• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2002년도 학술대회지
• /
• pp.755-758
• /
• 2002

The physical phenomena of rectangular open cavity are numerically investigated in this paper Two-dimensional cavity problems with laminar boundary layers in upstream are simulated by using the compressible Wavier-Stokes equations. The high-order and high-resolution numerical schemes are used for the evaluation of spatial derivatives and the time integration. Cross-correlation is used to analyze the characteristics of wave propagation along time and spatial. Sudden phase shifting of 90 degrees is appeared near downstream edge, and this is coincident with the phase lag suggested in original Rossiter's equation. The results give a further understanding of the physical phenomenon of noise generation, and the resonance of flow and acoustic in cavity. Moreover, modified Rossiter's equation, which is more accurate and can be applied in various conditions, is suggested. The distance from the point of vortex generation to the point of vortex collapsing acts as effective distance of cavity resonance, and the phase difference between the point of vortex collapsing and the point of acoustic source acts as phase lag. The mechanism of acoustic generation is fully understood in this paper. The mechanism of acoustic generation is fully understood in this paper.

• Structural Engineering and Mechanics
• /
• 제57권3호
• /
• pp.543-567
• /
• 2016

This study attempts to address the buckling and free vibration characteristics of an isotropic cylindrical panel subjected to non-uniform temperature rise using numerical approach. Finite element analysis has been used in the present study. The approach involves three parts, in the first part non-uniform temperature field is obtained using heat transfer analysis, in the second part, the stress field is computed under the thermal load using static condition and, the last part, the buckling and pre-stressed modal analysis are carried out to compute critical buckling temperature as well as natural frequencies and associated mode shapes. In the present study, the effect of non-uniform temperature field, heat sink temperatures and in-plane boundary constraints are considered. The relation between buckling temperature under uniform and non-uniform temperature fields has been established. Results revealed that decrease (Case (ii)) type temperature variation field influences the fundamental buckling mode shape significantly. Further, it is observed that natural frequencies under free vibration state, decreases as temperature increases. However, the reduction is significantly higher for the lowest natural frequency. It is also found that, with an increase in temperature, nodal and anti-nodal positions of free vibration mode shapes is shifting towards the location where the intensity of the heat source is high and structural stiffness is low.

• 한국실내디자인학회논문집
• /
• 제37호
• /
• pp.88-94
• /
• 2003

In recent years, the direction of the contemporary design paradigm has been shifting from the western to eastern culture; while the western paradigm focuses more on logic and reasons, the eastern paradigm values more on the emotional factors. Today, the interior architecture, in the professional field of design, is gaining its attention from the public due to its rapid development of multi-purpose intelligent buildings which are expected to grow more in coming years. Users are becoming high in demand for the maximum efficiency 8f aesthetical Intoners. While functionality Is the fundamental element In office design, there are increasing request to express uniqueness in the given space such as including the traditional concepts specially when we are living in the era of "globalization". The effect of both WTO policy and the globalization, brought many multinational or foreign companies to expand in Korea. Their request for interior design is to reflect Korean traditions in the office space in order to present the regional characteristics of Korea. Office designs in Korea has been developing rapidly in terms of its advancement in building technology and visual aesthetics. However, the Korean traditional concepts have been expressed very broadly without any boundary or knowledge. Thus, the objective of this study is to analyze the Korean traditions and design elements expressed in various office spaces on case-by-case basis and to provide the typology and the guidelines for the future designs.e designs.

• 스마트미디어저널
• /
• 제8권2호
• /
• pp.46-57
• /
• 2019

In recent research, deep learning-based methods have achieved state-of-the-art performance in various computer vision tasks. However, these methods are commonly supervised, and require huge amounts of annotated data to train. Acquisition of data demands an additional costly effort, particularly for the tasks where it becomes challenging to obtain large amounts of data considering the time constraints and the requirement of professional human diligence. In this paper, we present a data level synthetic sampling solution to learn from small and imbalanced data sets using Generative Adversarial Networks (GANs). The reason for using GANs are the challenges posed in various fields to manage with the small datasets and fluctuating amounts of samples per class. As a result, we present an approach that can improve learning with respect to data distributions, reducing the partiality introduced by class imbalance and hence shifting the classification decision boundary towards more accurate results. Our novel method is demonstrated on a small dataset of 2789 tomato plant disease images, highly corrupted with class imbalance in 9 disease categories. Moreover, we evaluate our results in terms of different metrics and compare the quality of these results for distinct classes.

• 한국해양학회지:바다
• /
• 제5권4호
• /
• pp.257-266
• /
• 2000

개방경계에서의 조석 강제력과 해수의 유 ${\cdot}$ 출입에 의한 남해의 해수순환을 모의하기 위하여 수직적분된 2차원 Princeton Ocean Model을 적용하였다. 두 강제력을 동시에 고려하기 위하여 일차적으로 개방경계에서 조석을 부과하여 조류순환을 재현한 후 개방경계에서 모델이 계산한 평형상태의 조류와 관측된 해류를 동시에 고려하는 2단계 모델링기법을 채택하였다 조류의 영향이 제거된 순환모델 결과에 의하면 남해에서 정상상태의 해류분포는 강한 해류의 영향으로 조석 잔차류 분포와는 상당히 다른 양상을 보이고, 해역에 따라서는 조류만큼 강한 해류가 나타난다. 제주해협을 통해 유입된 제주해류는 해저지형의 영향으로 인해 국지적으로 연안역과 가까워지거나 멀어지면서 동향하며, 제주도 동쪽과 대마도 사이을 통하여 남해로 유입되는 대마난류는 제주도 동쪽에서 비교적 멀리 북쪽까지 북상 후 시계방향으로 회전하여 제주해류와 합쳐진다. 제주해류와 대마난류가 합쳐진 후 대한해협을 통해 동해로 유출될 때 대마도 서쪽의 수심이 깊은 골에서 해류의 강화가 일어나며, 이는 수층의 두께가 증가함으로서 생성되는 양의 상대와도를 없애주기 위한 마찰경계층이 형성되기 때문인 것으로 사료된다. 개방경계에서의 조석 강제력과 해수 유출입을 개별적으로 고려할 경우 연안역에서의 해수순환은 두 강제력을 모두 고려한 경우의 순환형태와 차이를 보이고 있어 이들 두 강제력이 동시에 고려되어야 함을 뚜렷이 보여준다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제18권7호
• /
• pp.1022-1028
• /
• 2005

The objectives of this study were to evaluate and compare the environmental load of two different concentrate feed supply systems to the Japanese domestic livestock industry using the Life-cycle Assessment (LCA) method. The current system was defined as that requiring 11.469 million tons of corn imported from the US by sea transport and supplied as concentrate feed to the Japanese domestic livestock industry. The new system proposed by Kaku et al. in 2004 was defined as where 802,830 tons of US imported corn would not be planted in US and would be replaced by barley planted in 278 thousand ha of Japanese domestic land left fallow for the past year. In this case, 909,000 tons of domestic harvest barley would have been supplied as concentrate feed to the Japanese domestic livestock industry in 2000. The activities taken into account within the two system boundaries were three stages: concentrate feed production, feed transportation and gas emission from the soil by chemical fertilizer. Finished compost was regarded as organic fertilizer and was put instead of chemical fertilizers within the system boundary. Adoption of this new concentrate feed supply system by the Japanese domestic livestock industry could reduce 78,462 tons $CO_2$-equivalents of global warming potential, 347 tons $SO_2$-equivalents of acidification potential, 54 tons $PO_4$-equivalents of eutrophication potential and 0.842 million GJ as energy consumption below 2,000 levels. This LCA study comparing two Japanese domestic livestock concentrate feed supply systems showed that the stage of feed transport contributed most to global warming and the stage of emission from the soil contributed most to acidification and eutrophication. The Japanese domestic livestock industry could participate in emissions trading with $CO_2$-equivalents reduced by shifting from some imported US corn as a concentrate feed to domestic barley planted in land left fallow. In that case the Japanese government could launch emissions trading in accordance with Kyoto Protocol in the future.

• 대한건축학회논문집:계획계
• /
• 제36권5호
• /
• pp.3-10
• /
• 2020

According to Carol Duncan, the museum can be studied in the aspect of space and object from viewer experience. The paradigm of modern museums is shifting away from the object toward the human. The modern museum begins to have the diversity activities and the experience by the body. The purpose of this study is to analyze methods of Carlo Scarpa's museum works. An Italian architect, Carlo Scarpa had characterized montage architecture through fragments and isolations. This study reviews the works of Carlo Scarpa's museum focused on Museo di Castelvecchio. Carlo Scarpa had left the existing materials and coated it with new materials intentionally. This method makes the layer and it exposes the historical times. The layer is a reinterpreting technic of Venetian architecture. The perceptive experience appears at the exhibition boundary through light, material, pattern, axis, and composition of elements. Through the analysis, the architecture of Carlo Scarpa's museum provides a walking path and the composition of exhibition objects with visual logics. It makes and show us the experience with combining images. Carlo Scarpa had tried to expose the past times in the architecture of museum with expression on the layers and to connect the body's movements with seeing and gazing. This expression makes possible the perceptual experience. It can be understood as the montage characteristic. Through this, Carlo Scarpa's museum makes us relationship with historical architecture. Carlo Scarpa had planned a exhibitional promenade in the architecture of museums. In this regard, this is the museography of Carlo Scarpa's museums that should be paid attention to modern times in historical architecture.

• 대한금속재료학회지
• /
• 제48권2호
• /
• pp.122-132
• /
• 2010

Higher strength and fracture toughness of reactor pressure vessel steels can be obtained by changing the material specification from that of Mn-Mo-Ni low alloy steel (SA508 Gr.3) to Ni-Mo-Cr low alloy steel (SA508 Gr.4N). However, the operation temperature of the reactor pressure vessel is more than $300^{\circ}C$ and the reactor operates for over 40 years. Therefore, we need to have phase stability in the high temperature range in order to apply the SA508 Gr.4N low alloy steel for a reactor pressure vessel. It is very important to evaluate the temper embrittlement phenomena of SA508 Gr.4N for an RPV application. In this study, we have performed a Charpy impact test and tensile test of SA508 Gr.4N low alloy steel with changing impurity element contents such as Mn and P. And also, the mechanical properties of these low alloy steels after longterm heat treatment ($450^{\circ}C$, 2000hr) are evaluated. Further, evaluation of the temper embrittlement by fracture analysis was carried out. Temper embrittlement occurs in KL4-Ref and KL4-P, which show a decrease of the elongation and a shifting of the transition curve toward high temperature. The reason for the temper embrittlement is the grain boundary segregation of the impurity element P and the alloying element Ni. However, KL4-Ref shows temper embrittlement phenomena despite the same contents of P and Ni compared with SC-KL4. This result may be caused by the Mn contents. In addition, the behavior of embrittlement is not largely affected by the formation of $M_3P$ phosphide or the coarsening of Cr carbides.

• 스마트미디어저널
• /
• 제1권3호
• /
• pp.36-42
• /
• 2012

요즘 스마트폰과 스마트 TV와 같은 스마트 기기에 대한 관심이 높아짐에 따라 보다 다양한 기능을 포함하는 영상장치가 주목받고 있다. 특히, 스마트 TV는 3차원 영상을 서비스함에 따라 보다 고화질의 3차원 영상을 효율적으로 부호화하는 것이 중요하다. 최근 MPEG(moving picture experts group) 그룹에서는 다시점 영상과 깊이 영상을 동시에 압축하여 부호화하는 표준화 작업이 진행되고 있다. 제한된 수의 시점을 이용하여 편안한 3차원 입체 영상을 재현하기 위해서는, 충분한 수의 중간시점의 영상을 생성해야 한다. 깊이정보를 이용하여 3차원 워핑을 수행하면 가상시점의 영상을 합성할 수 있는데, 깊이값의 정확도에 따라 화질이 달라진다. 스테레오 정합 기술을 이용하여 깊이맵을 획득할 때 객체의 경계와 같은 깊이값 불연속 영역에서 깊이값 오류가 발생할 수 있다. 이러한 오류는 생성한 중간영상의 배경에 원치 않는 잡음을 생성한다. 본 논문에서는 편안한 3차원 비디오 재현을 위하여 깊이맵을 기반으로 중간시점의 영상을 생성할 때 발생하는 경계 잡음을 제거하는 방법을 제안한다. 중간시점의 영상을 합성할 때 비폐색 영역을 합성한 후 경계 잡음이 발생할 수 있는 영역을 구별한 다음, 잡음이 없는 참조영상으로 대체함으로써 경계 잡음을 제거할 수 있다. 실험 결과를 통해 배경 잡음이 사라진 자연스러운 합성영상을 생성했다.

• 대한전자공학회논문지SD
• /
• 제43권6호
• /
• pp.9-17
• /
• 2006

SoC(System-On-Chip) 시스템에서 초 저전력 시스템을 구현하기 위한 dynamic voltage and frequency scaling (DVFS)알고리즘에 사용될 시스템 버스의 다중 코어 전압 레벨을 생성해주는 새로운 다계층(multi-level) 코어 전압용 high-speed level up/down Shifter 회로를 제안한다. 이 회로는 내부 회로군과 외부 회로군 사이에서 서로 다른 전압레벨을 조정 접속하는 I/O용 level up/down shifter interface 회로로도 동시에 사용된다. 제안하는 회로는 인터페이스 접속에서 불가피하게 발생하는 속도감쇄와 Duty Ratio 불안정 문제를 최소화하는 장점을 갖고 있다. 본 회로는 500MHz의 입력 주파수에서 $0.6V\sim1.6V$의 다중 코어 전압을 각 IP들에서 사용되는 전압레벨로, 또는 그 반대의 동작으로 서로 Up/Down 하도록 설계하였다 그리고 제안하는 I/O 용 회로의 level up shifter는 500MHz의 입력 주파수에서 내부 코어 용 level up shifter의 출력전압인 1.6V를 I/O 전압인 1.8V, 2.5V, 3.3V로 전압레벨을 상승 하도록 설계하였으며, level down shifter는 반대의 동작으로 1Ghz의 입력 주파수에서 동작하도록 설계하였다. 시뮬레이션 및 결과는 $0.35{\mu}m$ CMOS Process, $0.13{\mu}m$ IBM CMOS Process 와 65nm CMOS model 변수를 이용한 Hspice를 통하여 검증하였다. 또한, 제안하는 회로의 지연시간 및 파워소모 분석과 동작 주파수에 비례한 출력 전압의 Duty ratio 왜곡에 대한 연구도 하였다.