• Korean Journal of Food Science and Technology
• /
• v.10 no.4
• /
• pp.404-408
• /
• 1978

This experiment was carried out to study the characteristics and composition of the oil extracted from elder berry seeds. The results obtained were summarized as follows. 1. The elder berry fruits are composed of $1.56%{\sim}2.50%$ crude lipid, $2.50{\sim}6.10%$ crude protein, $0.7{\sim}1.3%$ crude ash, 0.73% pectin and the fresh whole fruits bore $6{\sim}7%$ of its seeds on weight basis. 2. The hot pressed oil had similar flavor and taste to sesame oil, and cold, pressed one, to olive oil. Its iodine value ranged $95{\sim}110$, and its oil extraction rate from seed $26.18{\sim}26.55%$. 3. The elder berry seed oil contained a high level of essential fatty acids, and the oil seed cakes, $12.65{\sim}18.65%$ of crude protein. These may be utilized as concentrated fodder for livestock.

• The Korean Journal of Mycology
• /
• v.45 no.3
• /
• pp.188-195
• /
• 2017

Despite the high commercial value of the pine mushroom (Tricholoma matsutake) around the world, its production still depends upon natural harvesting. In recent years, mushroom researchers in Korea and Japan have been successful in artificially cultivating T. matsutake by producing single mushroom through matsutake-infected pine seedlings. In this study, we determined the minimum seedling height required for the survival of matsutake mycelia in the infected pine seedlings in the field. The survival rate of matsutake mycelia in the matsutake-infected pine seedlings was 50% (14) in two years and 71% (10) in one year after their transplantation. The average height at time of transplantation of the matsutake-infected pine seedlings that bore surviving mycelia after transplantation was 25 cm (minimum 12 cm to maximum 40 cm). In conclusion, the matsutake mycelium of matsutake-infected pine seedlings was able to survive in field conditions if the height of the seedling at the time of T. matsutake infection was at least 12 cm. These results suggest that the height of the host plants used in conventional matsutake-infected pine seedling production should be greatly reduced to improve the matsutake cultivation. Therefore, standardization of the seedling height for artificial cultivation of pine mushrooms by the matsutake-infected pine seedling method is suggested.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.7
• /
• pp.854-867
• /
• 2014

In the circumstance that high oil price state is continued over the world, the investment in crude oil development by oil major is a trend of increasing. Recently the number of delivered drill-ship for 5 years has been sharply increased all over the world and about twice than that of past 30 years. As addition to the increase of the drill-ship demand, the operation of drill-ships which is delivered recently is about 3,000 meters, ultra deep sea, on average and the work area is expending. Accordingly the drilling system including the size and length of pipe for drilling has been bigger and bigger and the power supply equipment for operation system also has large capacity. Unlike merchant vessel, high power and high voltage of diesel generators are required for drill-ship for which the demand for V-type 320 bore of diesel generator has increased. It is on the raised that the importance of lubrication oil cleaning for diesel generator on drill-ship which has longer time for construction, and also long term low load operation is unavoidable during commissioning of equipments. Recently it was reported that engine crankpin was damaged due to the hard contact caused by the abnormal wear down(Cam wear) on crankpin and bearing. The same pattern of wear down was found through the inspection on series vessels and the other vessel under commissioning. The purpose of this paper is to analyze of the wear mechanism based on the observation and theories and objective research from actual cases and to prepare the counter measures to avoid foreseeable damage when the lubricating oil is not properly cleaned.

• Journal of Chest Surgery
• /
• v.39 no.5 s.262
• /
• pp.394-398
• /
• 2006

Background: Goal of the initial treatment of primary spontaneous pneumothorax is re-expansion of the lung by evacuation of air from pleural space. Authors thought small caliber catheter could reach to this goal instead of conventional large bore chest tube. This retrospective study was undertaken to assess the effectiveness of 7-French (Fr) catheter for the initial treatment of primary spontaneous pneumothorax. Material and Method: Between May 2003 and April 2005, 111 patients with primary spontaneous pneumothorax were managed with tube drainage; 7 Fr catheter for 86 patients and 24-French chest tube for 25 patients. We analyzed catheter indwelling time, use of analgesics, re-expansion of the lung, and catheter related problems by medical records. Result: Mean catheter indwelling time was $2.4{\pm}1.1$ days in 7 Fr group and $2.3{\pm}1.3$ days in chest tube group (p>0.05). All patients with 24 Fr catheter needed analgesics injection but never in 7Fr group. Complete re-expansion of the lung based on plane chest radiograph was obtained in 77% of 7 Fr group. The problem related with 7 Fr catheter was kinking, which showed in 5.6%. Conclusion: Application of the 7 Fr catheter for initial management of primary spontaneous pneumothorax was as effective as 24 Fr catheter.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.8
• /
• pp.44-54
• /
• 2018

Stress and fatigue of the distributor, an equipment of the high-pressure evaporator for the HRSG, were evaluated according to ASME Boiler & Pressure Vessel Code Section VIII Division 2. First, from the results of the piping system analysis model, reaction forces of the tubes connected to the distributor were derived and used as the nozzle load applied to the detailed analysis model of the distributor afterward. Next, the detailed model to analyze the distributor was constructed, the distributor being statically analyzed for the design condition with the steam pressure and the nozzle load. As a result, the maximum stress occurred at the bore of the horizontal nozzle, and the primary membrane stress at the shell and nozzle was found to be less than the allowable. Next, for the transient operating conditions given for the distributor, thermal analysis was performed and the structural analysis was carried out with the steam pressure, nozzle load, and thermal load. Under the transient conditions, the maximum stress occurred at the vertical downcomer nozzle, and of which fatigue life was evaluated. As a result, the cumulative usage factor was less than the allowable and hence the distributor was found to be safe from fatigue failure.

• Journal of the Korean Society for information Management
• /
• v.27 no.3
• /
• pp.15-34
• /
• 2010

In this study we determine the level of awareness among academic librarians of ten technological tools as outlined in American Libraries. Towards this end, we conducted a survey targeting 156 academic librarians in 25 Korean university libraries. Questionnaires were designed to determine both the viability and level of acceptance of the ten technological proposals in question. Conclusions drawn after analyzing the responses to the survey were as follows: 1) Customer service can be improved by first drawing up a list of technological skills required for staff members. Methods to develop the cataloging service to more closely match individual user preferences and the use of SMS to send alerts proved to be the proposals, of the ten that were proposed, that not only bore the greatest necessity but also proved to be the most effective once they were implemented. 2) Proposals that proved to be the most difficult to implement were: Using technology to improve the cataloging service to make it more capable of evolving according to the individual preferences of users; the special event wiki for users; and improvements in customer service arising from identifying and drawing up a list of technological skills required for staff members.

• Korean Journal of Veterinary Research
• /
• v.26 no.1
• /
• pp.187-194
• /
• 1986

The purpose of this study is to develop a new method which enables the goat ESR to be used as an effective clinical test. Blood samples were taken from 61 Korean native goats aged above one year old and the effect of tube inclinations, tube bores, tube lengths, environmental temperatures during tests and packed erythrocyte volumes (PCV) on the ESR were observed. The results were summarized as follows. 1. The ESR/hr using capillary hematocrit tube (Micro-Ht-tube) was gradually increased as the tube angle inclined from 90 (vertical) to 15 degrees and the best angle in view of both security and fast sedimentation rate was found to be an angle of 45 degrees. 2. The 45-degree angled ESR ($45^{\circ}$-ESR) increased as the diameter of tube bore decreased. 3. The tube length did not affect the $45^{\circ}$-ESR in percent. 4. The $45^{\circ}$-ESR increased with the increased environmental temperature during the ESR test. 5. The heparinized Micro-Ht tubes did not affect the $45^{\circ}$-ESR of EDTA-blood in healthy group but in anemic group. In the anemic group, the ESRs by the heparinized Micro-Ht-tubes were slightly higher than those by non-heparinized Micro-Ht-tubes. 6. By using the autologous plasma, PCV of the blood was adjusted to be 10, 20, 30, 40 and 50ml/100ml and $45^{\circ}$-ESRs were determined in the Micro-Ht-tubes. The $45^{\circ}$-ESRs increased as the values of PCV decreased. The regression of the $45^{\circ}ESR$ to PCV was curvilinear with the second degree polynomial, $Y=42.1838-1.7355X+0.0180X^2$(r=0.9997). 7. The $45^{\circ}$-ESR/hr, using non-heparinized Micro-Ht-tubes at $20^{\circ}C$, was determined in 35 healthy Korean native goats. The average PCV was $30.6{\pm}1.4ml/100ml$. The observed ESR values averaged $6.8{\pm}1.7%$ and the corrected ESR values to the standard PCV of 31ml/100ml averaged $6.5{\pm}1.2%$. From these results, the angled capillary tube method was found to be desirable ESR test of goat blood in which EDTA-blood is filled in nonheparinized Micro-Ht-tubes held at an angle of 45 degrees for an hour at $20^{\circ}C$.

• Journal of the Korean Chemical Society
• /
• v.25 no.4
• /
• pp.275-282
• /
• 1981

A simple semiquantitative procedure was developed for the determination of sub-ppm level of chromium(VI) in aquatic samples by using an analytical micro-column packed with diphenylcarbazide(DPC) gel beads. DPC gel beads were prepared by swelling XAD-2 resin(115∼150 mesh in dry condition) in ethanol for 10min, packing into a glass column(1.5 mm bore, 65nm length) and adsorbing 1ml of ethanol solution of $2{\times}10^{-3}M$ DPC for 20min at room temperature. When 0.5ml of ethanol solution containing chromium(VI) was passed through the DPC gel column for 40min, the original white color of the reagent gel turned to red-violet from the up-stream of the column. As the length of colored band was proportional to the total amount of chromium(VI) in the sample solution passed through the column, the concentration of chromium(VI) could be determined from the calibration line which had been prepared by using the standard solution. Chromium(VI) ion as small as from 0.1 to 0.8 ppm could be determined with ${\pm}5{\sim}{\pm}15{\%}$ relative errors. Since other interfering cations were few, 100-fold excess of Fe(III), 50-fold excess of Cu(II) could be masked with EDTA. This method was successfully applied to the analysis of chromium(VI) in industrial effluents.

• Korean Journal of Child Studies
• /
• v.3
• /
• pp.63-81
• /
• 1982

The purpose of this study is to relate social behaviors and child-rearing practices to the popularity of preschool children in Korea. Specifically, four major questions were raised and studied First, the relationship between a child's popularity and his/her social behaviors was examined. Second, this relationship was explored as a function of the child's sex. Third, the relationship between a child's popularity and maternal childrearing practices was investigated. Fourth, this relationship was explored as a function of the child's sex. The subjects of this study were 113 middle class preschool aged children and their mothers. Sociometric choices and peer-perceived social behaviors were obtained from these children using Moore's (1973) Sociometric Status Test. Mothers of these children described their childrearing practices in a Q-sort format of Child-Rearing Practices Report (CRPR) developed by Block (1965). The analyses of the data using Kendall's Tau Correlation Coefficient bore the following results: 1. Patterns of social behaviors shown by either popular or unpopular children were distinct; Popular children were friendly and conformative, while unpopular children were aggressive, non-conformative and independent. 2. Patterns of social behaviors in relation to the popularity and the unpopularity differed as a function of the child's sex; Popular boys tended to be active while popular girls were likely to be unaggressive, independent and not-teasing. Unpopular boys showed a great amount of discipline their daughters by means of non-punitive punishment and to express negative reaction to the sibling rivalry among their children. These mothers tended not to enjoy their 3. Certain patterns of maternal child-rearing practices tended to be related to the popularity status of the child; The mothers of popular children as compared to those of unpopular children enjoyed their roles as mothers and didn't use non-punitive punishment. 4. Patterns of maternal child-rearing practices in relation to the child's popularity and unpopularity differed as a function of the child's sex; The mothers of popular boys unlike those of popular girls tended to emphasize on their sons' achievement and perceived that their husbands were greatly involved with their sons. The mothers of unpopular boys appeared to show negative affection toward their sons. The mothers of unpopular girls were likely to displine their daughters by means of non-punitive punishment and to express negative reaction to the sibling rivalry among their children. These mothers tended not to enjoy their roles as mothers and did not believe that their daughters would behave as they should.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.39 no.5
• /
• pp.16-22
• /
• 2002

This paper suggests the optimum processing conditions for obtaining good quality $P^{+}$-n shallow junctions formed by pre-amorphization and furnace annealing(FA) to reflow BPSG(bore phosphosilicate glass). $BF_2$ions, the p-type dopant, were implanted with the energy of 20keV and the dose of 2$\times$10$^{15}$ cm$^{-2}$ into the substrates pre-amorphized by As or Ge ions with 45keV, 3$\times$$10^{14}$ $cm^{-2}$. High temperature annealings were performed with a furnace and a rapid thermal annealer. The temperature range of RTA was 950~$1050^{\circ}C$, and the furnace annealing was employed for BPSG reflow with the temperature of $850^{\circ}C$ for 40 minutes. To characterize the formed junctions, junction depth, sheet resistance and diode leakage current were measured. Considering the preamorphization species, Ge ion exhibited better results than As ion. Samples preamorphized with Ge ion and annealed with $1000^{\circ}C$ RTA showed the most excellent characteristics. When FA was included, Ge preamorphization with $1050^{\circ}C$ RTA plus FA showed the lowest product of sheet resistance and junction depth and exhibited the lowest leakage currents.