• Proceedings of the KIEE Conference
• /
• 2002.11c
• /
• pp.197-200
• /
• 2002

We newly developed the procedures of X-ray Cargo inspection system with acquisition of multi-channel data, analog to digital converter and post logic circuit which is controlled by the FPGA. The IEEE1149.1 standard defines a four-wire serial interface(a fifth wire is optional)to access complex integrated circuits(ICs) such as PLD. This paper describes that Boundary_Scan test method applied to our home made cargo inspection system.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2020.07a
• /
• pp.7-9
• /
• 2020

현재 드론을 이용한 측량 기술은 '드론 사진측량' 방식이 일반적이다. '드론 사진측량' 방식은 드론의 고질적인 문제점인 배터리 문제와 모델링 시 시간이 오래 소요된다는 단점이 있다. 따라서 효율적이고 새로운 방식의 드론 측량 기법이 필요한 실정이다. 본 논문에서는 드론을 활용하여 수치지적의 경계점 좌표 기반의 새로운 측량 방식을 제안하여 경계 복원 측량의 효율성을 향상시키고자 한다.

• Spatial Information Research
• /
• v.20 no.2
• /
• pp.45-57
• /
• 2012

Recently, local governments in Korea are promoting the rapid development of marine for delineating jurisdictional sea area. The importance of a maritime boundary has being emphasized, as jurisdictional sea area disputes among local governments have been increasing. The absence of the delineating standard of maritime boundary has become a source of contention between neighborhood local governments. So the delineating standard of maritime boundary in Korea will be required. The purpose of this study is to derive an improvement plan for the scientific delimitation standard of maritime boundary by analyzing "A hydrographic survey guideline for confirmation of maritime boundary". The results of this study are as follows. Firstly, we defined the concept of the delimitation standard of maritime boundary. Secondly, we set the boundary, factors and processes of the delineating standard of maritime boundary through classifying them in detail. Lastly, we suggested the makeup of a conflict adjustment committee for preventing jurisdictional sea area disputes among local governments.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2005.06a
• /
• pp.1102-1107
• /
• 2005

The analysis of the thermal boundary resistance is very important in the both cases of microscale and macroscale systems because it plays a role of thermal barrier against a heat flow. Especially, since fairly large heat energy is generated in microscale or nanoscale systems with electronic chips, the thermal boundary resistance is a key factor to guarantee the performance of those devices. In this study, the transfer of the oscillator's motion information with 2 degrees of freedom is investigated for clarifying the mechanism of a thermal boundary resistance. We found that the transfer of the oscillator's motion information is defined as a cross-correlation coefficient and the magnitude of it determines the temperature jump over a solid interface. That is, the temperature jump over an interface increases as the magnitude of a cross-correlation coefficient decreases and vice versa.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.39 no.6
• /
• pp.24-35
• /
• 2002

The wavelet transform is combined with the boundary element method (BEM), to solve efficiently the Maxwell's equation and the proposed method is applied to the electromagnetic problem for the analysis of topological effects of phase-shifting masks. The accuracy of the module developed was verified by comparison with both analytic solutions and published results. In addition, it was found that the boundary element method in combination with the wavelet matrix transform would be more efficient than the conventional methods based on the BEM in views of the calculation speed and the usage of computer memory.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07b
• /
• pp.784-789
• /
• 2004

Bulk ZnO varistor based on Matsuoka, which varied $SiO_2$ addition has fabricated by standard ceramic process. The micro-electrode, which fabricated for investigation on degradation property of the Single Grain Boundary of ZnO varistor, has sticked by lithography semiconductor process. The values of AC degradation has measured with 150% operating voltage in varistor threshold with 120 minute in 60Hz. In here we observed V-I and V-C property in every 30minute. The operating voltage of Single Grain Boundary has shown in variable patterns in the characteristic of V-I Property. By increasing the $SiO_2$ contents, operating value has also increased and dominated on degradation proper. In EPMA analysis, we know that added $SiO_2$ was nearly distributed at the Grain Boundary. $SiO_2$ has gradually distributed in Grain Boundary condition during the process of crystal growth. It contributes to degradation depression and decision of operating voltage. We also demonstrated for using practical application and performance on distribution random loop based on V-I Properties in Single-Grain-Boundary.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.8A
• /
• pp.679-688
• /
• 2012

In this paper, performance improved hole-filling algorithm including boundary noise removing pre-process which can be used for an arbitrary view synthesis with given two views is proposed. Boundary noise usually occurs because of the boundary mismatch between the reference image and depth map and common-hole is defined as the occluded region. These boundary noise and common-hole created while synthesizing a virtual view result in some defects and they are usually very difficult to be completely recovered by using only given two images as references. The spiral weighted average algorithm gives a clear boundary of each object by using depth information and the gradient searching algorithm is able to preserve details. In this paper, we combine these two algorithms by using a weighting factor ${\alpha}$ to reflect the strong point of each algorithm effectively in the virtual view synthesis process. The experimental results show that the proposed algorithm performs much better than conventional algorithms.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.44 no.6
• /
• pp.63-74
• /
• 2007

Fast Fourier transform(FFT) is powerful, fast computation framework for convolution in many image restoration application. However, an actually observed image acquired with finite aperture of the acquisition device from the infinite background and it lost data outside the cropped region. Because of these the boundary artifacts are produced. This paper reviewed and summarized the up to date the techniques that have been applied to reduce of the boundary artifacts. Moreover, we propose a new block-based fast image restoration using combined extrapolation and edge-tapering without boundary artifacts with reduced computational loads. We apply edgetapering to the inner blocks because they contain outside information of boundary. And outer blocks use half-convolution extrapolation. For this process it is possible that fast image restoration without boundary artifacts.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.12
• /
• pp.1942-1948
• /
• 2021

The cadastre in Korea was established with the outdated technology of the Japanese colonial period, and thus currently 15% of the Korea domestic land does not match the cadastral map. Accordingly, the government has been establishing the Korean cadastre under the name of 'Cadastral Re-investigation Project' and is changing the origin of the survey to the world geodetic system. Assuming that the project is completed, we propose a drone boundary survey method that can be used to easily survey using the exact digital cadastral information. The developed mobile GCS application can control the drone and acquire the boundary point coordinates recorded in the cadastre, and the drone automatically flies to mark the boundary points. The developed prototype of drone made a tour along the 6 boundary points in 2 minutes.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.4 no.5
• /
• pp.997-1003
• /
• 2000

When finite length signal is the input of QMF banks which are composed of the M-band orthogonal wavelet filter, the boundaries of reconstructed signal are not reconstructed perfectly. For boundary signals to be reconstructed perfectly, different type filters or methods are applied to them. In this paper, the design method of boundary filters which can be reconstructed the boundary signal perfectly was proposed, in case the dimension of M-band decomposed signal is the same as that of input signal. The boundary filters were designed using the perfect reconstruction condition of paraunitary matrix. In an application of subband coding of still image, the proposed boundary filters achieve better PSNR about 5% in reconstructed image than reflected method at the same bit rate.