters by assuming that the reflected waves are regarded to be those diffracting through a breakwater gap. On the basis of these solutions, it is possible to understand the wave diffraction with different cases of incident wave direction and breakwater layout. These solutions may help harbor engineers to understand the phenomena of diffraction and multi-reflections around the breakwaters. These solutions may also be used to evaluate the applicability of wave transformation models which are used in designing coastal structures.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.32 no.6
• /
• pp.531-552
• /
• 2020

In the previous study, both the wave characteristics at the tip of composite breakwater and on caisson were investigated by applying olaFlow numerical model of three-dimensional regular waves. In this paper, the same numerical model and layout/shape of composite breakwater as applied the previous study under the action of one directional irregular waves were used to analyze two and three-dimensional spatial change of wave force including the impulsive breaking wave pressure applied to trunk of breakwater, the effect of rear region, and the occurrence of diffracted waves at the tip of caisson located on the high crested rubble mound. In addition, the frequency spectrum, mean significant wave height, mean horizontal velocity, and mean turbulent kinetic energy through the numerical analysis were studied. In conclusion, the larger wave pressure occurs at the front wall of caisson around the still water level than the original design conditions when it generates the shock-crushing wave pressure in three-dimensional analysis condition. Which was not occurred by two-dimensional analysis. Furthermore, it was confirmed that the wave pressure distribution at the caisson changes along the length of breakwater when the same significant incident wave was applied to the caisson. Although there is difference in magnitude, but its variation shows the similar tendency with the case of previous study.

• Journal of Navigation and Port Research
• /
• v.32 no.4
• /
• pp.305-313
• /
• 2008

Recently it was known that the problems of nearshore processes and damage of berth and counter facilities frequently had appeared at the small fishery port, such as Daebang near Samcheonpo city, Korea. Here we try to analyze the impact of the rearrangement of counter facilities and berth layout adopted for tranquility of its inner harbor. Because this harbor is being connected to Daebang channel, the rearrangement of the structures might affect to the current speed and direction and wave height, so do to the sea bottom undulation. Therefore, we made model test for the several layouts of the berth and breakwater in this area. Numerical model result shows that the bottom was eroded by 1m by tidal currents and the speed of flow did not shrink, even after the construction work was completed. The direction of the sand movement was downdrift. Although the model study gave reasonable description of beach processes and approach channel sedimentation mechanism, it is necessary to compare with the field history, including the records of waves, tides and bottom materials, etc. for better prediction.

• Journal of Ocean Engineering and Technology
• /
• v.32 no.2
• /
• pp.116-122
• /
• 2018

Dean's equilibrium beach profile formula was used to investigate the correlation between the static shoreline position and the incident wave energy. The effect of the longshore sediment transport was neglected, and the results showed the reasonable agreement compared with the field observations of Yates et al.(2009), which were conducted for almost 5 years on southern California beaches, USA. The shoreline response varies with the scale factor of Dean's equilibrium beach profile. This implies that the shoreline response could be simply estimated using the sampled grain size without laborious long-term field work. Therefore, the present study results are expected to be practically used for the layout design of submerged or exposed detached breakwaters although the further work is required for performance verification. In addition, after laborous mathematical reviews, the linear relation between incident energy and shoreline response, which was obtained from Yates's field study, yielded a clear mathematical equation showing how the beach slope is related to the grain size.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.18 no.1
• /
• pp.1-14
• /
• 2006

This paper presents the techniques developed using the line source method to internally generate waves on an arc in a rectangular grid system. For five different types of wave generation layouts, quantitative experiments were conducted under the following conditions: the propagation of waves on a flat bottom, the refraction and shoaling of waves on a planar slope, and the diffraction of waves to a semi-infinite breakwater. Numerical experiments were conducted using the extended mild-slope equations of Suh et al. (1997). The fifth type of wave generation layout, consisting of two parallel lines connected to a semicircle, showed the best solutions, especially for a small grid size.

• Journal of Navigation and Port Research
• /
• v.27 no.5
• /
• pp.479-486
• /
• 2003

The concept of “Environmental Stress(ES)” can be used as a useful index when assessing the maritime traffic safety. It is composed of two parts, one due to geographical restriction and another one due to traffic congestion. In this paper, Environmental Stress due to geographical restriction is reviewed Its characteristics are surveyed from the sample calculation results for some hypothetical cases, such as approaching a breakwater, navigating in a long straight channel, and in a long bended channel. Sample calculations are also carried out for the approach channels in Busan and Kwangyang harbor. By using this ES concept, it is expected that objective ana quantitative assessment of safety is possible for various environmental conditions when navigating in a harbor or in a fairway.