• Journal of Electrical Engineering and Technology
• /
• 제6권2호
• /
• pp.147-153
• /
• 2011

This paper proposes a methodology using a tool based on the branch-parameter continuation power flow (BCPF) in order to restore the power flow solvability in unsolvable contingencies. A specified contingency from a set of transmission line contingencies is modeled, considering the transient analysis and practice in the Korean power system. This tool traces a solution path that satisfies the power flow equations with respect to the variation of the branch parameter. At a critical point, in which the branch parameter can move on to a maximum value, a sensitivity analysis with a normal vector is performed to identify the most effective compensation. With the sensitivity information, the location of the reactive power compensation is determined and the effectiveness of the sensitivity information is verified to restore the solvability. In the simulation, the proposed framework is then applied to the Korean power system.

• Journal of international Conference on Electrical Machines and Systems
• /
• 제2권1호
• /
• pp.57-64
• /
• 2013

The functional characteristic of LISN circuit, which is used for measurements of conductive noise in mains power line, is basically related to frequency characteristics of passive elements like inductors used in the circuit as well as the frequency response of inductors is highly related to the resins used in the varnishing process. The significant problem in determination of an inductor's frequency characteristic is the intrinsic resistance, inductance and parasitic capacitance. In this triplet, the parasitic capacitance is the major limiting factor of inductor's frequency range. This capacitance depends on inductor design parameters and materials filling the spaces of coil like resin and its coherency after curing process. In this paper, two similar inductors were designed and built. The first inductor was not varnished while the second one was varnished with VPI technology. VPI, or Vacuum, Pressure, Impregnation technology is one of the most reliable methods performing good insulating conditions for electrical circuits and windings based on resins. The measured results show that implying varnishing technology does not significantly affect the frequency response. However, due to mechanical solidity aspects and improved environmental protection, it is better to varnish the inductors.

• Nuclear Engineering and Technology
• /
• 제36권2호
• /
• pp.142-152
• /
• 2004

The liquid entrainment and vapor pull-through offtake model of RELAP5/MOD3 had been developed for SBLOCA (Small Break Loss of Coolant Accident). The RELAP5/MOD3 model for horizontal volumes accounts for the phase separation phenomena and computes the flux of mass and energy through a branch when stratified conditions occur in the horizontal pipe. In the case of CANDU reactor, this model should be used in the coolant flow of 95 feeders connected to the reactor header component under the horizontal stratification in header. The current RELAP5 model can treat the only 3 directions junctions; vertical upward, downward, and side oriented junctions, and thus improvements for the liquid entrainment and vapor pull-through model were needed for considering the exact angles. The RELAP5 off-take model was modified and generalized by considering the geometric effect of branching angles. Based on the previous experimental results, the critical height correlation was reconstructed by use of the branch line connection angle and validation analyses were also performed using SET. The new model can be applied to vertical upward, downward and angled branch, and the accuracy of the new correlations is more improved than that of RELAP5.

• 대한안전경영과학회지
• /
• 제26권1호
• /
• pp.9-14
• /
• 2024

Restraints of Branch Lines are used as earthquake-resistant support devices for fire-fighting pipes along with sway brace devices. The central types are aligned and fixed in a straight line with center of the pipe, but the eccentric types are fixed to on side of the pipe, so a bending moment occurs. In this study, three specimens each of central type and eccentric type were installed at an angle of 45° from the vertical and a monotonic compression load of 1340N was applied. All central type samples satisfied 17.8mm of the allowable displacement, but all eccentric type samples failed to meet the target load and buckled. Therefore, when considering the performance of eccentric type restraints, both compressive load and bending moment must be considered. Even through material mechanics calculations, the yield stress of eccentric type - 3/8 inch all threaded steel bolt - exceeds 320Mpa of the allowable stress. A experiment standards need to be established for eccentric type restraints.

• 한국멀티미디어학회논문지
• /
• 제8권1호
• /
• pp.27-33
• /
• 2005

골격선 추출에 대한 향상된 디지털 이미지를 획득하기 위해서 효과적인 골격화 방법을 제안한다. 제안한 방법은 임계값을 이용한 이진화를 거친 후에 본 방법 을 적용하여 영상 골격화 효율을 높이고자 한다. 골격선의 비교분석을 위해서 기존의 골격화 방법들과 SPTA방법을 사용하였다. 기존방법들의 단점은 확장과 수축이 심하고 잡영가지로 인해서 원형의 영상을 유지하기 어렵다. 이러한 단점을 보안한 새로운 방법인 SPTA방법 을 제안한다.

• 한국전자파학회지:전자파기술
• /
• 제6권2호
• /
• pp.3-10
• /
• 1995

p-i-n 다이오드를 이용한 위상변위기를 설계하고, 그 특성을 해석하였다. 큰 위상변화는 가변선로형 위상변위기와 하이브리드 브랜치라인위상변위기로 실현하고, 작은 위상변화는 부하선로형 위상변위기로 실현하였다. 컴퓨터 시뮬레이션을 통하여 중심주파수 3.2GHz에서 좋은 위상변화특성이 유지됨을 확인하였고, 실제 제작된 위상변위기 특성도 이론치에 매우 근사하게 나타났다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제29권6호
• /
• pp.618-627
• /
• 2005

In this paper, we have compared and analyzed the performance of high amplifier using Doherty technique to improve linearity and efficiency of base station and repeater Power amplifier for WCDMA. This Doherty amplifier implements with 3dB branch line coupler and $90^{\circ}C$ transmission line The phase offset line is designed to maintain the high linearity and efficiency at the low efficiency Period of the power amplifier CW 1-tone experimental results at the WCDMA frequency $2.11{\sim}2.17GHz$ shows that Doherty amplifier which achieves power add efficiency(PAE) of 50% at 6dB back off the point from maximum output power 52.3 dBm, obtains higher efficiency of 13.3% than class AB Finding optimum bias Point after adjusted gate voltage, Doherty amplifier shows that $IMD_3$ improves 4dB.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 C
• /
• pp.1919-1921
• /
• 2002

In this paper, we were designed the ferroelectric phase shifter using 3-dB, $90^{\circ}$ branch-line hybrid coupler with two ports terminated in symmetric phase-controllable reflective networks. The design of phase shifter is based on reflection theory of terminating circuits. In order to find the optimum conditions of reflect phase, the effect of a change of capacitance and transmission line connected with two coupled ports of a coupler have been investigated. To obtain more accurate design parameters, finite element method is applied. We were showed large phase variation with small capacitance variation in the parallel connection of capacitor and transmission line by using EM-simulation and circuit-simulation.

• 대한교통학회지
• /
• 제25권5호
• /
• pp.195-207
• /
• 2007

수도권 광역통행의 과다한 승용차 이용은 서울시 교통문제의 핵이다. 시계 도로망의 혼잡과 더불어 도시내부로 유입된 승용차가 유발하는 2차 통행도 심각하므로 광역 승용차 통행을 줄이는 것이 시급하다. 이러한 문제를 해결하는 가장 효과적인 방안중 하나는 광역철도의 경쟁력 제고이다. 광역철도와 승용차를 비교해보면 대부분 수도권 지역에서 철도의 통행시간이 승용차를 초과하는 실정이다. 본 연구는 광역철도가 통행시간에 대한 경쟁력을 갖게 하기 위한 방안으로 대피선 설치를 통한 급행열차 도입을 제안한다. 급행과 완행열차의 혼합운행은 매우 정교한 기술적 검토를 요구하며 실질적인 운행방안의 제시가 필요하다. 본 연구에서는 급행열차에 대한 운전선도를 시뮬레이션하고 급완행 열차의 교행 패턴을 도출하는 스케쥴 작성 알고리즘을 제시하고 안산선을 대상으로 가상 적용 사례를 제시한다. 시뮬레이션 결과, 안산선의 경우 $1{\sim}2$개의 신규 대피선 설치를 통해 급행열차의 표정속도를 63kph 까지 향상시킬 수 있음을 입증한다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.1269-1274
• /
• 2011

To cut down the maintenance expenses at branch lines, the foreign developed countries have developed the low-cost signalling on low-density lines. These examples are FFB(FunkFahrBetrieb) Radio based train operation by German railways(Deutsche Bahn AG), ERTMS REGIONAL by Europe and LOCOPROL system using a GPS. Also, Korea is developing Information and Communication Technology based low-cost signalling on low-density lines. The characteristics of this system are directly controled switch and crossing by driver. For the purpose of this paper, we reviewed the business process for switch and crossing control. Specially, we compared and analysed both methods whether the driver takes control over the operation procedures of switch or the control message is carried by the command of the controller. And by utilizing the instrument of UML, I planned the switch according to the control authority and the operation procedures needed for the control of crossing.