• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 B
• /
• pp.1759-1761
• /
• 2005

The exploitation of the resource wind energy is a rapidly growing area world-wide. The number of installed units is continuously increasing, and therefore, it is important to respect and to deal with the impact of wind power generation system. From the view of an electric grid utility, there is a major problem with the impact of the wind system on the voltage of the electric grid, to which a turbine in connected. The problem is rather common in the connection of a wind power system to an already existing grid, since the grid is very seldom designed for the transmission of additional power. In this paper, it is investigated the voltage impact of distribution line, to which wind power generation system is connected.

• 설비공학논문집
• /
• 제17권4호
• /
• pp.386-395
• /
• 2005

With the development of a living standard, the importance of indoor air conditioning system in all kinds of buildings and vehicles has increased. A lot of researches on energy losses in a duct and various kinds of flow pattern in branches or junctions have been carried out over many years, because the primary object of a duct system used in HVAC is to provide equal flow rate in the interior of each room by minimizing pressure drop. In this study, to get equal flow distribution in each branch, a blockage is applied to the rectangular duct system. The flow analysis for flow distribution of a rectangular duct with two branches was performed by CFD. By using SIMPLE algorithm and finite volume method, flow analysis is performed in the case of 3-D, incompressible, turbulent flow. Also, the standard $k-{\varepsilon}$ model and wall function method were used for analysis of turbulent fluid flow. The distribution diagrams of static pressure, velocity vector, turbulent energy and kinetic energy in accordance with variation of Reynolds number and blockages location in a rectangular duct show that flow distribution at duct outlets is improved by a blockage. In this rectangular duct system, mean velocity and flow rate distribution in two branch outlets are nearly constant regardless of variation of Reynolds number, and a flow pattern of the internal duct has a same tendency as well.

• 대한산업공학회지
• /
• 제12권1호
• /
• pp.73-80
• /
• 1986

This paper deals with the problem of the optimal location of warehouses in the two stage distribution system, i.e., the distribution system where the product is transported from plants to customer areas via warehouses. The Problem is formulated with a zero-one mixed integer programming and an efficient branch and bound algorithm is then used to solve the problem. In order to obtain the solution of this problem, this paper shows the procedure of conversion of two stage distribution system into one stage distribution system. An improved method of solving the linear programming at the nodes and branching decision rule is also showed by this study.

• Nuclear Engineering and Technology
• /
• 제49권8호
• /
• pp.1629-1635
• /
• 2017

Reliable prediction of nuclear fuel rod behavior of nuclear power reactors constitutes a basic demand for steady-state calculations, design purposes, and fuel performance assessment. Perfect design of fuel rods as the first barrier against fission product release is very important. Simulation of fuel rod performance with a code or software is one of the fuel rod design steps. In this study, a software program called MARCODE is developed in MATLAB environment that can analyze the temperature distribution, gap conductance value, and fuel and clad displacement in both solid and annular fuel rods. With a comparison of the maximum fuel temperature, fuel average temperature, fuel surface temperature, and gap conductance in solid and annular fuel, the effects of a central hole on the fuel temperature distribution are investigated.

• 환경위생공학
• /
• 제20권1호
• /
• pp.12-22
• /
• 2005

This study was performed to survey distribution of microorganisms and food-borne pathogenic bacterium in order to estimate microbiological safety in seonsik and saengsik. Total aerobic bacteria was detected over $10^5\;CFU/g$ in raw materials($4.3\%$) and products($35.7\%$) of saengsik. Coliforms were detected over $10^2\;CFU/g$ in seonsik products($27.3\%$) and in raw materials($4.3\%$) and products($35.7\%$) of saengsik. Cl. perfringens was detected in saengsik products($4.8\%$). B. cereus was detected in raw materials($12.5\%$) and products($18.2\%$) of seonsik and raw materials($13.0\%$) and products($23.8\%$) of saengsik. Concentration and detection rate of microorganisms in products were higher than raw materials. These results show some food hygiene problems but do not cause food poisoning because concentration of Clostridium perfringens and B. cereus were lower than $10^5\;CFU/g$.

• Ocean and Polar Research
• /
• 제22권2호
• /
• pp.81-90
• /
• 2000

Supposed construction of a large port in the mouth of Tuman River requires careful examination of possible unfavorable ecological consequences for the Far Eastern Federal Marine Reserve. Since the Tuman River is the largest source of suspended material and possible contaminants flowing into the sea, and in order to understand how this material is allocated in the coastal zone, analyses are needed to check possible pathways of water transport and circulation system in the region. Linearized shallow water equations were used for numerical simulation of the wind-driven circulation to the north off the Tuman River mouth. The model results satisfactorily agreed with in situ data. The model circulation patterns are largely dependent on the wind direction and are conformed by the distribution of bottom sediments, and by the location of organic carbon and some pollutants accumulation zones. The most unfavorable situation for the Marine Reserve is the case of the southwesterly wind; even with quite moderate wind, the waters polluted by the run-off from the Tuman River can attain the south section of the Marine Reserve during the diurnal period.

• 대한한의학회지
• /
• 제16권2호
• /
• pp.447-452
• /
• 1995

The meridians pathway on the hand and neck studies connection with craniospinal nerve to obtain result fellowing items. 1. Large Intestine Meridian of Hand-yang ming, Small Intestine Meridian of Hand-tai yang. Triple Warmer Meridian of Meridian of Foot-tai yang, was hollow organs and its had connected branches of the trigeminal nerve and fasial nerve, cervical nerve plexus. 2. The Triple warmer meridian pathway around ear connection supersecial temporlal branch. zygomatic branch. buccal branch mandlibular branch, cervical branch of the fasial nerve. 3. The stomach meridian foot-yang ming orginate from the glabella of the frontal bone, and connection supraorbital, frontal branches of the opthalamic nerve in headach. 4. The original cell of the trigeminal nerve, and fasial nerve the medulla oblongata and pons.

• 조명전기설비학회논문지
• /
• 제23권5호
• /
• pp.110-119
• /
• 2009

본 연구에서는 임의의 각도로 분기되어 있는 전력선로 근방의 자계를 유도하여 정식화 하였으며 이 공식을 이용함으로써 그 자계 계산을 쉽게 할 수 있다. 이 공식들은 분기선로가 있는 배전선로의 설계 시 검토자료로서 활용할 수 있을 것으로 생각된다. 예로서 자계요소에 관한 공식들을 분기선로가 있는 3상 배전선로 모델에 적용하여 메틀랩 프로그램에 의해 계산하였으며 그 결과를 제시하였다. 그 분석결과를 요약하면 다음과 같다. 합성자계는 분기각이 작고 관측점의 높이 z가 낮으면 전 y-축상에 걸쳐 By 요소가 지배적이다. 이 합성자계는 분기각 ${\alpha}=\frac{\pi}{2}$[rad]의 경우 Bx의 영향을 크게 받는다. 또한 이 합성자계는 전력선 높이와 같은 전선로 근방에서 Bz요소가 지배적이며 분기각이 ${\alpha}>\frac{\pi}{2}$[rad]의 경우에는 y축의 분기전선 위치에서 매우 큰 값을 나타낸다.

• The Korean Journal of Ecology
• /
• 제28권3호
• /
• pp.163-168
• /
• 2005

본 연구는 우리나라 난대 지역에 분포하는 주요 상록수종 중 하나인 동백나무 임분을 대상으로 각 부위별 지상부 생체량을 추정하고, 주요 무기영양소의 분포를 파악하기 위하여 실시하였다. 조사지는 전남 장흥군 천관산내 동백나무 임분에서 실시하였으며, 부위별 생체량 추정식은 흉고 직경 단일 변수에 의한 직경 변수 모형을 적용하였다(logY = a + blogD, Y: 중량, D: 흉고 직경). 동백나무 임분의 부위별 생체량(ton/ha)은 주간 47.9, 당년생 소지(小枝) 1.4, 1년생 이상 가지 전체 53.4, 엽 12.5로 추정되었으며, 전체 지상부 생체량은 115.2 ton/ha이었다. 동백나무 부위별 생체량은 흉고 직경과 비선형 관계에 있었으며, 1년생 이상 엽은 흉고직경이 증가할수록 당년생 엽과의 생체량 차이가 커지는 경향을 보였다. 생지의 질소, 인산, 칼륨 농도는 고사지보다 높았으나, 칼슘 농도는 고사지가 생지보다 높았고, 당년생엽도 1년생 이상 엽보다 질소, 인산, 칼륨 농도가 높았으나, 칼슘과 나트륨 농도는 오히려 1년생 이상 엽의 농도가 높았다. 주요 무기 영양소 함량(kg/ha)은 칼륨 366.4, 질소 442.7, 칼슘 433.3, 마그네슘 118.4, 인산 50.5 및 나트륨 25.3 순이었다. 모든 무기영양소 함량에서 생지 내에 함유된 무기영양소 함량의 비율이 수체내에서 가장 높았다.

• 산업경영시스템학회지
• /
• 제23권60호
• /
• pp.11-22
• /
• 2000

The main objective of this research is to analyze an order point and an order quantity of a distribution center and each branch to attain a target service level in multi-level inventory distribution system. In case of product item, we use the item with low volume of average monthly demand. Under the continuous review method, the distribution center places a particular order quantity to an outside supplier whenever the level of inventory reaches an order point, and receives the order quantity after elapsing a certain lead time. Also, each branch places an order quantity to the distribution center whenever the level of inventory reaches an order point, and receives the quantity after elapsing a particular lead time. When an out of stock condition occurs, we assume that the item is backordered. For considering more realistic situations, we use generic type of probability distribution of lead times. In the variable lead time model, the actually achieved service level is estimated as the expected service level. Therefore, this study focuses on the analysis of deciding the optimal order point and order quantity to achieve a target service level at each depot as a expected service level, while the system-wide inventory level is minimized. In addition, we analyze the order level as a maximum level of inventory to suggest more efficient way to develop the low demand item model.