• Journal of Periodontal and Implant Science
• /
• v.50 no.1
• /
• pp.56-66
• /
• 2020

Purpose: A stability-measuring device that utilizes damping capacity analysis (DCA) has recently been introduced in the field of dental implantology. This study aimed to evaluate the sensitivity and reliability of this device by measuring the implant stability of ex vivo samples in comparison with a resonance frequency analysis (RFA) device. Methods: Six implant beds were prepared in porcine ribs using 3 different drilling protocols to simulate various implant stability conditions. Thirty-six pork ribs and 216 bone-level implants measuring 10 mm in height were used. The implant beds were prepared using 1 of the following 3 drilling protocols: 10-mm drilling depth with a 3.5-mm-diameter twist drill, 5-mm drilling depth with a 4.0-mm-diameter twist drill, and 10-mm drilling depth with a 4.0-mm-diameter twist drill. The first 108 implants were external-connection implants 4.0 mm in diameter, while the other 108 implants were internal-connection implants 4.3 mm in diameter. The peak insertion torque (PIT) during implant placement, the stability values obtained with DCA and RFA devices after implant placement, and the peak removal torque (PRT) during implant removal were measured. Results: The intraclass correlation coefficients (ICCs) of the implant stability quotient (ISQ) results obtained using the RFA device at the medial, distal, ventral, and dorsal points were 0.997, 0.994, 0.994, and 0.998, respectively. The ICCs of the implant stability test (IST) results obtained using the DCA device at the corresponding locations were 0.972, 0.975, 0.974, and 0.976, respectively. Logarithmic relationships between PIT and IST, PIT and ISQ, PRT and IST, and PRT and ISQ were observed. The mean absolute difference between the ISQ and IST values on a Bland-Altman plot was -6.76 (-25.05 to 11.53, P<0.05). Conclusions: Within the limits of ex vivo studies, measurements made using the RFA and DCA devices were found to be correlated under a variety of stability conditions.

• Journal of Society of Preventive Korean Medicine
• /
• v.8 no.1
• /
• pp.89-107
• /
• 2004

This study was conducted to analyze community residents' behavior of Oriental medicine utilization and its related factors in order to provide basic data for formulation of policies on Oriental medicine. The subjects of this study was 500 residents who lived in big or medium sized cities and towns or villages Data were collected from March, 2002 to June, 2002. The results of this study can be summarized as follows. 1) According to socio-demographic characteristics of the respondents, female was 50.3%; 'over 50 years old' 29.9%, 'over college graduate' 39.7%, 'housewife' 23.0%, 'having spouse' 62.1%, 'Buddhist' 50.8%, 'living in big cities' 59.0%, 'middle economic class' 88.1%. 2) The highest proportion of frequency of Oriental medicine utilization was over 10 times(32.5%). The respondents visited Oriental medicine institutions for taking invigorant(51.1%), treatment of diseases in muscle or bone system(30.8%), treatment of diseases in digestive system(6.3%), etc. 3) According to the reasons of utilizing Oriental medicine, the proportion of good effect was highest(36.3%). 66.8% of the respondents replied that Oriental medical fee was expensive, while 0.8% of them replied that it was not expensive. 33.3% of them thought it was proper. 4) 35.5% of the respondents replied that treatment by Oriental medicine could cause side effect and 40.3% of them replied that the side effect could be caused by taking herb medicine. 5) 62.8% of the respondents replied that they would continuously receive opinions on Oriental medicine. The score of knowledge level of treatment by Oriental medicine $6.25{\pm}2.82$ points on the basis of 14 points. 6) The variables significantly influencing utilization of Oriental medicine includes taking diseases, living in big cities, male, upper (economic class, having religion, and effect of Oriental medicine. 7) The factors affecting effect of herb medicine were effect of treatment by Oriental medicine, marital status, knowledge level of Oriental medicine, having diseases, and frequency of receiving the treatment.

• Korean Journal of Applied Biomechanics
• /
• v.28 no.2
• /
• pp.101-108
• /
• 2018

Objective: The aim of this study was to investigate gender differences in ground reaction force (GRF) components among different speeds of running. Method: Twenty men ($age=22.4{\pm}1.6years$, $mass=73.4{\pm}8.4kg$, $height=176.2{\pm}5.6cm$) and twenty women ($age=20.7{\pm}1.2years$, $mass=55.0{\pm}8.2kg$, $height=163.9{\pm}5.3cm$) participated in this study. All participants were asked to run on an instrumented dual belt treadmill (Bertec, USA) at 8, 12, and 16 km/h for 3 min, after warming up. GRF data were collected from 30 strides while they were running. Hypotheses were tested using one-way ANOVA, and level of significance was set at p-value <.05. Results: The time to passive peaks was significantly earlier in women than in men at three different running speeds (p<.05). Further, the impact loading rates were significantly greater in women than in men at three different running speeds (p<.05). Moreover, the propulsive peak at 8 km/h, which is the slowest running speed, was significantly greater in women than in men (p<.05), and the vertical impulse at 16 km/h, which is the fastest running speed, was significantly greater in men than in women (p<.05). The absolute anteroposterior impulse at 8 km/h was significantly greater in women than in men (p<.05). In addition, as the running speed increased, impact peak, active peak, impact loading rate, breaking peak, propulsive peak, and anteroposterior impulse were significantly increased, but vertical impulse was significantly decreased (p<.05). Conclusion: The impact loading rate is greater in women than in men regardless of different running speeds. Therefore, female runners might be exposed to the risk of potential injuries related to the bone and ligament. Moreover, increased running speeds could lead to higher possibility of running injuries.

• Korean Security Journal
• /
• no.57
• /
• pp.85-110
• /
• 2018

The bodyguard is continuously training basic physical training and security art martial to protect the privacy of security target, prepare and deal with external contingencies and threats. Currently, university students majoring in security are required to take a judo class, one of their security art martial, which can use a technology to catch, crush and repress opponent. Therefore, this study identified the effects of systematic training on body composition, Performance fitness, growth hormones, and IGF-1 among male university students through a 10-week judo training program so that it was committed to providing objective data to enhance the value of judo as a security art martial and as a result, we have a conclusion as follows: After 10 weeks of judo training, muscle mass increased significantly, and body fat rate and BMI decreased significantly. The muscular strength and power of Performance fitness were shown to increase significantly, and growth hormones were shown to increase significantly. In total, the above results showed that for judo training university students, overall body composition improved positively, the muscular strength and power of active physical fitness improved, and growth hormones increased. Thus, the increase in muscle strength and growth hormones through judo training will encourage fat breakdown due to the development of the body's muscles and increase bone density in the spine, thereby reducing the risk of fractures and preventing injury to the trainees who are performing a security art martial. It will also greatly help your health by preventing obesity, cardiovascular and metabolic diseases, which eventually will enhance your bodyguard function and prolong your life as a bodyguard.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.42
• /
• pp.32.1-32.4
• /
• 2020

Background: Le Fort I osteotomy is a highly effective treatment for skeletal jaw deformities and is commonly performed. High Le Fort I osteotomy is a modified surgical procedure performed for improving the depression of the cheeks by setting the osteotomy higher than the conventional Le Fort I osteotomy. Developments in three-dimensional (3D) technology have popularized the use of 3D printers in various institutions, especially in orthognathic surgeries. In this study, we report a safe and inexpensive method of performing a high Le Fort I osteotomy using a novel 3D device and piezosurgery, which prevent tooth root injury without disturbing the operation field for patients with a short midface and long tooth roots. Results: A 17-year-old woman presented with facial asymmetry, mandibular protrusion, a short midface, and long tooth roots. We planned high Le Fort I osteotomy and bilateral sagittal split ramus osteotomy. Prevention of damage to the roots of the teeth and the infraorbital nerve and accurate determination of the posterior osteotomy line were crucial for clinical success. Le Fort I osteotomy using 3D devices has been reported previously but were particularly large in size for this case. Additionally, setting the fixing screw of the device was difficult, because of the risk of damage to the roots of the teeth. Therefore, a different surgical technique, other than the conventional Le Fort I osteotomy and 3D device, was required. The left and right parts of the 3D device were fabricated separately, to prevent any interference in the surgical field. Further, the 3D device was designed to accurately cover the bone surface from the piriform aperture to the infra-zygomatic crest with two fixation points (the anterior nasal spine and the piriform aperture), which ensured stabilization of the 3D device. The device is thin and does not interfere with the surgical field. Safe and accurate surgical performance is possible using this device and piezosurgery. The roots of the teeth and the infraorbital nerve were unharmed during the surgery. Conclusions: This device is considerably smaller than conventional devices and is a simple, low-cost, and efficient method for performing accurate high Le Fort I osteotomy.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.4
• /
• pp.513-519
• /
• 2021

Metallic suture anchors are very useful and common fixation devices that are inserted into the target bone to sustain the tendon of a patient with musculus supraspinatus tendon ruptures. On the other hand, the presence of a metallic material prosthesis, such as a metal suture anchor, causes severe MR imaging artifacts, including field distortion, signal loss, and failure of fat suppression. The difference in magnetic susceptibility between metal and other organic materials causes magnetic field distortion surrounding the prosthesis. The resulting magnetic field inhomogeneity makes the images with a lower signal-to-noise ratio and distortion. For a patient with a suture anchor implanted, MR imaging is the golden standard for determining the postoperative prognosis, and a fat-saturation sequence is one of the imaging methods most affected by metal-induced artifacts. In this study, three fat-saturation sequences were compared. Artifact quantification and contrast comparison between the supraspinatus tendon and the surrounding muscle were presented. The images obtained using the STIR pulse sequence showed fewer susceptibility artifacts and better visibility in the supraspinatus tendon and the tissue area. Therefore, the STIR sequence is the most appropriate fat-saturation imaging method for patients with a metallic prosthesis.

• Toxicological Research
• /
• v.35 no.1
• /
• pp.45-63
• /
• 2019

In view of the growing industrial use of Bacterial cellulose (BC), and taking into account that it might become airborne and be inhaled after industrial processing, assessing its potential pulmonary toxic effects assumes high relevance. In this work, the murine model was used to assess the effects of exposure to respirable BC nanofibrils (nBC), obtained by disintegration of BC produced by Komagataeibacter hansenii. Murine bone marrow-derived macrophages ($BMM{\Phi}$) were treated with different doses of nBC (0.02 and 0.2 mg/mL, respectively 1 and $10{\mu}g$ of fibrils) in absence or presence of 0.2% Carboxymethyl Cellulose (nBCMC). Furthermore, mice were instilled intratracheally with nBC or nBCMC at different concentrations and at different time-points and analyzed up to 6 months after treatments. Microcrystaline $Avicel-plus^{(R)}$ CM 2159, a plant-derived cellulose, was used for comparison. Markers of cellular damage (lactate dehydrogenase release and total protein) and oxidative stress (hydrogen peroxidase, reduced glutathione, lipid peroxidation and glutathione peroxidase activity) as well presence of inflammatory cells were evaluated in brochoalveolar lavage (BAL) fluids. Histological analysis of lungs, heart and liver tissues was also performed. BAL analysis showed that exposure to nBCMC or CMC did not induce major alterations in the assessed markers of cell damage, oxidative stress or inflammatory cell numbers in BAL fluid over time, even following cumulative treatments. $Avicel-plus^{(R)}$ CM 2159 significantly increased LDH release, detected 3 months after 4 weekly administrations. However, histological results revealed a chronic inflammatory response and tissue alterations, being hypertrophy of pulmonary arteries (observed 3 months after nBCMC treatment) of particular concern. These histological alterations remained after 6 months in animals treated with nBC, possibly due to foreign body reaction and the organism's inability to remove the fibers. Overall, despite being a safe and biocompatible biomaterial, BC-derived nanofibrils inhalation may lead to lung pathology and pose significant health risks.

• Annals of Pediatric Endocrinology and Metabolism
• /
• v.23 no.4
• /
• pp.210-214
• /
• 2018

Purpose: Premature adrenarche (PA) often leads to polycystic ovary syndrome (PCOS). Higher anti-mullerian hormone (AMH) levels are reported in PCOS. We studied the androgen profile and AMH profiles in Hispanic girls with PA (aged 5-8 years) and age and body mass index (BMI) matched controls. Methods: Retrospective review of electronic medical records of girls who met the inclusion criteria for premature adrenarche were done. Results: PA girls (n=76) were matched to control girls (n=12) for age (mean${\pm}$standard deviation) ($6.7{\pm}1years$ vs. $6.2{\pm}1.3years$) and BMI ($20{\pm}10kg/m^2$ vs. $17.8{\pm}2.7kg/m^2$). Dehydroepiandrostenedione sulfate ($63.3{\pm}51.3{\mu}g/dL$ vs. $29.8{\pm}17.3{\mu}g/dL$, P<0.001) and testosterone levels ($11.4{\pm}4.8ng/dL$ vs. $8.2{\pm}2.9ng/dL$, P=0.001) were significantly higher in the PA group than controls. AMH values (<14 years: reference range, 0.49-3.15 ng/mL) were $3.2{\pm}2.2ng/mL$ vs. $4.6{\pm}3.2ng/mL$ respectively in the PA and control groups and were not different (P=0.4). AMH did not show a correlation with bone age (P=0.1), and testosterone (P=0.9) in the PA group. 17-hydroxyprogesterone levels (17-OHP ng/dL) were $39.5{\pm}30.5ng/dL$ vs. $36.8{\pm}19.8ng/dL$ in PA versus control girls. The concentration of 17-OHP was not statistically different between the control and PA groups. Conclusion: Higher AMH was not observed in PA girls and no correlation with BA and androgen levels was observed.

• Journal of the Korean Society of Radiology
• /
• v.12 no.7
• /
• pp.833-844
• /
• 2018

Dual energy X-ray absorptiometry is mainly used as an X-ray test method. For equipment manufactured GE and Hologic, cross-calibration analyses (CCA) of machines from the same manufacturer and between units from different manufacturers have been conducted, but the CCA of equipment manufactured in Korea are inadequate. Through CCA, we present a formula of the intersections between the Korean medical equipment company (KEC) with GE and Hologic manufactured DXA, and among the KEC DXA. The CCA was conducted for the European Spine Phantom on DXA from four KEC and three global medical equipment company (GEC) manufacturers. We compared bone mineral density (BMD) values and calculated the CCA equation by linear regression analysis. The standard-deviations (SD) of the BMD values were highest for the Dexxum T for the low, medium, and high spine, which were 0.030, 0.029, and 0.037, respectively. The smallest SD in the low and medium vertebrae were 0.005 and 0.004 for the Horizon Ci, respectively, and 0.005 for the Osteo Pro Max in the high vertebrae. Based on the intersection equations of the KEC DXA established in this study, CCA of various KEC DXA should be established for more accurate follow-up of BMD tests in clinical environments.

• Korean Journal of Clinical Laboratory Science
• /
• v.51 no.3
• /
• pp.379-385
• /
• 2019

Osteoporosis is a disease that increases the risk of fractures by inducing a decrease in bone strength by the changes in hormones and a decrease in minerals. Recent reports have indicated that the long-term administration of Adefovir dipivoxil (ADV), which is used as a treatment for the hepatitis virus and AIDS, may have osteoporotic side effects. On the other hand, there are few studies on the cytopathic correlation of these causes. In this study, the biological relevance of ADV was evaluated using osteoblast hFOB1.19 and vascular endothelial cell HUVEC. First, the cells were treated with ADV at different concentrations, and DAPI and crystal violet staining were performed for morphological analysis of each cell and nucleus. A CCK-8 assay, real-time PCR, alkaline phosphatase (ALP) staining, and activity was performed to evaluate the drug effects on cell proliferation, gene expression, and osteoblast differentiation. As a result, ADV induced cell hypertrophy in hFOB1.19 cells and HUVEC cells. Furthermore, ADV not only inhibited cell proliferation and TGF-${\beta}$ expression but was also involved in osteoblast differentiation. Overall, these results provide basic data to help better understand the mechanism of ADV-induced osteoporosis and its clinical implications.