• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2011년 춘계학술대회논문집
• /
• pp.407-413
• /
• 2011

VIC (Vortex-In-Cell) method for viscous incompressible flow is presented to simulate the wake behind a modified NACA16 foil. With uniform rectangular grid, the velocity in field is calculated using streamfunction from vorticity field by solving the Poisson equation in which FFT(Fast Fourier Transform) is combined with 2nd order finite difference scheme. Here, LES(Large Eddy Simulation) with Smagorinsky model is applied for turbulence calculation. Effective viscosity is formulated using magnitude of strain tensor(or vorticity). Then the turbulent diffusion as well as viscous diffusion becomes particle strength exchange(PSE) with averaged eddy viscosity. The well-established panel method is combined to obtain the irrotational velocity and to apply the no-penetration boundary condition on the body panel. And wall diffusion is used for no-slip condition numerical results of turbulent stresses are compared with experimental results (Bourgoyne, 2003). Before comparing process, LES(Large Eddy Simulation) SGS(Subgrid scale) stress is transformed Reynolds averaged stress (Winckelmans, 2001).

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 춘계학술대회논문집
• /
• pp.21-24
• /
• 2008

The present study numerically investigates the glottal airflow characteristics as well as acoustic features of phonation fully coupled with dynamic behavior of vocal folds. The vocal folds are described by a low-dimensional body-covered model characterized by bio-mechanical parameters such as glottal width, vocal folds stiffness, and subglottal pressure. The flow in the vocal tract is modeled as an incompressible, axisymmetric form of the Navier-Stokes equations (INS), while the acoustic field is predicted by the linearized perturbed compressible equations (LPCE). The computed result shows that a two-mass model of vocal folds is sufficient to reproduce temporal variations in oral airflow and glottis motion produced by female speakers. It is also found that i) the glottal width has a significant effect on the amplitude of glottal flow, and thus on the amplitude of acoustic wave in the vocal tract, ii) the vocal fold tension is the main control parameter for the fundamental frequency of phonation, iii) the subglottal pressure plays an appreciable role on reproduction of the self-sustained oscillation of vocal folds, and iv) the strength of pulsating airflow and vortical structures are primarily affected by glottal width and subglottal pressure, and are closely related to pitch, loudness, and voice quality. Finally, more comprehensive explanation about the difference between one- and two-mass models is presented with discussion of effectiveness of vocal folds oscillation and voice quality.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 춘계학술대회논문집
• /
• pp.711-714
• /
• 2008

The objective of this paper is to know the characteristics of pressure through a simplified typical carburetor used in small engines at the different throttle opening conditions. The carburetor is the device responsible for creating the right air-fuel mixture according to the different engine operating conditions. It is activated by the static or the dynamic pressure. The carburetor dummy is geometrically similar of LPG brush-cutter engine's diaphragm carburetor and is made of acrylic. Suction system gives body to crankcase vacuum using the vacuum pump and throttle opening conditions are controled by transfer device. Carburetor venturi throat and fuel charging tube diameter is each 20mm, 4.1mm. The result of the work presents an unprecedented phenomenon of suction pressure variation inside the carburetor venturi. It is predicted that these unprecedented pressure variation be caused by minor losses; sudden contraction or expansion, open or partially closed and so on.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 춘계학술대회논문집
• /
• pp.456-459
• /
• 2008

In the field of yarn dyeing, the most generally employed method is a type of package dyeing which uses a package cheesesstacked on a spindle made of a perforated tube. Spindles up to now, have been designed without considering the characteristics of dyeing liquid, focusing only on the geometric configuration which cause many problems such as lack of level dyeing. To improve the level dyeing and find the appropriate spindle configuration for the most effective dyeing process, this study examines the spindle flow-field in detail, using a computational method. Flow characteristics inside the spindle have been investigated with varying in porosity, porous diameter and the velocity of the flow. The results show that the total pressure of the flow through the spindle is used to overcome body force. The characteristics of the flow from the porous spindle could also be observed. Based on the results from this study, an effective spindle configuration for level-dyeing has been proposed.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 춘계학술대회논문집
• /
• pp.39-42
• /
• 2008

In the case of the general helicopter among rotorcraft, length of the rotor blade for thrust-generation is longer than that of fuselage and tail rotor is required in order to compensate moment of the fuselage. For those reasons, enough space for take-off and landing should be secured and an accessibility for building is low. Also, the accidents caused by tail rotor occur frequently. However, the case of counter-rotating has merits that tail rotor is unnecessary as well as length of the rotor blade can be shortened but has a weakness that the weight of body is increased. In the present study, aerodynamic force measurement on single rotor system equipped with NACA0012 airfoil, which has aspect ratio of 6 and chord length of 35.5 mm, was carried out. And measurement was conducted with blade which has a half size of the former blade by using single motor counter-rotating. Aerodynamic force measurement was acquired by using 6-component balances and coefficients of thrust and power were derived along the pitch angle varying from 0$^{\circ}$ to 90$^{\circ}$ with the increment of 10$^{\circ}$. Those aerodynamic force data will be utilized for the design and production of brand-new counter-rotating rotor blade system which has same thrust with single blade system and provides a good accessibility to building by reducing its blade length.

• 대한한방소아과학회지
• /
• 제22권1호
• /
• pp.149-162
• /
• 2008

Objectives The purpose of this study is to investigate that causes of motion sickness in oriental medicine. Methods The internal and external studies about motion sickness were searched Results and Conclusions The motion sickness is induced by conflict of balance system including vestibular, visual and proprioceptive system. The motion sickness is more common in female and in children between 2 and 12 years old. In western medicine, antihistamine and anticholinergic has been used for treatment of motion sickness, but these anti-motion sickness drug turn out to be not a perfect solution and have several side effects. On the other hands, In oriental medical terminology, there is no words equivalent to the "motion sickness", but we consider the motion sickness as state with dizziness, nausea and vomiting. The motion sickness can be induced by either internal or external causes and the internal causes can thought to be a constitutional factor of an individuals, and the general transportation can be an external cause. The important internal cause is a dysfunction of the spleen, stomch(脾胃不調), retention of phlegm and fluids(痰飮), and deficiency of the kidney jing(腎精不足). The wind(風) and fire(火) in the upper part of the body, especially in the head, also can be an important cause of the motion sickness.

• 대한유전성대사질환학회지
• /
• 제14권1호
• /
• pp.48-53
• /
• 2014

Smith-Lemli-Opitz syndrome (SLO) is a rare, autosomal recessive disease caused by an inborn error in cholesterol synthesis. Patients with this disease suffer from multiple malformations due to reduced activity of 7-dehydrocholesterol reductase (DHCR7), which increases 7-dehydrocholesterol (7DHC) and 8-dehydrocholesterol (8DHC) concentrations and decreases cholesterol concentration in body fluids and tissue. Here, we describe Korean siblings with SLO who were diagnosed recently, and performed a review of literature about Korean cases with SLO to date. Microcephaly and syndactyly of the second and third toes are the most common physical finding in SLOS patients. Other malformations including growth failure, cleft palate or bifid uvula, various heart malformation, genital ambiguity in males are also accompanied. Not all patients showed low levels of serum cholesterol, so DHCR7 mutation analysis can be helpful to confirmative diagnosis. Two mutations on p.R352 locus (p.R352W and p.R352Q) are commonly identified in Korean SLO patients. Although rare in Korea, SLO should be considered in the differential diagnosis of growth failure with intellectual disability, especially in patients with multiple congenital anomalies.

• 자원환경지질
• /
• 제18권4호
• /
• pp.357-368
• /
• 1985

경주(慶州) 남부(南部) 2.8km 지점에는 치술령 화산암층이 분포하며, 이 화산암층 보다 후기에 분출 형성된 distreme이 있다. diatreme은 지름이 1.2km의 원형의 화구로서 화산쇄설물로 충진 되어 있다. 이 화산 쇄설물은 proximal ballistic fall deposits로서 층리를 보여주며, 각 층은 상당히 두껍고 특징적으로 많은 양의 accretionary lapilli가 함유되어 있다. 이러한 특징은 시추에 의해 지표 하부 650m가지 확인되었다. 이러한 특징으로 보아 diatreme은 규장질 magma에 많은 양의 물이 유입되는 환경에서 연속인 분출 활동을 하였음을 의미하고, 화산 활동 기간 중에 연속적으로 화산쇄설물이 퇴적 및 침강 하였음을 의미한다.

• 대한임상검사과학회지
• /
• 제36권2호
• /
• pp.269-273
• /
• 2004

Squamous cell carcinoma(SCC) associated antigen is a subfraction of TA-4, a tumor-associated antigen first described by Kato and Torigoe in 1977. TA-4, obtained from squamous cell carcinoma cancer tissue of the uterine cervix, has been characterized as a glycoprotein with a molecular weight of approximately 45,000 daltons. SCC antigen has been studied in other squamous cell malignancies including lung, esophagus, head and neck, anal canal, and skin. SCC antigen is shed naturally through sweat, saliva and other body fluids. Contamination of specimens, tray, bead dispenser or other accessories with sweat, saliva or aerosols can cause falsely elevated values. To reduce the possibility of contamination, gloves should be worn in all phases of assay preparation, and when handling specimens, accessories or reagents that will be used in SCC and Thyroid function test(TFT).

• 대한디지털의료영상학회논문지
• /
• 제14권2호
• /
• pp.75-81
• /
• 2012

The purpose of this study was administered to the body for examination and treatment, high-energy radioactive isotope(F-18, I-131) in vitro discharge experiments. Increasing exposed dose of radiation to health professionals is caused by the increase of PET/CT use and a radioactive isotope. Therefore, the high-energy isotope F-18 and I-131 after administration about using Metabolite excretion was studied. As a results of this study, patients had plenty of fluids for testing and treatment alone administered radiopharmaceuticals can be more than twice as fast excretion induced emissions. Also was able to get a better image space to reduce the dose rate.