• Journal of the Korean institute of surface engineering
• /
• v.29 no.6
• /
• pp.809-815
• /
• 1996

$Y_2O_3$-based metal-insulator-semiconductor (MIS) structure on p-Si(100) has been studied. Films were prepared by UHV reactive ionized cluster beam deposition (r-ICBD) system. The base pressure of the system was about $1 \times 10^{-9}$ -9/ Torr and the process pressure $2 \times 10^{-5}$ Torr in oxygen ambience. Glancing X-ray diffraction(GXRD) and in-situ reflection high energy electron diffracton(RHEED) analyses were performed to investigate the crystallinity of the films. The results show phase change from amorphous state to crystalline one with increasingqr acceleration voltage and substrate temperature. It is also found that the phase transformation from $Y_2O_3$(111)//Si(100) to $Y_2O_3$(110)//Si(100) in growing directions takes place between $500^{\circ}C$ and $700^{\circ}C$. Especially as acceleration voltage is increased, preferentially oriented crystallinity was increased. Finally under the condition of above substrate temperature $700^{\circ}C$ and acceleration voltage 5kV, the $Y_2O_3$films are found to be grown epitaxially in direction of $Y_2O_3$(1l0)//Si(100) by observation of transmission electron microscope(TEM). Capacitance-voltage and current-voltage measurements were conducted to characterize Al/$Y_2O_3$/Si MIS structure with varying acceleration voltage and substrate temperature. Deposited $Y_2O_3$ films of thickness of nearly 300$\AA$ show that the breakdown field increases to 7~8MV /cm at the same conditon of epitaxial growing. These results also coincide with XPS spectra which indicate better stoichiometric characteristic in the condition of better crystalline one. After oxidation the breakdown field increases to 13MV /cm because the MIS structure contains interface silicon oxide of about 30$\AA$. In this case the dielectric constant of only $Y_2O_3$ layer is found to be $\in$15.6. These results have demonstrated the potential of using yttrium oxide for future VLSI/ULSI gate insulator applications.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.37 no.3
• /
• pp.332-336
• /
• 2024

High-energy bandgap material silicon carbide (SiC) is gaining attention as a next-generation power semiconductor material, and in particular, SiC-based MOSFETs are developed as representative power semiconductors to increase the breakdown voltage (BV) of conventional planar structures. However, as the size of SJ (Super Junction) MOSFET devices decreases and the depth of pillars increases, it becomes challenging to uniformly form the doping concentration of pillars. Therefore, a structure with different doping concentrations segmented within the pillar is being researched. Using Silvaco TCAD simulation, a SJ VVD (vertical variation doping profile) MOSFET with three different doping concentrations in the pillar was studied. Simulations were conducted for the width of the pillar and the doping concentration of N-epi, revealing that as the width of the pillar increases, the depletion region widens, leading to an increase in on-specific resistance (R_on,sp) and breakdown voltage (BV). Additionally, as the doping concentration of N-epi increases, the number of carriers increases, and the depletion region narrows, resulting in a decrease in R_on,sp and BV. The optimized SJ VVD MOSFET exhibits a very high figure of merit (BFOM) of 13,400 KW/cm², indicating excellent performance characteristics and suggesting its potential as a next-generation highperformance power device suitable for practical applications.

• Journal of Animal Science and Technology
• /
• v.47 no.3
• /
• pp.379-390
• /
• 2005

Effects of dietary brown seaweed product levels on performance and metabolism of protein and energy were investigated in broiler chicks that were activated the acute phase response. One day old chicks were fed diets containing either 0.0(basal), 1.0, 2.0 or 4.0 % brown seaweed products for 3 weeks. The acute phase response was activated by injecting i.p. the Salmonella typhimurium lipopolysacharide(LPS) at $2^{nd}$ week of age. The acute phase response lowered nitrogen balance(NB)/ $kg^{0.75}$ (metabolic body size) and highered dietary ME values in birds fed diets containing brown seaweed product. Increase in dietary brown seaweed products levels lowered daily gain, and NB, uric acid nitrogen(UAN) excretion and ME utilization per $kg^{0.75}$ in chicks with the acute phase response. But the dietary brown seaweed product level did not affect the performance of 3 Week old broiler chicks that experienced the acute phase response. And the brown seaweed products 1.0 and 2.0 % diets lessened the feed intake reduction caused by the acute phase response in broiler chicks. The brown seaweed 2.0% diet increased NB / g diet or $kg^{0.75}$ and decreased the excretion of UAN/g diet or $kg^{0.75}$. This result indicated that the brown seaweed was able to interact with the acute phase response and increased protein retention via decreased breakdown of protein in birds fed brown seaweed 2.0% diet.

• The Korean Journal of Quaternary Research
• /
• v.13 no.1
• /
• pp.67-78
• /
• 1999

In present, the terminal area of the Nagdong River Delta consists of micro-depositional landforms with sand barrier islands, sand bars and tidal flats which are arranged parallel to the present shoreline, and have rapidly shifted toward sea during last 100 years due to human activities such as construction of estuary dam, industrial complex and residential area. To clarify the landform changes of the area, the author traced the morphologic change pattern based on interpretation of air-photos, topographic maps and old Korean traditional map, and the results are as follows ; Based on the Daedongyeojido, one of the old Korean map, published in 1861, the area including upper part of the delta was underlying by sea level except two larger sand barriers, which means the Nagdong River Delta was not completely formed as the present outline of morphology by 1860s. According to the topographic map(1 :50,000) of 1916, the delta resembled to the present morphology pattern was exposed in 1916, and at this time the area was mainly composed of one sand barrier island, four sand bars and tidal flats, which had slowly elongated southwards before construction of the Nagdong River Estuary Dam in 1987. But after 1987, the area has been rapidly and drastically shifted southwards in arrange with one chain of sand barrier islands (Elsugdo -Myeonghodo-Sinhodo ) and four chains of sand bars (first chain ; Jinwoodo -Daemadeung-Maenggeummeorideung, second chain : Jangjado-Baeghabdeung, third chain ; Saedeung-Namusitdeung, fourth : Doyodeung-Dadaedeung) parallel to shoreline. This rapid landform change of the area is now occurring, and is seemed to ascribed firstly, to the construction of the Nagdong River Estuary Dam on Elsugdo in 1987, the Sinho Industrial Complex on Sinhodo and Myeongji Residential Area on Myeonghodo in 1992, secondly, to artificial alteration of drainage channel and consequential breakdown of former energy system between riverflow and tidal-and wave-energy. From these facts, it is inferred that the landform change pattern of the area will continue until a new equilibrium between the factor available to this energy system is accomplished.

• Composites Research
• /
• v.32 no.6
• /
• pp.301-306
• /
• 2019

Triboelectric nanogenerator (TENG) is one of the energy harvesting methods in spotlight that can convert mechanical energy into electricity. As TENGs produce high electrical output, previous studies have shown TENGs that can power small electronics independently. However, recent studies have reported limitations of TENG due to air breakdown and field emission. In this study, we developed a triboelectric nanogenerator that utilizes the metal-to-metal surface contact to induce ion-enhanced field emission and electron avalanche for electrons to flow directly between two electrodes. The average peak open-circuit voltage of this TENG was measured as 340 V, and average peak closed-circuit current was measured as 10 mA. The electrical output of this TENG has shown different value depending on the surface charge of surface charge generation layer. The TENG developed in this study have produced RMS power of 0.9 mW, which is 2.4 times higher compared to conventional TENGs. The TENG developed in this study can be utilized in charging batteries and capacitors to power portable electronics and sensors independently.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.17-18
• /
• 2011

Plasma in liquid phase has attracted great attention in the last few years by the wide domain of applications in material processing, decomposition of organic and inorganic chemical compounds and sterilization of water. The plasma in liquid is characterized by three main regions which interact each - other during the plasma operation: the liquid phase, which supply the plasma gas phase with various chemical compounds and ions, the plasma in the gas phase at atmospheric pressure and the interface between these two regions. The most complex region, but extremely interesting from the fundamental, chemical and physical processes which occur here, is the boundary between the liquid phase and the plasma gas phase. In our laboratory, plasma in liquid which behaves as a glow discharge type, is generated by using a bipolar pulsed power supply, with variable pulse width, in the range of 0.5~10 ${\mu}s$ and 10 to 30 kHz repetition rate. Plasma in water and other different solutions was characterized by electrical and optical measurements. Strong emissions of OH and H radicals dominate the optical spectra. Generally water with 500 ${\mu}S/cm$ conductivity has a breakdown voltage around 2 kV, depending on the pulse width and the repetition rate of the power supply. The characteristics of the plasma initiated in ultrapure water between pairs of different materials used for electrodes (W and Ta) were investigated by the time-resolved optical emission and the broad-band absorption spectroscopy. The deexcitation processes of the reactive species formed in the water plasma depend on the electrode material, but have been independent on the polarity of the applied voltage pulses. Recently, Coherent anti-Stokes Raman Spectroscopy method was employed to investigate the chemistry in the liquid phase and at the interface between the gas and the liquid phases of the solution plasma system. The use of the solution plasma allows rapid fabrication of the metal nanoparticles without being necessary the addition of different reducing agents, because plasma in the liquid phase provides a reaction field with a highly excited energy radicals. We successfully synthesized gold nanoparticles using a glow discharge in aqueous solution. Nanoparticles with an average size of less than 10 nm were obtained using chlorauric acid solutions as the metal source. Carbon/Pt hybrid nanostructures have been obtained by treating carbon balls, synthesized in a CVD chamber, with hexachloro- platinum acid in a solution plasma system. The solution plasma was successfully used to remove the template remained after the mesoporous silica synthesis. Surface functionalization of the carbon structures and the silica surface with different chemical groups and nanoparticles, was also performed by processing these materials in the liquid plasma.

• Journal of the Mineralogical Society of Korea
• /
• v.18 no.3 s.45
• /
• pp.195-204
• /
• 2005

Interlayered structures of talc and chlorite in the talc deposits of the Yugu area are studied using transmission electron microscope. Packets of chlorite-like layer in talcs or packets of talc-like layer in chlorites are commonly observed. Randomly interlayered features of talc and chlorite are locally observed in some specimens. Reactions observed in the present study include the addition or removal of a brucite-like layer in the interlayer region of the talc or chlorite resulting in the , transformation between a talc and a chlorite layers and breakdown or formation of a talc-like layer resulting in transformation between two talc layer and one chlorite layer. Both reactions are accompanied by a significant change in volume. In addition to these mechanisms, there are two volume conserving mechanisms; the combination of both mechanisms and mutual transformation in a complex manner. Reactions from 2 chlorite layers to 3 talc layers, from 2 chlorite layers + 1 talc layers to 1 chlorite layers + 3 talc layers, and from 3 chlorite layers to 5 talc layers are observed among the complex type mechanisms.

• Korean Journal of Materials Research
• /
• v.15 no.4
• /
• pp.257-262
• /
• 2005

Nano-sized ZrVFe alloy powders were prepared by the ablation of powder compact in alcobol using a Nd-YAG pulsed Laser. The $Zr_{57}V_{35.}8Fe_{7.2}$ alloy commercially designated as ST707 has long been known as the ideal solution for various vacuum applications. The target for the ablation was sintered pellets of $Zr_{57}V_{35.}8Fe_{7.2}$ alloy powder. The alloy was prepared by arc melting and Hydride-DeHydride method. The ablated powders were mostly circular having fairly large size distribution smaller than 200 nm in all cases. The X-ray diffraction study revealed that the ablated alloy retained the crystal structure of the target alloy. Nevertheless, Fe and V contents in the ablated powder were lower than those in the target alloy. This was believed to result from the high vapour pressures of Fe and V compared to that of Zr. The size of the powders ablated at high energy fluence tends to decrease due at least partly to the breakdown of previously made ones.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.25 no.12
• /
• pp.961-968
• /
• 2012

In this study, we have investigated the effects of Mn and Co co-doping on defects, J-E curves and grain boundary characteristics of ZnO-$Bi_2O_3$ (ZB) varistor. Admittance spectra and dielectric functions show two bulk defects of $Zn_i^{{\cdot}{\cdot}}$ (0.17~0.18 eV) and $V_o^{\cdot}$ (0.30~0.33 eV). From J-E characteristics the nonlinear coefficient (${\alpha}$) and resistivity (${\rho}_{gb}$) of pre-breakdown region decreased as 30 to 24 and 5.1 to 0.08 $G{\Omega}cm$ with sintering temperature, respectively. The double Schottky barrier of grain boundaries in ZB(MCo) ($ZnO-Bi_2O_3-Mn_3O_4-Co_3O_4$) could be electrochemically single type. However, its thermal stability was slightly disturbed by ambient oxygen because the apparent activation energy of grain boundaries was changed from 0.64 eV at lower temperature to 1.06 eV at higher temperature. It was revealed that a co-doping of Mn and Co in ZB reduced the heterogeneity of the barrier in grain boundaries and stabilized the barrier against an ambient temperature (${\alpha}$-factor= 0.136).

• Journal of Periodontal and Implant Science
• /
• v.29 no.1
• /
• pp.41-49
• /
• 1999

The purpose of this study was to evaluate the relationship between osteoporosis and periodontal condition in postmenopausal women. Twenty-eight patients who have been treated at Chonnam national university hospital with osteoporosis(osteoporotic group, mean $age62.2{\pm}6.6$) and 21 normal postmenopausal women with periodontitis(control group, mean $age60.4{\pm}3.7$) were examined. Bone mineral density(BMD) of lumbar spine(L2-L4) was measured by dual energy X-ray absorptiomemtry(DEXA). Percentage to peaked bone mass in osteoporotic group was 70.9% which had lower BMD than in control group(p<0.05). The number of present teeth were 23.6 in osteoporotic group and 23.1 in control group. Percentage of bleeding on probing was 41% in osteoporotic group and 37% in control group. probing depth and attachment level were shown 3.18 mm, 3.63 mm in osteoporotic group and 2.85mm, 3.11mm in control group, respectively. Probing depth and attachment level were significantly greater in osteoporotic group than in control group(p<0.05). The significant negative correlation was found between BMD level and periodontal attachment level(p<0.001, ${\gamma}=-0.56$). These results suggest that osteoporosis may be associated with periodontal breakdown.