• Asia-Pacific Journal of Business
• /
• v.12 no.1
• /
• pp.151-163
• /
• 2021

Purpose - The break-even point refers to the point where total profit and total cost coincide, and from this point on, the entrepreneur's decision-making takes a different route. Strategic decisions can be made for more efficient operation and eventually for more likelihood for growth and sustainability if a startup figures out when it recoups the investment and switches to a net profit. Design/methodology/approach - 748 creativity and skill-based sole proprietors in manufacturing industry were examined to demonstrate the effect of the entrepreneur's entrepreneurial experience and education level, the business launch preparation time, or the self-financing on the achievement of break-even point. Findings - While the business launch preparation time lowered the likelihood of reaching a break-even point, self-financing increased the likelihood. As a result of further analysis by subdividing into subgroups according to skill level, only the business launch preparation time was statistically significant in the highly skilled industries. In the low skilled industries, in addition to the business launch preparation time, the CEO's education level and the self-financing were statistically significant. Research implications or Originality - The longer the business launch preparation time, the higher the start-up cost, which increases the burden of initial cost recovery, and the agile response to market changes is thereby delayed, resulting in the business idea losing its appeal. Self-financing not only provides stability and strong motivation for the business operation but also promotes careful spending which contributes to the achievement of break-even point. In particular, it is found that practical experience is more useful than theoretical knowledge in low skilled industries. Due to the limitation of secondary data based on the recollection, the time required to reach a break-even point, percentage of financing sources, etc. may include cognitive errors. In addition, variables are not included that explain the characteristics of creativity and skill-based sole proprietorship, so it is necessary to exercise caution with the actual application.

• Korea-Australia Rheology Journal
• /
• v.20 no.3
• /
• pp.109-116
• /
• 2008

The effect of intermolecular aggregation induced by hydrophobic and electrostatic interactions on shear and elongational flow properties of aqueous acrylic thickener solutions is discussed. Complex shear modulus is determined at frequencies up to $10^4$ rad/s employing oscillatory squeeze flow. Extensional flow behavior is characterized using Capillary Break-up Extensional Rheometry. Aqueous solutions of poly(acrylic acid)(PAA)/poly(vinylpyrrolidone-co-vinylimidazole) (PVP-VI) mixtures exhibit unusual rheological properties described here for the first time. Zero-shear viscosity of the mixtures increases with decreasing pH and can exceed that of the pure polymers in solution by more than two orders of magnitude. This is attributed to the formation of complexes induced by electrostatic interactions in the pH range, where both polymers are oppositely charged. PAA/PVP-VI mixtures are compared to the commercial thickener Sterocoll FD (BASF SE), which is a statistical co-polymer including (meth) acrylic acid and ethylacrylate (EA) forming aggregates in solution due to "sticky" contacts among hydrophobic EA-sequences. PAA/PVP-VI complexes are less compact and more deformable than the hydrophobic Sterocoll FD aggregates. Solutions of PAA/PVP-VI exhibit a higher zero-shear viscosity even at lower molecular weight of the aggregates, but are strongly shear-thinning in contrast to the weakly shear-thinning solutions of Sterocoll FD. The higher ratio of characteristic relaxation times in shear and elongation determined for PAA/PVP-VI compared to Sterocoll FD solutions reflects, that the charge-induced complexes provide a much stronger resistance to extensional flow than the aggregates formed by hydrophobic interactions. This is most likely due to a break-up of the latter in extensional flow, while there is no evidence for a break-up of complexes for PAA/PVP-VI mixtures. These flexible aggregates are more suitable for the stabilization of thin filaments in extensional flows.

• Journal of Korean Ophthalmic Optics Society
• /
• v.17 no.3
• /
• pp.279-284
• /
• 2012

Purpose: We measured the amplitude of accommodation using the push-up and push-away tests and near point of convergence (NPC) and investigated the accommodative insufficiency (AI) and convergence insufficiency (CI) in elementary school children of 12~13 years old. Methods: 88 students who aged 12~13 $12.63{\pm}0.51$ years old with more than 1.0 spectacle best corrected visual acuity were examined using push-up and push-away tests. The break and recovery points of NPC also were measured. Results: Mean amplitudes of accommodations using push-up and push-away tests were $11.52{\pm}2.50D$ and $10.06{\pm}1.97D$, respectively in right eye (P<0.001). Mean break and recovery points in NPC were $8.66{\pm}1.99cm$ and $10.98{\pm}2.06cm$. AI and CI showed 28.75% and 30.00% each. 48.75% was within normal range in both amplitudes of accommodations according to their age expected and convergence. Students having both AI and CI were 7.50%. Conclusions: A high correlation between the push-up test and push-away test was found in elementary school children (r=0.6025; P<0.05). Students having normal amplitude of accommodation by their age expected and normal convergence were 71.25% and 70.00%, respectively.

• Journal of the Korean Society of Safety
• /
• v.31 no.4
• /
• pp.143-149
• /
• 2016

In this study, a series of numerical simulation of dam break flow was conducted using EFDC model, and input conditions including cell size, time step, and turbulent eddy viscosity were considered to analyze parameter sensitivity. In case of coarse mesh layout, the propagated length of the shock wave front was ${\Delta}_x$ longer than that of other mesh layouts, and the velocity results showed jagged edge, which can be cured by applying fine grid mesh. Turbulent eddy viscosity influenced magnitude of the maximum velocity passing through gate up to 20% and the cell Peclet number less than 2.0 ensured no numerical oscillations.

• Journal of the Korean Society of Industry Convergence
• /
• v.9 no.1
• /
• pp.73-78
• /
• 2006

Constructing a long, linear structure such as a high-way may cause the break-up of the natural ecology by cutting off the trails of animals. We could observe 12 kinds of mammals, 49 kinds of birds and 10 kinds of amphibia and reptilia at the research area. With this research, we were so sure of the necessity of building ecological corridors to prevent the ecological break-up of wild animals that we studied the building and maintaining of 3 types of ecological corridors; tunnel types, over-bridge type and line type.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.18 no.5
• /
• pp.566-573
• /
• 2015

The most important factor for the penetration performance of shaped charge is the liner design. By designing the liner to have properties of both high jet tip velocity and long jet break-up time, the better penetration performance could be acquired. Usually it is very difficult to satisfy above two conditions simultaneously. In this study, the liner with the shape of ogive was developed to have relatively larger jet mass compared to the conventional trumpet liner. The designed shaped charge showed jet properties with high jet tip velocity and long jet break-up time by using ogive liner and wave shaper. A commercially available hydro-dynamic code AUTODYN-2D was used for numerical analysis of jet formation. The flash X-ray test and the static penetration test were conducted to verify the results of numerical analysis.

• Journal of the Korean Mathematical Society
• /
• v.39 no.4
• /
• pp.543-558
• /
• 2002

We investigate the fragmentation process developed by Kolmogorov and Filippov, which has been studied extensively by many physicists (independently for some time). One of the most interesting phenomena is the shattering (or disintegration of mass) transition which is considered a counterpart of the well known gelation phenomenon in the coagulation process. Though no masses are subtracted from the system during the break-up process, the total mass decreases in finite time. The occurrence of shattering transition is explained as due to the decomposition of the mass into an infinite number of particles of zero mass. It is known only that shattering phenomena occur for some special types of break-up rates. In this paper, by considering the n-particle system of stochastic fragmentation processes, we find general conditions of the rates which guarantee the occurrence of the shattering transition.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2015.07a
• /
• pp.486-488
• /
• 2015

FSC(Field Sequential Color) LCD has high efficiency, high brightness and color saturation due to 3 times aperture larger than conventional LCD. However it is well known that color break-up (CBU) and color interference are hot issue need to be solved. We propose a novel sequential driving method with edge-lit light guide composed of $16{\times}15$ blocks to reduce CBU and color interference. The experimental results show not only suppression of CBU but also the side effects are minimized.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.25 no.11
• /
• pp.1552-1560
• /
• 2001

This paper presents the experimental results of a study undertaken to develop an electrostatic spray system for a combustion application. The characteristics of the liquid atomization and the droplet dispersion in the electrostatic spray of twin fluids were investigated by the optical measurement techniques. The processes associated with the break-up of charged jets were also observed using the laser sheet visualization. The diameter and velocity of droplets were simultaneously measured using the phase Doppler measurement technique. The electrostatic atomization of the liquid fuel depended primarily on the charging voltage and the flow rate, but the dispersion of droplets depended significantly on the aerodynamic flow. Aerodynamic influences on the liquid atomization decreased with an increase of the charging voltage. Consequently, the liquid atomization and the droplet dispersion could be independently controlled using the electrostatic and aerodynamic mechanisms.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.11a
• /
• pp.538-541
• /
• 1996

The flow of the molten drop in the GMAW was observed to explain the mechanism of its formation and break-up process. Fluid flew analysis was made with the assumption that the electrode wire acts like fluid, and it is shown how the convection of the drop inside affects its flow, from the formation to the break-up of the drop. In later part, the process of the spray mode development at high current is shown, as well as the one of the globular mode, by the fluid flow analysis.