• 산업기술연구
• /
• 제18권
• /
• pp.87-95
• /
• 1998

Cracking is considered to be one of the important factors in determining the durability of reinforced concrete structures. When the bending stress exceeds the modulus of rupture of the concrete, cracking form along the length of members. The total load is transferred across these cracks by the reinforcement, but the concrete between cracks is still capable of carrying stresses due to the bond between steel and concrete. This phenomenon is called the tension stiffening effect. The tension stiffening effect is affected by many variables, such as the bond stress, strength of concrete, interrocking of aggregate, type of steel, and dowel action of steel. Also, this tension stiffening effect is usually quite significant in beams under service loading, and must be taken into account in the calculation of deflection and crack widths. In this study, the experiment was carried out on types of specimen, strength of concrete, and steel ratio and finite element analysis were compared in terms of load-deflection relationship, crack pattern.

• 한국구조물진단유지관리공학회 논문집
• /
• 제20권6호
• /
• pp.30-39
• /
• 2016

이 연구에서는 고연성과 낮은 탄성계수를 갖는 PET 섬유로 보강한 철근콘크리트 보의 부착특성과 휨거동을 각각 부착실험 및 휨실험을 통하여 규명하고자 하였다. 부착실험은 CSA S806에 따라 수행하였고, 실험변수는 섬유 종류와 보강량(CF 및 GF 시트 각 1겹, PET 시트 10겹)이었다. 총 8개의 보 실험에서 주요 실험변수는 단면의 연성비(${\mu}=3.4$, 7.0), 보강섬유 종류(CF, GF, PET) 및 보강량이었다. 보 단면의 모멘트-곡율 해석을 병행하였다. 부착실험의 결과, CF, GF 시트 1겹 보강에서 유효 부착길이는 각각 120, 60 mm 이었고 최대부착응력은 각각 3.25, 2.99 MPa 이었다. PET 10겹 보강에서 유효 부착길이는 60 mm, 최대 및 평균 부착응력은 각각 2.30, 2.10 MPa 이었다. 또한 최대 강도 시 CF, GF, PET의 변형율은 각각 0.36%, 0.49%, 6.29% 였으며 CF, GF 부착실험체는 계면에서 시트가 최종적으로 탈락하였지만 PET 부착 실험체에서 박리현상은 나타나지 않았다. 휨실험의 결과, PET 10, 20, 30겹으로 보강한 RC 보의 휨강도, 휨강성이 모두 무보강 보에 비해 증가하였고, 연성적인 휨파괴 양상을 보였으나 PET 30겹의 경우 20겹에 비하여 연성이 감소하였다. 모멘트-곡율 해석의 결과, PET 보강 보에서 접착제의 물성을 해석에 포함시키면 해석의 정확도가 향상하였다. 한편 PET 의 내구성에 대해서는 보고된 문헌이 없어서 현재 연구 진행 중이다.

• Journal of the Korean Wood Science and Technology
• /
• 제18권2호
• /
• pp.67-78
• /
• 1990

This study was performed to determine the characteristics of physical and mechanical properties of domestic wood based materials; plywood, particleboard, medium density fiberboard. Main items of tested properties were panel size, moisture content, water absorption, linear expansion and thickness swelling, glue bond shear strength, bending properties(stress at proportional limit, modulus of rupture. modulus of elasticity), tensile strength, screw holding strength, and internal bond as neccessary. the results were discussed mainly with Korean Standards. The obtained conclusions are as follows; 1. Length and width of 3mm thin plywood(3-ply) and 12mm thick plywood(7-ply) were satished with KS-standard, but thicknesses of these panels were not- passed tolerance limit except one of eight makers. 2. Length and width of particleboard and medium density fiberboard were greater than the tolerance limit value of KS standard, but the thicknesses of these panels were passed this value. 3. Moisture contents of 12mm thick and 3mm thin plywood were satisfied with KS-standard except one mill made 3mm thin plywood. 4. Moisture absortion of plywood was not passed tolerance limit of KS-standard but particleboard was satisfied with this standard value. 5. Dry and wet shear strengths in glue bond of 3mm thin plywood were not reached to KS-standard, but those of 12mm thick plywood were sufficiently satisfied with KS standrad. 6. Modulus of ruptures, parallel to grain and perpendicular to grain of plywood, and particleboard and medium density fiberboard were satisfied with KS-standard. 7. Tensile strengths, parallel to grain and perpendicular to grain of plywood were satisfied with allowance stress of US product standard PS 1-74. 8. Screw holding strength of particleboard was not reached to KS standard, but internal bond was satisfied with KS standard.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2003년도 학술.기술논문 발표회
• /
• pp.59-62
• /
• 2003

Kinds, shapes and fraction ratios of fibers have influence on properties of HPFRCC(High-Performance Fiver Reinforced Cementitious Concrete) like bending strength, strain capacity and fracture toughness. For example, hydrophilic fibers have different chemical bond strength from hydrophobic fibers, fiber shapes influence on fiber pull-out and rupture, and fiber volume fraction influence on bending strength. In this study, to estimate influences of kinds, shapes and fraction ratios of fibers, we make HFRCC with 3 kind of fiber in various volume fraction of fiber and compare cracking, bending strength and fracture toughness. As the results, bending strength of HPFRCC was increased as fiber volume fraction was increase and fiber tensile strength was increase, and strain capacity and fracture toughness of HFRCC was higher in fiber pull-out fracture than in fiber rupture fracture. And HFRCC showing pseudo strain hardening has higher fiber reinforce efficiency than others.

• 한국압력기기공학회 논문집
• /
• 제11권1호
• /
• pp.12-19
• /
• 2015

As a measure of improving the mechanical properties of a diffusion bonded joint of a ferritic/martensitic steel (FMS), the post-bonding heat treatment (PBHT) is applied. In the temperature range of normalizing condition ($950-1,050^{\circ}C$), diffusion bonding is employed with compressive stress (6 MPa). Due to the martensite structure distributed in the matrix, Vicker's hardness values of the as-bonded are much higher than those of the as-received. Through the PBHT for 1 h at $720^{\circ}C$, hardness values are recovered to as low as those of the as-received condition. Also, tensile properties of PBHT are similar to those of the as-received at up to the test temperature of $550^{\circ}C$, when the diffusion bonding is carried out over $1,000^{\circ}C$. Based on the creep-rupture testing performed at $650^{\circ}C$ in air environment, the joint efficiency of the PBHTed specimens is about 80% in, which is higher than that of the as-bonded specimens.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2002년도 Proceedings of the International Welding/Joining Conference-Korea
• /
• pp.803-808
• /
• 2002

A computer-aided alloy-designing technique to develop the insert metal for transient liquid phase (TLP) bonding was applied to high aluminum Ni-base superalloys. The main procedure of a mathematical programming method was to obtain the optimal chemical composition through rationally compromising the plural objective performances of insert metal by a grid-search which involved data estimation from the limited experimental data using interpolation method. The objective function Z which was introduced as an index of bonding performance of insert metal involved the melting point, hardness (strength), formability of brittle phases and void ratio (bonding defects) in bond layer as the evaluating factors. The contour maps of objective function Z were also obtained applying the interpolation method. The compositions of Ni-3.0%Cr-4.0%B-0.5%Ce (for ${\gamma}$/${\gamma}$/${\beta}$ type alloy) and Ni3.5%Cr-3.5%B-3%Ti (for ${\gamma}$/${\gamma}$ type alloy) which optimized the objective function were determined as insert metal. SEM observations revealed that the microstructure in bond layers using the newly developed insert metals indicated quite sound morphologies without forming microconstituents and voids. The creep rupture properties of both joints were much improved compared to a commercial insert metal of MBF-80 (Ni-15.5%Cr-3.7%B), and were fairly comparable to those of base metals.

• 한국가구학회지
• /
• 제18권2호
• /
• pp.106-110
• /
• 2007

This study was performed to find potentialities of the leaves of gingko tree (Gingko biloba L.) as a raw material for particleboard (PB) manufacturing. Various amounts of the leaves were mixed with wasted wood particles to manufacture PB. Physical and mechanical properties, such as density, internal bond (IB) strength, and modulus of rupture (MOR) of manufactured PB were not much different from those of the control board. Formaldehyde emission values decreased with increasing the amount of leaves. Especially, the formaldehyde emission of PB made with 5 percent of leaves was decreased to 1.31 mg/l, which is about 36% lower emission than that of the control. From these results, the leaves of gingko tree may be considered as an additive of lowering formaldehyde emission in a functional PB manufacturing process.

• Journal of the Korean Wood Science and Technology
• /
• 제36권5호
• /
• pp.11-23
• /
• 2008

The mechanical and physical properties of zinc borate (ZB)-modified oriented strandboard (OSB) from southern wood species were investigated in this study. OSB panels treated with ZB were not significantly weaker than the untreated samples in terms of specific modulus of elasticity (SMOE) and specific modulus of rupture (SMOR). ZB showed the negative effect on specific internal bond (SIB) strength, since some of ZB would persist as a powder state on the flake surfaces, thereby reducing the bonding efficiency of the adhesive. The ZB level did not show significant effect on thickness swelling (TS). ZB-modified OSB showed the suitable mechanical and physical properties for the structural wood composites.

• Bulletin of the Korean Chemical Society
• /
• 제8권4호
• /
• pp.291-296
• /
• 1987

Vibrational spectroscopy has been applied to the benzenethiol molecule adsorbed on the silver surface. The results of infrared and Raman spectral studies have led to the conclusion that benzenethiol is chemisorbed dissociatively on the silver surface by rupture of S-H bond and the benzenethiolate formed upon adsorption is bound to silver via its sulfur atom. It seemed more likely that benzenethiol is adsorbed as being inclined to the silver surface. On contact with oxygen, the geometry of the adsorbed species appeared to bear a resemblance to that of silver benzenethiolate salt. The infrared bands of adsorbed species remained with little decrease of intensity even after the prolonged evacuation at 673 K, indicating that benzenethiol is very strongly chemisorbred to the silver surface.

• Journal of the Korean Wood Science and Technology
• /
• 제28권3호
• /
• pp.1-8
• /
• 2000

본 연구는 미이용 자원인 소경목(小經木) 조생수(早生樹) 등의 저질원료로부터 고성능을 지니는 구조용 보드를 제조하는 기술을 개발하는 것을 목적으로 하여 할렬 스트랜드 (S)/파티클(P) 복합체의 층구조와 S와 P의 혼합비율을 바꾼 단면구성에 따른 기초적 물성을 검토했다. 그 결과 스트랜드층을 포함하고 있는 SP 복합체의 경우, 전체적으로 휨성능(MOR, MOE)이 매우 높았다. 또 S단층 보드는 현저한 이방성을 나타내었지만 층구조가 PB에 가까워질수록 이방성은 감소하여, 7층 구조의 복합체는 이방성이 적었으며 특히 SP7은 직교방향도 휨강도가 높았다. 습윤시 휨강도 성능도 같은 경향을 나타내었다. 박리강도(IB)는 PB가 가장 높았고, 스트랜드층을 가진 복합체는 거의 같은 값을 나타내었다. 두께팽창율(TS) 은 PB가 가장 적은 값을 나타내었으며, 표층이 P층인 구조가 S표층구조보다 적은 경향을 나타내었다. 복합체의 표면특성은 표층 엘리먼트의 영향을 받아, 적고 미세한 엘리먼트인 P표층의 복합체가 크고 두꺼운 S표층 복합체보다 양호하였다. S와 P의 혼합비율의 영향은, SP비(比)를 증가시켜도 강도물성(MOR, MOE, IB)은 향상되지 않으며, 오히려 저하되는 것도 있었다. 두께팽창율(TS)은 SP 비(比) 1:1 이상의 복합체에서는 S만으로 제조한 보드와 같은 정도의 값을 나타내었다.