Cross-Pin and Interference Screw Femoral Fixation in Anterior Cruciate Ligament Reconstruction using Hamstring Tendon -Technical Note-

슬괵건을 이용한 전방십자인대 재건술시 횡고정 핀과 간섭나사를 이용한 대퇴터널 고정술 -수술 수기-

  • In Yong (Department of Orthopaedic Surgery, Uijongbu St. May's Hospital, The Catholic University of Korea) ;
  • Bahk Won-Jong (Department of Orthopaedic Surgery, Uijongbu St. May's Hospital, The Catholic University of Korea) ;
  • Park Jong-Beom (Department of Orthopaedic Surgery, Uijongbu St. May's Hospital, The Catholic University of Korea) ;
  • Hong Seung-Hwan (Department of Orthopaedic Surgery, Uijongbu St. May's Hospital, The Catholic University of Korea)
  • 인용 (가톨릭대학교 의과대학 의정부성모병원 정형외과학교실) ;
  • 박원종 (가톨릭대학교 의과대학 의정부성모병원 정형외과학교실) ;
  • 박종범 (가톨릭대학교 의과대학 의정부성모병원 정형외과학교실) ;
  • 홍승환 (가톨릭대학교 의과대학 의정부성모병원 정형외과학교실)
  • Published : 2002.06.01

Abstract

Purpose : The purpose of this study was to introduce new femoral fixation technique using a cross-pin and a bioabsorbable interference screw in hamstring ACL reconstruction. Method : Semitendinosus and gracilis were harvested for quadrapled graft. After tibial tunnel had been made, femoral tunnel was made 35 mm in depth. Then the graft passed through the tunnels. Cross-pin was fixed through the drill hole which had been made through upper sleeve of the Rigidfix system. While pulling the graft, bioabsorbable interference screw was fixed through the anteromedial portal. Conclusion : We introduced the new femoral fixation technique using a cross-pin and a bioabsorbable interference screw as a good method with high fixation strength and tight graft-bone contact.

목적 : 네 겹의 슬괵건을 이용한 전방십자인대 재건술시 대퇴터널을 횡고정 핀과 흡수성 간섭나사로 함께 고정하는 수기를 소개하고자 한다. 수술 술기 : 반건양건과 박건을 채취하여 네 겹으로 준비하였다. 경골터널과 대퇴터널을 만드는데 대퇴터널의 깊이는 35 mm로 하였다. Rigidfix system의 가이드를 삽입하고 가이드의 위쪽 관에만 구멍을 내었다. 이식건을 통과시킨후 횡고정 핀 을 고정하였다. 이후 이식건을 경골쪽으로 당기면서 흡수성 간섭 나사로 고정하였다. 결론 : 슬괵건 전방십자인대 재건술시 횡고정 핀과 흡수성 간섭나사를 이용한 대퇴터널 고정은 강한 초기 고정과 이식건의 골통합을 촉진시킬 수 있는 좋은 방법으로 사료되어 소개하였다.

Keywords