• Journal of Ocean Engineering and Technology
• /
• v.22 no.2
• /
• pp.85-90
• /
• 2008

Ships in bad weather conditions are likely to be subjected to accidental loads, such as high bending moment, collision, and grounding. Once she has damage to her hull, her ultimate strength will be reduced. This paper discusses an investigation of the effect of collision damage on the ultimate strength of a ship structure by performing a series of collapse tests. For the experiment, five box-girder models with stiffeners were prepared with a cross section of $720mm\;{\times}\;720mm$ and a length of 900mm. Of the five, one had no damage and four had an ellipse shaped damage area that represented the shape of the bulbous bow of a colliding ship. The amount of damage size was different between models. Among the damaged models, the damage in three of them was made by cutting the plate and stiffener, and in one by pressing to represent collision damage. Experiments were carried out under a pure bending load and the applied load and displacements were recorded. The ultimate strength was reduced as the damage size increased, as expected. The one with the largest amount of damage had damage to 30% of the depth, and its ultimate strength was reduced by 19% compared to the undamaged one. The pressed one has higher ultimate strength than those that were cut. This might be due to the fact that the plate around the pressed damage area contributes to the ultimate strength, whereas the cut one has no plate to contribute.

• Journal of Digital Convergence
• /
• v.12 no.1
• /
• pp.313-317
• /
• 2014

Smart-phone, PC or tablet platforms, such as smart terminals spread to the masses trying to capitalize. Smart TV also is increasing. In Korea, market size of TV is growing fast with growth of risk of hacking. In this paper, several kinds of Smart TV hacking cases are presented with the possibility of attacks against the vulnerability analysis and countermeasures. Most of the Linux operating system is open. Thus, it is vulnerable for latest hacking techniques. Most are based on the Linux OS to enhance security mount Sand-Box. However, bypass procedure using the technique, or APT attacks can avoid San-Box technique. New hacking techniques and a variety of ways will occur in the future. Therefore, this paper will develop Smart TV, and it analysis of a security threat and establishes better prepared in the future because new hacking attacks are expected to prepare more.

• KIPS Transactions on Software and Data Engineering
• /
• v.2 no.7
• /
• pp.471-478
• /
• 2013

This paper proposes a black-box based test case generation method for Simulink/Stateflow model utilizing the RRT algorithm which is a method to efficiently solve the path planning for complicated systems. The proposed method in the paper tries to solve the reachability problem with the RRT algorithm, which has to be solved for black-box based test case generations. A major problem of the RRT based test case generation algorithms is that the cost such as running time and required memory size is too much for complicated Stateflow model. The typical RRT algorithm expands rapidly-exploring random tree (RRT) in a single state space. But the proposed method expands it in dynamic state space based on the state of Simulink model, consequently reducing the cost. In the paper, a new definition of RRT state space, a distance measure and a test case generation algorithm are proposed. The performance of proposed method is verified through the experiment against Stateflow model.

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.3
• /
• pp.211-216
• /
• 2015

Large hydraulic excavator weighted 90 tons used the several pumps installed in parallel to use the hydraulic pump driving gearbox to improve fuel consumption by improving the energy efficiency of the hydraulic system. Gearbox connected to hydraulic pump supply the mechanical output to the high pressure and low pressure pump to be supplied by torque and rotation, which are the mechanical power, through a input shaft connected to large size engine of the excavator. So, gearbox connected to hydraulic pump is same as main artery in the human body and is required long life because it operates the hydraulic pump continuously during operating the engine. This study had used oil contamination analysis method to check the wear characteristics of the gearbox and frequency response characteristic analysis method to check the failure of the teeth failures of gearbox, while the test equipment adopted by the electrical feedback method to reduce the energy consumption was operating for the life assessment, in which the required power was 600 kW input power.

• Journal of Ecology and Environment
• /
• v.30 no.1
• /
• pp.49-56
• /
• 2007

We placed and monitored 2,137 nest boxes to determine how the size of the entrance hole and the box placement influenced nest box selection by secondary cavity-nesting birds and to derive recommendations for the use of nest boxes for management of cavity-nesting birds in forested environments. A total of 566 pairs of seven bird species used the nest boxes from 1997 to 2006, 562 of which were secondary cavity-nesters. Sympatric tits such as varied tits (Parus varius), great tits (P. major), and marsh tits (P. palustris) were common breeding birds in nest boxes, and showed clear preferences for 4.0 cm, 3.5 cm and 3.0 cm nest holes, respectively. Tree sparrows (Passer montanus) and Eurasian nuthatches (Sitta europaea) preferred 4 cm and 3.5 cm holes, respectively. We did not detect selection for the directional orientation for the entrance hole, but the birds appeared to avoid nest boxes that faced steep or gentle upward slopes and those less than 1.8 m from the ground. These results are probably related to avoidance of disturbance and predation. We suggest that diverse species can be supported by the placement of nest boxes with entrance holes of various sizes and that specific species can be targeted by selecting the hole sizes preferred by those species. To attract secondary cavity-nesters, managers should avoid placing nest boxes close to the ground and facing hills. This study also suggests that careful selection and placement of nest boxes is needed to avoid biases in research using nest boxes.

• Proceedings of the KSR Conference
• /
• 2005.05a
• /
• pp.646-654
• /
• 2005

The crossing construction under railroad have two methods which are cut and cover and trenchless method. First, cut and cover method is an extremely limited method concerning non-running time. Whereas, trenchless method is free from restriction such as train speed and running time, and has the strong points of safe and rapid construction. Front Jacking method, one of the trenchless methods, is frequently applied recently due to its stability during construction and vantage of assuring schedule reliability. The procedure is that after minimizing interlocking friction with structure and earth pressure due to jacking the small steel tube, pulling the precast box manufactured at the field in the ground using PC strand and hydraulic Jack. This method is able to be applied regardless of section size and length of box and condition of soil. And that is also pro-environmental. This paper presents the case of Daejeon E. W. perforate Road Project applied with the Front Jacking method.

• Proceedings of the KSRS Conference
• /
• 2007.10a
• /
• pp.29-32
• /
• 2007

Tidal channel development is influenced by sediment type, grain size, composition and tidal current. Tidal channels are usually characterized by channel development, density and shape. Quantitative analysis of tidal channels using remotely sensed data have rarely been studied. The objective of this study is to quantify tidal channels in terms of fractal dimension and compare different inter-tidal channel patterns. For the fractal analysis, we used Box counting method which had been successfully applied to streams, coastlines and others linear features. For a study, the southern part of Ganghwado tidal flats was selected where is famous for high dynamics of tidal currents and vast tidal flats. This area has different widths and lengths of tidal channels. IKONOS and Komsat-2 MSC images were used for extracting tidal channels, and the Box counting method was applied to obtain fractal dimensions (D) for each tidal channel. Yeochari area possesses channels with linear pattern and less dense development and accordingly show low D values ranging from 1.037 to 1.038. On other hands, area (near Donggumdo and Yeongjongdo ) of dendrites channel pattern and dense development resulted in high D values from 1.2057 to 1.2667. Also, area possesses channels with linear pattern had low density about $18{\sim}24%$. Area of dendritic channel pattern had high density about $34{\sim}69%$. The difference of fractal dimensions about 0.2 according to channel development in tidal flats is relatively large enough to use as an index for tidal channel classification. Also, area where channels showed linear pattern had low density about $18{\sim}24%$. Area of dendritic channel pattern had high density about $34{\sim}69%$. Using fractal dimension and density, it would be possible to quantify the tidal channel development in association with surface characteristics.

• Journal of Soil and Groundwater Environment
• /
• v.15 no.6
• /
• pp.37-45
• /
• 2010

Surfactant-enhanced ozone sparging (SEOS), an advanced version of SEAS (surfactant-enhance air sparging) was introduced in this study for the first time for removal of non-volatile contaminant from aquifer. The advantages of implementing SEAS, enhanced air saturation and expanded zone of sparging influence, are combined with the oxidative potential of ozone gas. Experiments conducted in this study were tow fold; 1-dimensional column experiments for the changes in the gas saturation and contaminant removal during sparging, and 2-dimensional box model experiment for the changes in the size of zone of influence and contaminant removal. An anionic surfactant (SDBS, sodium dodecylbenzene sulfonate) was used to control surface tension of water. Fluorescein sodium salt was used as a representative of watersoluble contaminants, for its fluorescence which is easy to detect when it disappears due to oxidative degradation. Three different gases (air, high-concentration ozone gas, and low-concentration ozone gas) were used for the sparging of 1-D column experiment, while two gases (air and low-concentration ozone gas) were used for 2-D box model experiment. When SEOS was performed for the column and box model, the air saturation and the zone of influence were improved significantly compared to air sparging without surface tension suppression, resulted in effective removal of the contaminant. Based on the experiments observations conducted in this study, SEOS was found to maintain the advantages of SEAS with further capability of oxidative degradation of non-volatile contaminants.

• Journal of Korea Game Society
• /
• v.11 no.6
• /
• pp.71-80
• /
• 2011

Recent terrain rendering applications such as 3D games and virtual reality, use GPU-based ray-casting method for rendering high-quality scenes in realtime. As the size of terrain dataset grows bigger, the rendering speed will be decreased by the increase of the number of texture samplings. To accelerate the conventional ray-casting, we propose an efficient ray casting method with subdivided bounding boxes which are based-on GPU quadtree traversal. The subdivision of the terrain's bounding box can reduce the empty spaces effectively. By performing the ray-casting with this compact bounding box, we can efficiently reduce computation with empty space skipping. Unlike the recent quadtree-based empty space skipping techniques which perform the tree traversal at each ray, our method traverses the tree only once per frame. Therefore, we can save much computational time.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.2
• /
• pp.195-199
• /
• 2005

Semi automatic welding method to use carriage for welding at large size block manufacture welding process of present shipbuilding industry is used much. Carriage is device that transfer welding torch in horizontal fillet weld here, but because it is no function that chase welding like robot welding method, use can be impossible in curved line welding, and simply use in straight line welding. Also, because it is no function that chase welding, though welding mistake corrects this happening often in straight line welding, much times and expense are cost. Added welding chase sensor and 80C196KC microcontroller that use strain gauge to carriage that is using present in paper that see hereupon and manufacture a private line model and container box model welding because developing system that can chase welding automatically straight line and curved line welding establishing and investigate about chase phenomenon.