• 대한수학회지
• /
• 제48권4호
• /
• pp.849-866
• /
• 2011

In this paper, we give the differential equations characterizing the timelike and spacelike curves of constant breadth in Minkowski 3-space $E^3_1$. Furthermore, we give a criterion for a timelike or spacelike curve to be the curve of constant breadth in $E^3_1$. As an example, the obtained results are applied to the case $\rho$ = const. and $k_2$ = const., and are discussed.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.258-260
• /
• 2007

Nowadays the automotive circuit design becomes more complicated a practical modern car circuit usually contains thousands of wires. So the error connection between connector and pins becomes more difficult to be located. This paper proposes a general way to locate all error wires in an automotive circuit design. Firstly, we give an exact definition of error wire to guide our job. This definition also composes the core part of our algorithm. Then we limit the area of the error wires by several steps. During these steps, we apply breadth-first search method to step over all wires under consideration of reducing time cost. In addition, we apply bidirectional stack technique to organize the data structure for algorithm optimization. This algorithm can get a result with all error wires and doubtful wires in a very efficient way. The analysis of this algorithm shows that the complexity is linear. We also discuss some possible improvement of this algorithm.

• 복식문화연구
• /
• 제8권1호
• /
• pp.133-144
• /
• 2000

The purpose of this study was to classify women's face types by visual distinction and to analyze the measurement of face types. A survey was conducted by subjects of 167 women's college students in Kwangju City and Chonnam area. Data were analyzed by Frequencies, Mean, one way ANOVA and Ducan's Multiple Range Test. The major results were as followed ; ·Women's face types were classified by 7 types and there were oblong shape(28.3%), egg shape(25.7%), round shape(23.9%), square shape(12.4%), inverted triangle shape(5.3%), diamond shape(3.5%), triangle shape(0.8%) in the subjects. ·From the measurements of the women's face, index of face length to face breadth was 1.38, it means that the index was different from the other refferences. And the lower face length was longer than the upper and the middle face lengths. ·Differences From those measurements like forehead breadth, face length/bizigion breath(p〈.001), bizigion breadth, bignathion slopper, stature(p〈.01) and trichion breadth, tragion-menton length(p〈.05) were significant in the classified face types.

• 호남수학학술지
• /
• 제19권1호
• /
• pp.107-116
• /
• 1997

In this paper, we get some properties of curves of constant relative breadth in the Minkowski plane.

• 한국의류학회지
• /
• 제31권7호
• /
• pp.1008-1019
• /
• 2007

The purpose of this study was to develop an appropriate jacket pattern for elderly women over sixty years old, providing a good fit and appearance. Results were as follows: The length of the jacket was made long enough to cover the area 22.0cm below the waistline. The waist back length was made 1.7cm longer than the actual size of the waist back length. The armhole length was made 0.5cm longer than B/4, enhacing the appearance and functionality while allowing freer movement of the arms. As for the front and back interscye breadths, the front interscye breadth was made 1.7cm larger than the actual size while the back interscye breadth was only 1.0cm larger, providing the front interscye breadth more space. The bust breadth was made 10.0cm larger than the bust circumference measure(B/4+2.5cm), the waist breadth was made 6.0cm larger than the waist circumference measure(W/4+1.5cm), The hip breadth was made 12.0cm larger than the him circumference measure(H/4+3.0cm). The sleeve length was made 3.0cm larger than the arm length measure, as the sleeve length of a jacket is usually long enough to cover the ulnar styloid. The sleeve width was made 5.0cm larger than the upper arm circumference measure, as the upper arm circumference measure of the model pattern was too large than necessary, worsening the overall appearance. The sleeve cap height was set at AH/4+4.7cm. The wrist circumference of 27.0cm was set, allowing 2/3 and 1/3 for the large sleeve and small sleeve respectively.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 춘계학술대회 논문집
• /
• pp.1231-1232
• /
• 2010

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2009년도 추계학술대회 논문집
• /
• pp.127-128
• /
• 2009

• 대한교통학회지
• /
• 제27권3호
• /
• pp.39-47
• /
• 2009

교통안전시설 실무편람에 의하면 현재 U-Turn 설치 가능한 지점으로 최소폭원을 '편도 폭 9m 이상'의 지점으로 하고 있으며, U-Turn 허용차량은 승용차로 제한하는 것을 원칙으로 하도록 규정하고 있다. 그러나 최근 대형화된 승용차와 보편화된 SUV(sports utility vehicle)차량이 한번에 U-Turn을 완료하지 못하면서 교통소통과 교통안전에 문제를 야기시키고 있다. 본 연구에서는 실제 차량을 이용한 U-turn 회전반경의 실차 조사치와 교통사고 재현 프로그램인 PC-Crash에 의한 예측치를 비교 검정한 후 PC-Crash를 이용하여 국내 승용차에 대해 U-turn 회전반경에 대해서 예측하고 U-Turn 설치를 위한 적정 폭원으로 제시하였다.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제6권2호
• /
• pp.139-143
• /
• 2003

Mathematical constants for multiplication with leaf length (I) or breadth (b) or l ${\times}$ b have been worked out for determining leaf area in promising mulberry genotypes viz., Chinese White, S-146, Chak Majra and Sujanpur Local of sub-tropical India. When pooled, the mathematical constants worked out were 8.1132, 10.1019 and 0.5992 for multiplication with leaf length, breadth and l ${\times}$ b, respectively, for genotypes bearing un-lobbed leaves and 6.9447, 8.2761 and 0.5009 for multiplication with leaf length, breadth and l ${\times}$ b, respectively for genotypes bearing lobbed leaves. Leaf area can be worked out by using any constant by multiplying either with leaf length or breadth or both (l ${\times}$ b). Estimated leaf areas worked out were found significantly and positively correlated with actual leaf area (r＝999$^{＊＊}$). The suggested present non-destructive method by using mathematical constants is very quick and alternative to electronic leaf area meter for spot leaf area determination in mulberry which is the only food source for mulberry silkworm in sericulture industry.

• 지식경영연구
• /
• 제9권3호
• /
• pp.77-105
• /
• 2008

This study primarily aims at identifying what factors significantly affect the diffusion of knowledge management systems(KMS) and finding out how these identified factors can be effectively managed, especially for Korean companies. The research model is derived based on previous researches on innovation diffusion, information systems implementation, and KMS. The model is used to examine the role of determinants in influencing the extent to which KMS is diffused within organizations. Independent variables of this research are composed of technical characteristics, organizational characteristics and environmental characteristics. 'Breadth of diffusion' and 'depth of diffusion' concept are used to measure the extent of KMS diffusion which is the dependent variable of this model. The 101 companies of total 1,000 samples responded to the survey. To analyze tile results of this empirical study, we performed the multiple regression analysis. As a result, it was shown that the relative advantage, complexity, information system maturity, size, top management support, champion, competitive pressure have influences on both the breadth and the depth diffusions. On the other hand, the organizational culture, valuation and compensation, and uncertainty of environmental factors were not verified to be significant. This empirical study will provide Korean companies with insights into effective ways to diffuse the KMS and succeed in business competition.