• Journal of Information Display
• /
• v.12 no.4
• /
• pp.167-171
• /
• 2011

The angular distribution of the luminance on each optical component of 40-inch light-emitting diode backlight was measured and studied, using the optical-simulation method. Several scattering functions were investigated as the reflection distribution function of the scattering dots printed on the bottom surface of the light guide plate (LGP). It was found that both the diffuse Lambertian and near-specular Gaussian scattering functions were necessary for the successful reproduction of the experimental angular distribution of the luminance. The optimization of the scattering parameters included in these scattering functions led to almost the same luminance distribution as that obtained from the experiment. This approach may be an effective way of indirectly estimating the reflection distribution function of the scattering dots of the LGP, which cannot be made accessible through any other experimental method.

• The Journal of the Acoustical Society of Korea
• /
• v.34 no.6
• /
• pp.444-454
• /
• 2015

Measurements of bottom backscattering strengths in a frequency range of 6-14 kHz were made on the shallow water off the southern Gyeonggi Bay in Yellow Sea in May 2013, as part of the KIOST-HYU joint acoustics experiment. Geological surveys for the experimental area were performed using multi-beam echo sounder, sparker system, and grab sampling to investigate the bottom topography, sub-bottom profile and composition of surficial sediment, respectively. In this paper, the backscattering strengths as a function of grazing angle (in range of $28^{\circ}{\sim}69^{\circ}$) were estimated and compared to the predictions obtained by Lambert's law and APL-UW scattering model. Finally, the effects of geoacoustic parameters corresponding to the experimental area on the backscattering strengths are discussed.

• Journal of electromagnetic engineering and science
• /
• v.2 no.2
• /
• pp.65-67
• /
• 2002

An approximate, numerically-efficient solution for a microstrip T-junction is discussed. The microstrip T-junction is modeled as a rectangular waveguide with top/bottom electric walls and side magnetic walls. Comparisons of our solution with others show favorable agreements.

• Journal of the Korean earth science society
• /
• v.23 no.8
• /
• pp.707-721
• /
• 2002

Seafloor acoustic image data using the side scan sonar system were gathered on the Sindu-ri offshore near the Taean peninsula, middle western Korea. The relationship between the back-scattering acoustic intensity and the sea-bottom sediment properties was studied. And these two data sets were compared and interpreted with the water depth, respectively. Most of sediment properties were correlated well to the acoustic intensity, however the distribution patterns of the sea-bottom sediment and the seafloor acoustic image were not similar to each other except the rocky bottom area. The water depth was not only influential on the distribution pattern of seafloor acoustic image but also showed a linear relation with the sediment properties distribution.

• Journal of applied mathematics & informatics
• /
• v.27 no.5_6
• /
• pp.1017-1031
• /
• 2009

The problem of interaction of surface water waves by small undulation at the bottom of a laterally unbounded sea is treated on the basis of linear water wave theory for both normal and oblique incidences. Perturbation analysis is employed to obtain the first order corrections to the reflection and transmission coefficients in terms of integrals involving the shape function c(x) representing the bottom undulation. Fourier transform method and residue theorem are applied to obtain these coefficients. As an example, a patch of sinusoidal ripples is considered in both the cases as the shape function. The principal conclusion is that the reflection coefficient is oscillatory in the ratio of twice the surface wave number to the wave number of the ripples. In particular, there is a Bragg resonance between the surface waves and the ripples, which is associated with high reflection of incident wave energy. The theoretical observations are validated computationally.

• Journal of Korean Port Research
• /
• v.9 no.1
• /
• pp.57-63
• /
• 1995

In this paper we examine the mass transport within the boundary layer near the sea bottom. The fluid domain is seperated into inner and outer region of boundary layers. In outer region, the wave field is assumed to be inviscid and irrotational. When the incident waves enter the arrays of circular cylinders, the scattering of water waves by an array of N bottom mounted vertical circular cylinders is solved using the method proposed by Linton & Evans under the potential theory. In inner region, the Navier-Stokes equation must be satisfied with boundary conditions at the boundary later and bottom is to be represented by the sum of the Eulerian mean drift and the Stokes' drift.

• The Journal of the Acoustical Society of Korea
• /
• v.25 no.8
• /
• pp.389-394
• /
• 2006

Mid-Frequency bistatic reverberation level is modeled using ray theoretic algorithms. The algorithm assumes multiple forward/backward scatter along with reciprocity in the Propagation paths. The environments modeled are assumed to be range independent in bathymetry, bottom scattering and surface scattering. Mid-Frequency bistatic scattering algorithm is used as a scattering model. A comparison of predicted reverberation versus time with measured data is presented to verify the bistatic reverberation model. The result demonstrates that it is possible to obtain reasonable reverberation Predictions in experimental site.

• The Journal of the Acoustical Society of Korea
• /
• v.28 no.8
• /
• pp.740-754
• /
• 2009

Sound in the ocean is scattered by inhomogeneities of many different kinds, such as the sea surface, the sea bottom, or the randomly distributed bubble layer and school of fish. The total sum of the scattered signals from these scatterers is called reverberation. In order to simulate the reverberation signal precisely, combination of a propagation model with proper scattering models, corresponding to each scattering mechanism, is required. In this article, we develop a reverberation model based on the ray theory easily combined with the existing scattering models. Developed reverberation model uses (1) Chapman-Harris empirical formula and APL-UW model/SSA model for the sea surface scattering. For the sea bottom scattering, it uses (2) Lambert's law and APL-UW model/SSA model. To verify our developed reverberation model, we compare our results with those in Ellis' article and 2006 reverberation workshop. This verified reverberation model SNURM is used to simulate reverberation signal for the neighboring seas of South Korea at mid frequency and the results from model are compared with experimental data in time domain. Through comparison between experiment data and model results, the features of reverberation signal dependent on environment of each sea is investigated and this analysis leads us to select an appropriate scattering function for each area of interest.

• Journal of the Optical Society of Korea
• /
• v.17 no.3
• /
• pp.275-278
• /
• 2013

The effect of the wavelength-dependent scattering on the change of the color chromaticity in the lightguide panel of a liquid crystal display is examined. The white light emitted from the white LEDs located at the edge of the lightguide propagates in the lightguide and is scattered by the patterned dots that are placed on the bottom of the lightguide. The scattered lights that are far from the LEDs showed reddish color compared to the bluish color that is scattered from the near area from the LEDs. The color difference was between 0.01 to 0.06 depending on the resin and the thickness of the lightguide.

• Proceedings of the KIEE Conference
• /
• 1987.07a
• /
• pp.78-81
• /
• 1987

The scattering characteristics are analysed for the dielectric cylinder with arbitrary cross section partially covered by thin conductors. The integro differential equations consistant with boundary conditions of conductor and dielectric boundaries are derived by the equivalence principle. They are transformed into matrix equations by moment method. The circular dielectric cylinder covered by conductors at the upper and bottom side of the cylinder is chosen for the numerical example. Current distributions on conductors and scattering cross section by the cylinder are computed for incident wave perpendicular to the conductor plane.