• Journal of Periodontal and Implant Science
• /
• v.46 no.4
• /
• pp.277-287
• /
• 2016

Purpose: The purpose of this study was to evaluate the clinical efficacy of enhancing deficient interdental papilla with hyaluronic acid gel injection by assessing the radiographic anatomical factors affecting the reconstruction of the interdental papilla. Methods: Fifty-seven treated sites from 13 patients (6 males and 7 females) were included. Patients had papillary deficiency in the upper anterior area. Prior to treatment, photographic and periapical radiographic standardization devices were designed for each patient. A 30-gauge needle was used with an injection-assistance device to inject a hyaluronic acid gel to the involved papilla. This treatment was repeated up to 5 times every 3 weeks. Patients were followed up for 6 months after the initial gel application. Clinical photographic measurements of the black triangle area (BTA), height (BTH), and width (BTW) and periapical radiographic measurements of the contact point and the bone crest (CP-BC) and the interproximal distance between roots (IDR) were undertaken using computer software. The interdental papilla reconstruction rate (IPRR) was calculated to determine the percentage change of BTA between the initial and final examination and the association between radiographic factors and the reconstruction of the interdental papilla by means of injectable hyaluronic acid gel were evaluated. Results: All sites showed improvement between treatment examinations. Thirty-six sites had complete interdental papilla reconstruction and 21 sites showed improvement ranging from 19% to 96%. The CP-BC correlated with the IPRR. More specifically, when the CP-BC reached 6 mm, virtually complete interdental papilla reconstruction via injectable hyaluronic acid gel was achieved. Conclusions: These results suggest that the CP-BC is closely related to the efficacy of hyaluronic acid gel injection for interdental papilla reconstruction.

• Journal of Periodontal and Implant Science
• /
• v.34 no.4
• /
• pp.699-709
• /
• 2004

The present study was performed to evaluate histomorphological difference in various surface-treated implants in beagle. Implants($Implantium^{(R)}$, Dentium Co. Korea) with pure titanium machined surface, acid treated surface, and $Al_2O_3(50{\sim}100\;{\mu}m)$blasted with acid treated surface were used in this study. All mandibular premolars of $1.5{\sim}2$ year old male beagle dogs were extracted. At 3 months after extraction, the implants(${\Phi}$ 4mm, l 6mm) were installed. The beagle were sacrificed at 1, 3 months after installation and then tissues including implants were prepared for non-decalcified specimens. These specimens were analyzed comparatively under light microscope. The results of this study were as follow 1. Higher rate of osseointegration were showed in the $Al_2O_3(50{\sim}100\;{\mu}m)$blasted with acid-treated surface. 2. Increased osseointegration were showed in the $Al_2O_3(50{\sim}100\;{\mu}m)$blasted with acidtreated surface with time. 3. Higher maturation of integration were showed in the $Al_2O_3(50{\sim}100\;{\mu}m)$blasted with acid-treated surface. In conclusion, surface treatment of $Al_2O_3blasted$ with acid might be considered to shorten healing time and improve success rate as increasing contact of implant and bone.

• The korean journal of orthodontics
• /
• v.47 no.4
• /
• pp.229-237
• /
• 2017

Objective: The aim of this study was to compare the initial stability as insertion and removal torque and the clinical applicability of novel orthodontic zirconia micro-implants made using a powder injection molding (PIM) technique with those parameters in conventional titanium micro-implants. Methods: Sixty zirconia and 60 titanium micro-implants of similar design (diameter, 1.6 mm; length, 8.0 mm) were inserted perpendicularly in solid polyurethane foam with varying densities of 20 pounds per cubic foot (pcf), 30 pcf, and 40 pcf. Primary stability was measured as maximum insertion torque (MIT) and maximum removal torque (MRT). To investigate clinical applicability, compressive and tensile forces were recorded at 0.01, 0.02, and 0.03 mm displacement of the implants at angles of $0^{\circ}$, $10^{\circ}$, $20^{\circ}$, $30^{\circ}$, and $40^{\circ}$. The biocompatibility of zirconia micro-implants was assessed via an experimental animal study. Results: There were no statistically significant differences between zirconia micro-implants and titanium alloy implants with regard to MIT, MRT, or the amount of movement in the angulated lateral displacement test. As angulation increased, the mean compressive and tensile forces required to displace both types of micro-implants increased substantially at all distances. The average bone-to-implant contact ratio of prototype zirconia micro-implants was $56.88{\pm}6.72%$. Conclusions: Zirconia micro-implants showed initial stability and clinical applicability for diverse orthodontic treatments comparable to that of titanium micro-implants under compressive and tensile forces.

• The Journal of Churna Manual Medicine for Spine and Nerves
• /
• v.2 no.1
• /
• pp.99-114
• /
• 2007

Objectives : The purpose of this study was to introduce the Chuna Manual Therapy (CMT) using Bong (a type of stick which is called 'bong') as a part of Oriental Medicine. Methods : We searched several traditional methods of CMT using Bong, either individual contact to specialist of CMT using Bong or referred to publications, and summarized briefly for introduction. Authors also made a comparative study between existing CMT and CMT using the bong. Results & Conclusions : The indications of Bong CMT are regarded as acute or chronic pain syndrome, whiplash associated disorders, facet syndrome, vertebral misalignment, chronic fatigue syndrome, obesity and also lower extremity length difference caused by malalignment of vertebrae and pelvic bone. The Meridian Muscle Therapy by pressing down using the Bong can be carried out on the imbalances of the muscle by shortening and lengthening contraction. CMT with Bong is considered more effective than other existing CMT in terms of effectiveness. In the case of pelvic correction which needs a tremendous amount of force, it can reduce the force required effectively. This fact can be inferred by the theory of composition and decomposition of force during the transmission of power. We can perform Bong CMT feeling less fatigued subsequently than general CMT. Pressing down with flexed fingers to grip bong acts on the contraction of flexor digiti and extensor digiti muscle, this protects the $doctor^{\circ}{\emptyset}s$ wrist joints from injury. The bong which acts as a tool between the doctor and the patient, while being given treatment, absorbs and spreads out the direct impact from the patient to the doctor. CMT with Bong is able to apply to both existing massage therapies with the hand. The bong appliance can be used in all applications, particularly, but not limited to; Orthopedic and Manual Correction Therapy, Meridian Muscle Pressing, Exercise Therapy, and Meridian Point Manual Pressing Therapy. CMT with Bong belongs to the category of oriental rehabilitation and Chuna manual medicine.

• Journal of the Korean Arthroscopy Society
• /
• v.6 no.1
• /
• pp.60-63
• /
• 2002

Purpose : The purpose of this study was to introduce new femoral fixation technique using a cross-pin and a bioabsorbable interference screw in hamstring ACL reconstruction. Method : Semitendinosus and gracilis were harvested for quadrapled graft. After tibial tunnel had been made, femoral tunnel was made 35 mm in depth. Then the graft passed through the tunnels. Cross-pin was fixed through the drill hole which had been made through upper sleeve of the Rigidfix system. While pulling the graft, bioabsorbable interference screw was fixed through the anteromedial portal. Conclusion : We introduced the new femoral fixation technique using a cross-pin and a bioabsorbable interference screw as a good method with high fixation strength and tight graft-bone contact.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.30 no.2
• /
• pp.150-157
• /
• 2008

This study evaluated the influence of smooth and brushite-coated implant surfaces in dogs. The first through fourth mandibular premolars were extracted from eight young adult dogs. Twelve weeks after extraction. implantation was performed at the extraction sites. In total, 40 implant fixtures were implanted in the dog mandibles. Twenty machined implants served as controls and twenty brushite-coated surfaces served as tests. Dogs were sacrificed 2 and 4 weeks after implantation. The hemi-mandibles were obtained and processed histologically to obtain non-decalcified sections. Longitudinal sections of each implant were made and analyzed using light microscopy. The overall implant success rate was 83.3%. Histomorphometrically. the experimental group had a better percentage of bone-implant contact than the control group (p<0.05) and there was a significant difference between the 2- and 4-week groups after implantation (p<0.05) Our results suggest that the implant surface morphology influences the increase in peri-implant osteogenesis in the early period of peri-implant healing.

• Imaging Science in Dentistry
• /
• v.35 no.4
• /
• pp.231-234
• /
• 2005

Coronoid impingement can cause limitation of mouth opening. In many cases, it appears to be related to the coronoid hyperplasia. We present a case of mouth opening limitation caused by coronoid impingement on the posterior surface of the zygomatic bone without coronoid hyperplasia. The bony changes in coronoid and zygoma including surface irregularity and discontinuity of the cortex and sclerotic change of inner medullary space were noted on computed tomography (CT) scans in different level of axial planes. Through another CT scans in open mouth position could demonstrate that those bony changes were caused by the contact of both surfaces against each other. In case coronoid impingement is suspected of the many possible causes, the open mouth CT scans will be needed to reveal the direct impingement of coronoid on zygoma even without coronoid hyperplasia.

• The Academic Congress of Korean Shoulder and Elbow Society
• /
• 2009.03a
• /
• pp.162-162
• /
• 2009

After preparation of the bone bed, two doubly loaded suture anchors with suture eyelets are inserted at the articular margin of the greater tuberosity. A retrograde suture-passing instrument penetrates the rotator cuff to retrieve the sutures through the modiWed Neviaser or subclavian portal. An ipsilateral pair of suture eyelets in the suture anchor is passed through the margins of the rotator cuff tear. The blue suture of the second and third pair is pulled out of the lateral cannula, and the threaded blue suture of the third pair in the needle is passed through the blue suture of the second pair. After retrieving the blue suture of the firrst pair through the anterior portal, it is pulled out to pass the blue suture of the third pair through the eyelet of the anteromedial anchor. The blue suture is linked between two anchors. The medial row of suture bridge is repaired with a sliding knot, and the sutures are not cut. Once the rotator cuff repair using the suture-bridge technique has been performed, the two blue strands in the anterior portal are tied. We describe our technique that possesses the advantages of both the double-pulley and suturebridge techniques, which improves the pressurized contact area and maximizes compression along the medial row.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2018.06a
• /
• pp.23-23
• /
• 2018

In this study, new titanium alloys were prepared by adding elements such as tantalum (Ta), zirconium (Zr) and the like to complement the biological, chemical and mechanical properties of titanium alloys. The Ti-40Ta-xZr ternary alloy was formed on the basis of Ti-40Ta alloy with the contents of Zr in the contents of 0, 3, 7 and 15 wt. %. Plasma electrolytic oxidation (PEO), which combines high-voltage sparks and electrochemical oxidation, is a novel method to form ceramic coatings on light metals such as Ti and its alloys. These oxide film produced by the electrochemical surface treatment is a thick and uniform porous form. It is also composed of hydroxyapatite and calcium phosphate-based phases, so it has the characteristics of bone inorganic, non-toxic and very high bioactivity and biocompatibility. Ti-40Ta-xZr alloys were homogenized in an Ar atmosphere at $1050^{\circ}C$ for 1 hour and then quenched in ice water. The electrochemical oxide film was applied by using a power supply of 280 V for 3 minutes in 0.15 M calcium acetate monohydrate ($Ca(CH_3COO)_2{\cdot}H_2O$) and 0.02 M calcium glycerophosphate ($C_3H_7CaO_6P$) electrolyte. A small amount of 0.0075M zinc acetate and magnesium acetate were added to the electrolyte to enhance the bioactivity. The mechanical properties of the coated surface of Ti-40Ta-xZr alloys were evaluated by Vickers hardness, roughness test, and elastic modulus using nano-indentation, and the surface wettability was evaluated by measuring the contact angle of the coated surface. In addition, cell activation and differentiation were examined by cell culture of HEK 293 (Human embryonic kidney 293) cell proliferation. Surface properties of the alloys were analyzed by scanning electron microscopy(FE-SEM), EDS, and X-ray diffraction analysis (XRD).

• Journal of the Korea Society of Computer and Information
• /
• v.12 no.5
• /
• pp.285-292
• /
• 2007

This study was developed the metallic plate for fixation in the femur fracture for the orthopedic region and rigid fixation with plates has a firm place in fracture treatment. Most plates can be used for rigid as well as biological and dynamical fracture fixation. The device's designation and sizing has a specific with bending structural stiffness and strength, known meaning that is reliable regardless of the plate by the short type and long type. Short plate have a wrapping of femur and long plate have to preserve a pole of femur. The bending strength of the curved metallic long plate has to evaluate a 11,000N and The bending strength of the curved metallic short plate has to evaluate a 6,525N. The tensile stress through to press a plate is $1573N/m^2\;and\;1539N/m^2$. The device can be used to support Revision case of Hip Implant and to use a case of Hip screw compression of Hip Neck Fracture.