• 소성∙가공
• /
• 제28권1호
• /
• pp.15-20
• /
• 2019

The superplastic forming/diffusion bonding process has been developed to fabricate a core frame structure with joint nodes out of tubes, for the development of a titanium high performance bicycle. The hydroforming process has been applied for bulging of a tube in the superplastic condition before, and during the diffusion bonding process. In this experiment, a commercial Ti-3Al-2.5V tube was selected as raw material for the study. The forming experiment has been performed using a servo-hydraulic press with a capacity of 200 ton. Next, nitrogen gas was used to acquire necessary pressure for the bulging and bonding of the tubes to fabricate the joint nodes. The pertinent processing temperature was $870^{\circ}C$ for the superplastic hydroforming/diffusion bonding (SHF/DB) process, using the Ti-3Al-2.5V tube. The bonding quality and the progress of bulging and diffusion bonding have been observed by the investigation of the joining interfaces at the cross section of the joint structure. The control of the nitrogen pressure throughout the SHF/DB process, was an important factor to avoid any significant defects in the joint structure. The whole progress stage of the diffusion bonding could be observed at a joint interface. A core structure with 5 joint nodes to manufacture a titanium bicycle could be obtained in a SHF/DB process.

• 한국생산제조학회지
• /
• 제22권5호
• /
• pp.812-817
• /
• 2013

This study demonstrates the diffusion bonding process between a tungsten carbide shank (K30) and tungsten carbide (DX5) for micro WC-PCD tool fabrication. A type of nickel alloy was used as the filler met alto improve the bond ability between K30 and DX5. The bonding pressure, time, and surrounding conditions were kept constant. In particular, the normal pressure was controlled precisely under buckling analysis. Diffusion bonding was performed at various operation temperatures (1170-1770 K) by using a specially designed jig. The microstructure on the localized bonded surface was analyzed using scanning electron microscopy and optical microscopy. In the case of diffusion bonding of WCat 1370-1770K, the filler metal melted completely and diffused between the two base metals, and they were bonded more tightly on both sides than at temperatures below 1370 K. Our results demonstrated the importance of sensitive temperature dependence of diffusion bonding.

• 한국레이저가공학회:학술대회논문집
• /
• 한국레이저가공학회 2006년도 추계학술발표대회 논문집
• /
• pp.53-81
• /
• 2006

A COG(Chip on Glass) bonding process that is one of display packaging technology and bonds between driver IC chip and a glass panel using ACF(Anisotropic Conductive Film)has been investigated by using diode laser. This method is possible to raise cure temperature of ACF within one second and can reduce the total process time for COG bonding by a conventional method such as a hot plate. Also we can get good pressure mark on the surface of electrodes and higher bonding strength than that by convention method. Results show that laser COG bonding can give low pressure bonding and decrease a warpage of panel. We believe that it can be applied to fine pitch module.

• 한국생산제조학회지
• /
• 제9권4호
• /
• pp.41-47
• /
• 2000

In this study, the purpose finds out the best welding conditions for bonding of electric wire by ultrasonic welding. The material was plastic-insulating low-voltage-cabels for automobiles. The experiment varied the values of welding time and welding pressure and fixed the values of amplitude and energy. With the facts, the best condition for ultrasonic welding to achieve bonding exactly is gained according to the size of the cross-sectional area of the cable, and the adhesive intensity is greatly influenced by the variables of welding time and welding pressure. Also when the welding time and welding time and welding pressure increase as the cross-sectional areas of the cable increase the welding result in gained exactly.

• 대한기계학회논문집A
• /
• 제32권4호
• /
• pp.354-361
• /
• 2008

Cold rolled steel sheet for automotive was treated by Ar/$O_2$ atmospheric pressure plasma to improve the adhesive bonding strength. Through the contact angle test and calculation of surface free energy for cold rolled steel sheet, the changes of surface properties were investigated before and after plasma treatment. The contact angle was decreased and surface free energy was increased after plasma treatment. And the change of surface roughness and morphology were observed by AFM(Atomic Force Microscope). The surface roughness of steel sheet was slightly changed. Based on Taguchi method, single lap shear test was performed to investigate the effect of experimental parameter such as plasma power, treatment time and flow rate of $O_2$ gas. Results shows that the bonding strength of steel sheet treated in Ar/$O_2$ atmospheric pressure plasma was improved about 20% compared with untreated sheet.

• 한국재료학회지
• /
• 제11권3호
• /
• pp.159-163
• /
• 2001

실리콘 웨이퍼 직접 접합을 성공하기 위해서는 양호한 접합면을 구성하여야 하며, 이를 위해 접합면에서 발생하는 주요 결함 중 하나인 기포형 접합 결함을 억제하여야 한다. 본 연구에서는 접합면에서 발생하는 기포형 결함의 상온 접합 및 열처리 과정에서의 거동을 관찰하여 내부의 압력이 증가함을 직접 관찰할 수 있었다. 또한, 대기압 하의 열처리에서 결함이 발생하지 않는 $SiO_2$-$SiO_2$ 접합 웨이퍼가 진공에서의 열처리에서 결함이 발생하는 현상을 통해 기포형 결함의 내부 압력과 성장과의 관계를 실험을 통하여 증명할 수 있었다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2007년도 춘계학술대회 논문집
• /
• pp.332-335
• /
• 2007

The superplastic forming (SPF) has been widely used in the automotive and aerospace industry because it has great advantages to produce very light and strong components. Finite element method (FEM) is used to model the process of superplastic forming/diffusion bonding (SPF/DB), to predict the pressure-time curve and to analyze the process parameter. In this study, process design of SPF/DB is carried out a 3-sheet sandwich part. SPF/DB process with pressure control was analyzed by using finite element method. For obtaining proper shape, step-by-step pressurization is proposed. The first step of SPD/DB process is obtained by applying of pressure in patches. From the next step it applied pressure to all regions (between inner sheets, between inner and face sheets). By using the proposed pressurization scheme, deficit in part shape is found to be eliminated.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 춘계학술대회 논문집
• /
• pp.370-373
• /
• 1999

Si direct bonding (SDB) technology is very attractive for both Si-on-insulator(SOI) electric devices and MEMS applications because of its stress free structure and stability. This paper presents on- pre treatment conditions in Si wafer direct bonding, The paper resents on pre-bonding according to HF pre-treatment conditions in Si wafer direct bonding. The characteristics of bonded sample were measured under different bonding conditions of HF concentration, applied pressure and annealing temperature(200~ 100$0^{\circ}C$) after pre-bonding. The bonding strength was evaluated by tensile strength method. The bonded interface and the void were analyzed by using SEM and IR camera, respectively, Components existed in the interlayer were analyzed by using FT-IR. The bond strength depends on the HF pre-treatment condition before pre-bonding(Min 2.4kgf/$\textrm{cm}^2$~ Max : 14.kgf/$\textrm{cm}^2$)

• 한국세라믹학회지
• /
• 제16권3호
• /
• pp.178-183
• /
• 1979

The carborundum abrasive specimens bonded with a soda-borosilicate glass were prepared. Samples fired at specified temperatures with various mixing ratio and forming pressure were examined in terms of the structure, bonding strength, and microscopic observations. Increasing the forming pressure up to 400kg/$\cm^2$, the structure became denser in proportion to the forming pressure. The bonding strength was generally increased with increasing the mixing ratio (Vb/Vg), but the bloating phenomena were observed when samples were fired above 95$0^{\circ}C$ with mixing ratio above 20%, consequently, the bonding strength was decreased. Samples fired at the temperature range 900~95$0^{\circ}C$ with mixing ratio 15~30% had the dense structure with various grades.

• 소성∙가공
• /
• 제16권2호
• /
• pp.138-143
• /
• 2007

Superplastic forming/diffusion bonding (SPF/DB) processes were analyzed using a 3-D rigid visco-plastic finite element method. A constant-triangular element based on membrane approximation and an incremental theory of plasticity are employed for the formulation. The coulomb friction law is used for interface friction between tool and material. Pressure-time relationship for a given optimal strain rate is calculated by stress and pressure values at the previous iteration step. In order to improve the contact searching, hierarchical search algorithm has been applied and implemented into the code. Various geometries including sandwich panel and 3 sheet shape for 3-D SPF/DB model are analyzed using the developed program. The validity fer the analysis is verified by comparison between analysis and results in the literature.