• 한국석유지질학회지
• /
• 제2권2호
• /
• pp.43-50
• /
• 1994

경기육괴와 옥천대의 경계부분에 위치한 백악기 퇴적분지인 공주분지의 조구조운동의 특성과 지하구조를 해석하기 위하여 분지를 가로지르는 측선을 2개 설정하여 중력탐사를 실시하고, 분지의 경계를 이루는 두 단층선에 대하여 파쇄대의 발달상태를 확인하기 위하여 쌍극자 비저항탐사를 실시하였다. 부우게이상을 구하기 위한 중력자료의 처리과정에서 원추형프리즘 모형을 이용하여 지형보정값을 계산함으로써 경사가 급한 지역에서의 보정의 효과를 향상시켰다. 중력자료의 정량적해석을 위하여 역산 및 순산모델링 (forward modeling)을 실시하였으며, 전기탐사자료를 처리하여 비저항단면도를 얻었다. 중력모델링 결과, 공주분지는 중앙부의 폭이 약 $4{\cal}km$, 남동부의 폭이 약 $2.5{\cal}km$로 지표에서 보이는 바와 같은 마름모형태로 나타났다. 분지의 깊이는 약 $700{\~}400{\cal}m$로 중앙부의 기반이 솟아오른 형태를 보이는데, 이것은 분지가 형성된 후 압축응력이 작용한 결과로 해석된다. 또한 분지내부에서 형성된 저밀도의 파쇄대가 나타나는데, 이는 분지의 생성과정이나 퇴적물이 쌓인 후에 몇차례의 단층운동이 있었음을 시사한다. 분지를 형성한 주단층 가운데, 남동경계를 이루는 단층의 파쇄대는 넓게 분포하고 지하 $1{\cal}km$ 이상의 깊이까지 연장되어 있는 것으로 나타나는 반면 북서경계의 파쇄대는 비교적 미약하게 나타났다. 이로부터 분지의 남동경계를 이루는 단층을 따라 진행된 조구조운동의 강도가 상대적으로 컸을 것으로 추측할 수 있다. 이러한 양상은 남동경계를 이루는 단층대에서 저비저항대가 두텁게 나타난 전기탐사의 결과와 잘 일치한다.

• 지적과 국토정보
• /
• 제51권1호
• /
• pp.79-95
• /
• 2021

본 연구는 지적측량 단계 중 가장 중요하지만, 객관적이지 못하고 주관에 의해 측량자의 오판이나 실수가 발생할 수 있는 개연성이 큰 지적측량 성과결정 단계에서 드론사진측량을 기반으로 지적측량성과 결정의 적용성을 평가하였다. 드론사진측량 결과물에서 경계점 추출의 정확도를 판단하기 위한 실험에서는 2D와 3D영상에서 추출한 22개 필지의 자표면적과 지상측량 좌표면적을 비교하여 그 차이가 2D영상은 RMSE가 1.44m², 3D영상은 0.32m²로 정량화할 수 있었다. 또한, 정사영상을 기반으로 지적측량 성과결정을 평가하기 위한 실험에서는 자료조사를 통한 기존 측량성과 결정량과 비교하여 RMSE가 N방향으로 0.346m, E방향으로 0.296m로 나타났다. 이러한 실험결과로 미루어 볼 때 도해지역에서 정사영상기반의 성과 결정시 약 0.3m 내외의 정확도로 현지 측량없이 성과결정이 이루질 수 있으며, 이는 자료조사 및 지상측량과 더불어 정사영상이 활용된다면, 지적측량성과 결정 과정을 더 객관화하여 개인오차를 줄일 수 있다고 판단된다.

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2003년도 Proceedings of the international symposium on the fusion technology
• /
• pp.410-415
• /
• 2003

Ground subsidence has occurred in the downtown of Muan-eup in Korea. Integrated geophysical survey, including two-dimensional resistivity, CSMT(Controlled source magnetotelluric), magnetic, borehole logging, GPR and resistivity tomography, has been conducted to investigate the cause of subsidence and ground conditions. Since the target area is in the city downtown, there were no spaces for surface geophysical methods. To get regional geology and to facilitate the detailed geophysical interpretation in the survey area, two-dimensional resistivity, CSMT and magnetic surveys have been applied in the outer region of the downtown. From these results, we could accurately define the Gwangju fault system and estimate the geologic conditions in the downtown. For the detailed survey of the downtown area, resistivity tomography and borehole logging data have been acquired using a few tens of densely located boreholes. Among these survey results, borehole logging data provided the guide to classification of the rock type and we could define the geologic boundary of granite and limestone formations. From the resistivity tomograms of 42 sections, which are densely located enough to be interpreted in a three-dimensional manner, we could delineate the possible weak zones or cavities in the limestone formations. In particular, resistivity tomograms in the subsided area showed the real image of ground subsidence. The map of hazardous zone has been derived from the joint interpretation of these survey results and we could provide the possible reinforcement strategy in this area.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2007년도 학술발표회 논문집
• /
• pp.1997-2002
• /
• 2007

본 연구에서는 유역내의 토양보존계획 및 관리를 위해 토사유실평가모델과 현장검토를 실시하여 대청호 유역의 토사유실 원인지역을 선정하였다. 먼저 DEM, 정밀토양도, 토지피복도 및 강우자료를 기반으로 RUSLE 모델을 이용하여 대청호 유역의 단위토사유실량을 평가하였다. 토사유실모델에서는 토사의 이동경로 및 작물종류를 고려하기 어렵기 때문에 다각적인 현장조사를 통해 토사유실 주요하천을 선정하는 것이 필요하다. 모델로 분석한 소유역별 원인지역을 검토하기 위해 현장조사를 실시한 결과, 대청호유역에서는 무주남 대천, 원당천, 금평천 등이 높은 토사유실량을 나타내었다. 현장조사 결과 이러한 지역들은 하천주변에서 경사가 급하고 작물의 재배조건도 토사유실에 취약한 것으로 분석되었다.

• 대한기계학회논문집B
• /
• 제25권10호
• /
• pp.1427-1435
• /
• 2001

Air movement in wokplaces, whether resulting from a forced ventilation system or naturally occurring airflow, has a significant impact on occupational health. In a huge shipbuilding factory building, typical harmful factors such as fume or vaporized gas from welding and cutting of steel plates, and dusts from grinding give unpleasant feeling. From field data survey, the yearly dominant, wind directions for the shipbuilding factory building tested were northwest, northeast and southeast Among the three wind directions, the ventilation improvement was the worst for the northeastern wind. This study was focused on location of the opening vents in order to utilize the natural ventilation effectively. Instantaneous velocity fields inside the 1/1000 scale-down factory building model were measured using a 2-frame PIV system. The factory building model was embedded in an atmospheric boundary layer simulated in a wind tunnel. The modified vents improve the internal Ventilation flow with increasing the flow speed more than two times, compared with that of present vents.

• 환경영향평가
• /
• 제15권1호
• /
• pp.67-78
• /
• 2006

Global warming brings about changes of diverse environmental, especially changes of plant distribution. The purpose of this paper is to examine the relationship between temperature rise and changes of northern limit of vegetation growth in Korea. Bamboos (Phyllostachys) and boundary between the northern type and southern type of garlic (Allium sativum L.) were selected. The data of the distributions of bamboos and garlic are collected by field survey and interviews. Temperature is analyzed from 1904 to 2000. The northern limit of Phyllostachys moves 60-100 km northward, for about 100 years, the period of 1907-2003 and mean temperature of Korea increases about $2^{\circ}C$ during the same period. It means that the northern limit moves 30-50 km northward, for each $1^{\circ}C$ rising of January mean temperature. The boundary between the northern type and southern types of garlic moves northward 40-140 km from 1980s to 2000. The moving width is broad in the west coastal region while the width is narrow in the inland and mountain regions. The mean moving width is about 100 km.

• 대한기계학회논문집A
• /
• 제26권10호
• /
• pp.2008-2017
• /
• 2002

Joint structure of a transducer horn-holder assembly fur a wire bonder was examined through FEM contact analysis. A three dimensional modeling and analysis was carried out to survey the internal physics of this structure and to prove the accuracy of a computation compared to a measurement. After validation, a simple two dimensional model was built fur various parametric study considering the efficiency and speed of the computation. Several factors such as boundary conditions, a modeling boundary, mesh density and so on, were considered to obtain consistency with three dimensional analysis. An arc angle and a position of each holder boss were chosen as design parameters. A design of experiment was applied to find out an optimized design of the holder geometry. As a result, a guideline for holder boss design was suggested and main factors and their influence on stress concentration in the transducer horn were surveyed.

• 아태비즈니스연구
• /
• 제15권1호
• /
• pp.159-177
• /
• 2024

Purpose - The purpose of this study is to reveal the effect of a High Performance Work System(HWPS) on research performance. In addition, this study examines the mediation effect of Innovation Commitment(IC) and the moderated mediation effect of Perceived Organizational Support(POS), and seeks to reveal the antecedents and boundary variables that affect research performance. Design/methodology/approach - The level of analysis is at the individual level. A survey was collected from researchers at government-funded research institutes in the Daejeon and Sejong areas. 265 questionnaires were used in the final statistical analysis. Confirmatory factor analysis was performed using the AMOS 21. Correlation analysis, regression analysis, and bootstrapping by Process Macro were performed using the SPSS 19. Findings - As a result of the study, HWPS has a positive effect on IC, and IC has a positive effect on research performance. Through this results, it was found that IC mediates the relationship between the HPWS and research performance. In addition, POS positively moderated the mediating effect of HPWS on research performance through IC. Research implications or Originality - First, IC can be increased through a HPWS. Second, the effect of the HWPS on individual research performance through IC provides implications that the HWPS can be effectively applied not only to general companies but also to research organizations. Third, the boundary effect of POS was revealed. Fourth, research performance was measured through objective quantitative indicators rather than subjective.

• 한국환경복원기술학회지
• /
• 제14권3호
• /
• pp.101-113
• /
• 2011

The purpose of this study are to develop a SDSS (Spatial Decision Support System) that can incorporate diverse opinions of stakeholders related the designation of protected areas (PA), and to employ the model for the readjustment of the boundary line of the Jirisan National Park of Korea. The SDSS would lead to more rational and less controversial decision-making during the expansion or removal of PA in Korea. Research methods are as follows. Firstly, to select evaluation criteria for SDSS for PA designation by using expert interview and literature survey. Secondly, to measure their preferences on the designation of additional PA or the removal of a part of PA based on the opinions of various stakeholders such as local residents, environmental groups, or public officials. Thirdly, to produce conservation priority maps based on a multi-criteria decision making technique. The SDSS would be used to rational decision making for the expansion of PA or the release of a certain part of PA by reflecting diverse preferences on biodiversity conservation and economic interest of residents. The visualization of conservation priority maps would also increase the efficiency of such decision making processes. The evaluation criteria for the expansion of PA for biodiversity conservation includes vegetation conservation value, wildlife conservation value, and the habitats of key species. The evaluation criteria for the removal of PA includes the proximity to roads and the boundary of PA, land use types, and conservation zoning of the PA. Preference weights are based on data collected from the Jirisan National Park. Both the conservation priority and removal priority maps are based on land parcels so that property rights of all parcels would be correctly represented.

• 지적과 국토정보
• /
• 제52권2호
• /
• pp.137-152
• /
• 2022

지적측량사가 지적경계복원측량을 통하여 지상에 표시한 경계는 소유자의 소유권의 한계를 명확히 밝힌 것으로 구속력과 확정력을 갖게 된다. 그러나 등록상의 오류라든지 측량상의 문제, 소유자의 경계점 인식 오류 등 제반 요인들로 인하여 매년 지적측량 분쟁에 따른 민원이 끊이지 않고 발생하고 있다. 지적측량 이해당사자들은 지적측량의 이의를 해결하기 위하여 먼저 민원제기에 따른 행정적 절차를 통한 해결 방법과 법원을 통한 경계확정소송을 통한 해결방안을 모색하게 된다. 그 결과 경계에 인접한 이해 당사자 들은 물론 관련 공적 기관들에 있어 민원 해결을 위한 어려움들이 발생하게 된다. 따라서 본 연구에서는 지적측량과 경계결정에 대한 사항을 고찰하고, 2016년부터 2021년까지 6년여 동안 중앙지적위원회에서 심의 의결한 지적측량적부재심사 사례를 유형별로 분류하고 그 대표적 사례들을 분석 제시함으로써 추후 지적측량을 실시함에 있어서 이들 사례를 참고하여 경계분쟁 사례를 줄이고 지적측량의 신뢰성 향상에 기여하고자 한다.