• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.13 no.1
• /
• pp.48-53
• /
• 2017

We diagnosed the defect using the data obtained from the nuclear power plant simulator. In this paper, we diagnosed faults in the nuclear power plant system for discovery instead of the traditional single-component or device unit. We created the six fault scenarios and used a fault simulator to obtain the fault data. It was extracted pattern from acquired failure data. Neural network model was trained and simple pattern matching algorithm was applied. We presented a simulation result and confirmed that the applied algorithm works correctly.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.1
• /
• pp.393-399
• /
• 2018

An electrostatic boundary-value problem of a dielectric-wedge-backed, double-slotted conducting wedge is investigated to analyze an asymmetric coplanar waveguide with an infinite dielectric thickness using the Mellin transform and a mode-matching method. Our theoretical solution based on eigenfunction expansion and residue calculus is a rigorous and fast-convergent series form. Numerical computations are conducted to evaluate the potential field, capacitance, and characteristic impedance for various structures of the asymmetric coplanar waveguide. The computed results show good agreement with the simulated results.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2001.10a
• /
• pp.801-804
• /
• 2001

This article is concerned with automatic segmentation of two adjacent vowels for speech signals. All kinds of transition case of adjacent vowels can be characterized by spectrogram. Firstly the voiced-speech is extracted by the histogram analysis of vowel indicator which consists of wavelet low pass components. Secondly given phonetic transcription and transition pattern spectrogram, the voiced-speech portion which has consecutive vowels automatically segmented by the template matching. The cross-correlation function is adapted as a template matching method and the modified correlation coefficient is calculated for all frames. The largest value on the modified correlation coefficient series indicates the boundary of two consecutive vowel sounds. The experiment is performed for 154 vowel transition sets. The 154 spectrogram templates are gathered from 154 words(PRW Speech DB) and the 161 test words(PBW Speech DB) which are uttered by 5 speakers were tested. The experimental result shows the validity of the method.

• Proceedings of the Korean Information Science Society Conference
• /
• 2005.07b
• /
• pp.805-807
• /
• 2005

본 논문에서는 동적 계획법(dynamic programming)과 이미지 세그먼트(segment)를 이용한 새로운 스테레오 정합(stereo matching)기법을 제안한다. 일반적으로 동적 계획법(dynamic programming)은 빠르면서도 비교적 정확하고, 조밀(dense)한 disparity map을 얻을 수 있다. 그러나 경계(boundary)근처의 폐색지역(occlusion region)이나, 텍스쳐가 적은 모호한 영역에서는 잘못된 결과를 유도할 수 있다. 본 논문에서는 이러한 문제점들을 해결하기 위해 먼저 이미지를 아주 작은 영역으로 분할(over-segmentation)하고, 이런 작은 영역들이 비슷한 disparity를 가질 것이라고 가정한다. 다음으로 동적 계획법(dynamic programming)을 통해 정합을 수행한다. 여기서 계산비용(cost)은 기존의 정합윈도우 안에서 세그먼트 영역을 적용한 새로운 비용함수를 사용하며, 이 새로운 비용함수를 통해 정확도를 높인다. 마지막으로 동적 계획법을 통하여 얻어진 조밀한 disparity map을 세그먼트 영역들의 시각특성(visibility)과 유사도(similarity)를 이용하여 에러를 찾아내고, 세그먼트 정합을 통해 수정함으로 정확한 disparity map을 찾아낸다.

• Journal of Ocean Engineering and Technology
• /
• v.23 no.3
• /
• pp.6-13
• /
• 2009

Based on the boundary element method, the motion responses and transmission coefficients of a moored floating breakwater were investigated in oblique waves. To satisfy the outgoing radiation condition in the far field, the fluid domain was divided into inner and outer regions. The complete solution could be obtained by applying the matching conditions between the eigenfunction-based outer solution and BEM-based inner solution. Using the developed predictive tools, the wave exciting forces, added mass, damping coefficients, motion responses, and transmission coefficients were assessed for various combinations of breakwater configuration, wave heading, mooring cables properties, and wave characteristics. It was found that the transmission coefficient for a moored floating breakwater was closely dependent on the motion responses, which were greatly amplified at the resonant frequencies.

• Journal of Industrial Technology
• /
• v.13
• /
• pp.25-31
• /
• 1993

This paper presents an analysis of microwave device component. An H-Plane waveguide component with arbitrary shape is analyzed using finite element method(FEM) cooperated with boundary element method(BEM). The finite element method(FEM) is applied to the junction region and the boundary element method(BEM) to the waveguide region. For the application of BEM in the waveguide structure, a ray representation of the waveguide Green's function is used. The proposed technique was applied to the analysis of the waveguide inductive junction to compare the numerical result with the result of the mode matching technique. The comparison showed good agreements between the two results. Transmitted powers were also computed in T-junction waveguides for the various shape of the junction area.

• Journal of information and communication convergence engineering
• /
• v.7 no.4
• /
• pp.539-544
• /
• 2009

An estimation of 3D velocity field including occluded parts without maxing tracer to the fluid had not only never been proposed but also impossible by the conventional computer vision algorithm. In this paper, we propose a new method of three dimensional optical flow of the fluid based on physical model, where some boundary conditions are given from a priori knowledge of the flow configuration. Optical flow is obtained by minimizing the mean square errors of a basic constraint and the matching error terms with visual data using Euler equations. Here, Navier-Stokes motion equations and the differences between occluded data and observable data are employed as the basic constrains. we verify the effectiveness of our proposed method by applying our algorithm to simulated data with partly artificially deleted and recovering the lacking data. Next, applying our method to the fluid of observable surface data and the knowledge of boundary conditions, we demonstrate that 3D optical flow are obtained by proposed algorithm.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2009.01a
• /
• pp.273-277
• /
• 2009

A compressed video stream is very sensitive to transmission errors that may severely degrade the reconstructed image. Therefore, error resilience is an essential problem in video communications. In this paper, we propose novel temporal error concealment techniques for recovering lost or erroneously received macroblock (MB). To reduce the computational complexity, the proposed method adaptively determines the search range for each lost MB to find best matched block in the previous frame. And the original corrupted MB split into for $8{\times}8$ sub-MBs, and estimates motion vector (MV) of each sub-MB using its boundary information. Then the estimated MVs are utilized to reconstruct the damaged MB. In simulation results, the proposed method shows better performance than conventional methods in both aspects of PSNR.

• Journal of Welding and Joining
• /
• v.19 no.2
• /
• pp.200-207
• /
• 2001

Three-diemnsional bead profile was measured using the biprism stereo vision sensor in GMAW, which consists of an optical filter, biprism and CCD camera. Since single CCD camera is used, this system has various advantages over the conventional stereo vision system using two cameras such as finding the corresponding points along the horizontal scanline. In this wort, the biprism stereo vision sensor was designed for the GMAW, and the linear calibration method was proposed to determine the prism and camera parameters. Image processing techniques were employed to find the corresponding point along the pool boundary. The ism-intensity contour corresponding to the pool boundary was found in the pixel order and the filter-based matching algorithm was used to refine the corresponding points in the subpixel order. Predicted bead dimensions were in broad agreements with the measured results under the conditions of spray mode and humping bead.

• Journal of Ocean Engineering and Technology
• /
• v.15 no.1
• /
• pp.7-11
• /
• 2001

In this paper, trapezoid sections and prominence sections were examined to improve the performance of floating breakwater in long waves. The linear potential theory is used and the boundary element method with a matching boundary is employed for numerical computation. The effects of the side slope of the trapezoid section and the geometry ratio of the prominence section on the floating breakwater were examined. It was found that trapezoid sections show lower transmission coefficients than the rectangular sections in the long wave range. In prominence sections the size of the sides are more important than the size of the top. Proper choices of the pontoon type geometry may move the local minimum point of the wave transmission coefficient toward the longer wave ranges and improve the performance of the floating breakwater in the long wave range for a given wave period.