• 한국해양공학회지
• /
• 제35권1호
• /
• pp.50-58
• /
• 2021

The demand for eco-friendly energy is expected to increase due to the recently strengthened environmental regulations. In particular, the flow inside the pipe used in a cargo handling system (CHS) or fuel gas supply system (FGSS) of hydrogen transport ships and hydrogen-powered ships exhibits a very complex pattern of multiphase-thermal flow, including the boiling phenomenon and high accuracy analysis is required concerning safety. In this study, a feasibility study applying the boiling model was conducted to analyze the multiphase-thermal flow in the pipe considering the phase change. Two types of boiling models were employed and compared to implement the subcooled boiling phenomenon in nucleate boiling numerically. One was the "Rohsenow boiling model", which is the most commonly used one among the VOF (Volume-of-Fluid) boiling models under the Eulerian-Eulerian framework. The other was the "wall boiling model", which is suitable for nucleate boiling among the Eulerian multiphase models. Moreover, a comparative study was conducted by combining the nucleate site density and bubble departure diameter model that could influence the accuracy of the wall boiling model. A comparison of the Rohsenow boiling and the wall boiling models showed that the wall boiling model relatively well represented the process of bubble formation and development, even though more computation time was consumed. Among the combination of models used in the wall boiling model, the simulation results were affected significantly by the bubble departure diameter model, which had a very close relationship with the grid size. The present results are expected to provide useful information for identifying the characteristics of various parameters of the boiling model used in CFD simulations of multiphase-thermalflow, including phase change and selecting the appropriate parameters.

• 대한기계학회논문집
• /
• 제16권1호
• /
• pp.87-94
• /
• 1992

본 연구에서는 실험적 해석을 통하여 액체-액체계의 직접접촉 막비등열전달 특성을 최소막비등지점과 막비등열유속의 측면에서 해석하고자 한다. 이는 직접접촉 비등에 대한 효율적인 열전달의 온도영역이나 주어진 액체-액체 계의 조합에 대한 증 기폭발의 발생가능성의 예측에 활용될 수 있을 것이다.

• 한국식품조리과학회지
• /
• 제19권3호
• /
• pp.271-279
• /
• 2003

This study was conducted to investigate the sensory and physicochemical properties of beef consomme made with different boiling times (1, 2, 3 and 4hrs). The sensory properties were evaluated with respect to both the acceptability (color, smell, mouth feel, taste, overall acceptability) and intensity characteristics (color, smell, clarify, taste). From the results, the 3hr treatment was most favored for color, smell, mouth feel, taste and overall acceptability, from the sensory evaluation tests. According to a quantitative descriptive analysis of the sensory evaluation for the product, the color, smell and taste gave higher scores with increases in the boiling time. As for the physicochemical characteristics, the pH was increased with increasing boiling time. The reducing sugars, turbidity and viscosity increased with increasing boiling time. The colorimetric lightness values (L) decreased, and redness (a), yellowness(b) and color difference values (ΔE) increased with increasing boiling time. There were 18 free amino acids identified; the alanine, glutamic acid, arginine and leucine contents were high in the free amino acids of the consomme made with different boiling times. There were 3 free sugars identified, glucose, fructose and sucrose. The free sugar contents increased with increasing boiling time. There were changes in the mineral contents of the consomme made with different boiling time; with high K, Na and P contents. The mineral contents increased with increasing, boiling time. The results showed the consomme made by boiling for 3hrs was superior in both its sensory and physicochemical qualities.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.1590-1596
• /
• 2003

The experiments of boiling heat transfer were performed to investigate the boiling enhancement in saturated water by using multi-stage electroplated surface. In order to optimize the boiling performance, current flux and duration in multi-stage electroplating were varied. Current flux, 2 $A/12cm^2$ and 0.33 $A/cm^2$, and duration ranging from 15 second to 50 second are considered. The results showed that multi-stage electro plated surfaces generate enhancement of boiling parameters such as boiling incipient superheat, boiling heat transfer coefficient, and critical heat flux compared to plain surface. The SEM images of the coated surfaces were captured to examine the structure of porous surface, which provides the enhancement of boiling heat transfer.

• Nuclear Engineering and Technology
• /
• 제44권8호
• /
• pp.889-896
• /
• 2012

Recent progress in the computational fluid dynamics methods of two- and multiphase phase flows has already started opening up new exciting possibilities for using complete multidimensional models to simulate boiling systems. Combining this new theoretical and computational approach with novel experimental methods should dramatically improve both our understanding of the physics of boiling and the predictive capabilities of models at various scale levels. However, for the multidimensional modeling framework to become an effective predictive tool, it must be complemented with accurate mechanistic closure laws of local boiling mechanisms. Boiling heat transfer has been studied quite extensively before. However, it turns out that the prevailing approach to the analysis of experimental data for both pool boiling and forced-convection boiling has been associated with formulating correlations which normally included several adjustable coefficients rather than based on first principle models of the underlying physical phenomena. One reason for this has been the tendency (driven by practical applications and industrial needs) to formulate single expressions which encompass a broad range of conditions and fluids. This, in turn, makes it difficult to identify various specific factors which can be independently modeled for different situations. The objective of this paper is to present a mechanistic modeling concept for both pool boiling and forced-convection boiling. The proposed approach is based on theoretical first-principle concepts, and uses a minimal number of coefficients which require calibration against experimental data. The proposed models have been validated against experimental data for water and parametrically tested. Model predictions are shown for a broad range of conditions.

• Nuclear Engineering and Technology
• /
• 제27권4호
• /
• pp.503-517
• /
• 1995

강제대류 천이비등 열유속을 보다 실제 적으로 예측하기 위한 역학적 모델을 개발하였다. 이 모델은 가열된 벽면 근처를 어떤 기포기둥(Vapor Blanket)이 통과할 때 일어나는 다단계 비등과정 즉, 임계 기포기둥의 형성, 기포기둥밑의 미소액막(Macrolayer)의 기화 및 고갈, 그리고 얇은 기체막에서 일어나는 불안정한 막비등과정에 기초하였다. 핵비등이탈점 (DNB )과 막비등이탈점 (DFB)사이의 천이비등 곡선상의 열유속은 임계 기포기둥이 주어진 벽면을 통과할 동안 상기한 각 비등과정의 지속 시간비(Time Fraction)를 각 비등열유속에 곱한 후 그것을 합하여 정량화하였다. 이 모델의 예측치를 현재까지 발표된 문헌들에 나타난 실험치와 비교한 결과, 본 모델은 저건도 및 10 bar 근처의 고압조건의 실험치를 잘예측하는 것으로 나타났다.

• Nuclear Engineering and Technology
• /
• 제38권2호
• /
• pp.175-184
• /
• 2006

Boiling and flashing are driven by the same physics for nucleation, bubble growth, departure etc. An adequate model of boiling has to describe the flashing too. The subject of this paper is to prove this uniqueness of the elementary physics driving the both processes.

• 한국수산과학회지
• /
• 제55권6호
• /
• pp.875-885
• /
• 2022

This study was performed to confirm the optimal extraction method for antimicrobial peptides from the Hard-shelled mussel. Extractions were performed with two processes including 1% HAc/boiling and 1% HAc/non-boiling methods and used extracts for the comparison of the antimicrobial activity, protease stability, action mechanism, AU-PAGE (acid-urea PAGE), and HPLC chromatograms. 1% HAc/boiling extract showed potent antibacterial activities both against Gram-positive and negative bacterium but 1% HAc/non-boiling extract showed antibacterial activity only against Gram-positive bacteria. Treatment of 1% HAc/boiling extract with proteases retained almost antibacterial activity against B. subtilis, but abolished significant antibacterial activity against E. coli D31. Only 1% HAc/boiling extract showed two discrete clearing antibacterial zones including slow migrating and rapid migrating zones. Both extracts showed strong DNA-binding ability but did not show bacterial membrane permeabilizing ability. In comparison of the chromatogram obtained from C₁₈ or cation-exchange HPLC, the eluted peaks from 1% HAc/boiling extract showed high hydrophobic property or absorbance compared to 1% HAc/non-boiling extract, respectively. The concentration of the purified antimicrobial peptide was also higher in 1% HAc/boiling extract than in 1% HAc/non-boiling extract. Our results suggest that the effective extraction condition for antimicrobial peptides from marine invertebrate is boiling process in a weak acetic acid solution (1%).

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집D
• /
• pp.232-239
• /
• 2001

The present study is an experimental investigation of nucleate boiling heat transfer mechanism in pool boiling from wire heaters immersed in saturated FC-72 coolant and water. The vapor volume flow rate departing from a wire during nucleate boiling was determined by measuring the volume of bubbles, varying $25{\mu}m,\;75{\mu}m,\;and\;390{\mu}m$, from a wire utilizing the consecutive-photo method. The effects of the wire size on heat transfer mechanism during a nucleate boiling were investigated by measuring vapor volume flow rate and the frequency of bubbles departing from a wire immersed in saturated FC-72. One wire diameter of $390{\mu}m$ was selected and tested in saturated water to investigate the fluid effect on the nucleate boiling heat transfer mechanism. Results of the study showed that an increase in nucleate boiling heat transfer coefficients with reductions in wire diameter was related to the decreased latent heat contribution. The latent heat contribution of boiling heat transfer for the water test was found to be higher than that of FC-72. The frequency of departing bubbles was correlated as a function of bubble diameters.

• 대한기계학회논문집B
• /
• 제33권10호
• /
• pp.729-736
• /
• 2009

Pool boiling heat transfer and critical heat flux (CHF) of water-based nanofluids with alumina and titania nanoparticles of 0.01% by volume were investigated on a disk heater at saturated and atmospheric conditions. The experimental results showed that the boiling in nanofluids caused the considerable increase in CHF on the flat surface heater. It was revealed by visualization of the heater surface subsequent to the boiling experiments that a major amount of nanoparticles deposited on the surface during the boiling process. Pool boiling of pure water on the surface modified by such nanoparticle deposition resulted in the same CHF increases as what boiling nanofluids, thus suggesting the CHF enhancement in nanofluids was an effect of the surface modification through the nanoparticle deposition during nanofluid boiling. Possible reasons for CHF enhancement in pool boiling of nanofluids are discussed with surface property changes caused by the nanoparticle deposition.