• Asian-Australasian Journal of Animal Sciences
• /
• 제30권7호
• /
• pp.985-993
• /
• 2017

Objective: The objective of this study was to evaluate increasing doses of a novel microbial phytase (Cibenza Phytaverse, Novus International, St. Charles, MO, USA) on standardized total tract digestibility (STTD) of P in canola meal (CM), corn, corn-derived distiller's dried grains with solubles (DDGS), rice bran (RB), sorghum, soybean meal (SBM), sunflower meal (SFM), and wheat. Methods: Two cohorts of 36 pigs each (initial body weight = $78.5{\pm}3.7kg$) were randomly assigned to 2 rooms, each housing 36 pigs, and then allotted to 6 diets with 6 replicates per diet in a randomized complete block design. Test ingredient was the only dietary source of P and diets contained 6 concentrations of phytase (0, 125, 250, 500, 1,000, or 2,000 phytase units [FTU]/kg) with 0.4% of $TiO_2$ as a digestibility marker. Feeding schedule for each ingredient was 5 d acclimation, 5 d fecal collection, and 4 d washout. The STTD of P increased (linear or exponential $p{\leq}0.001$) with the inclusion of phytase for all ingredients. Results: Basal STTD of P was 37.6% for CM, 37.6% for corn, 68.6% for DDGS, 10.3% for RB, 41.2% for sorghum, 36.7% for SBM, 26.2% for SFM, and 55.1% for wheat. The efficiency of this novel phytase to hydrolyze phytate is best described with a broken-line model for corn, an exponential model for CM, RB, SBM, SFM, and wheat, and a linear model for DDGS and sorghum. Based on best-fit model the phytase dose (FTU/kg) needed for highest STTD of P (%), respectively, was 735 for 64.3% in CM, 550 for 69.4% in corn, 160 for 55.5% in SBM, 1,219 for 57.8% in SFM, and 881 for 64.0% in wheat, whereas a maximum response was not obtained for sorghum, DDGS and RB within the evaluated phytase range of 0 to 2,000 FTU/kg. These differences in the phytase concentration needed to maximize the STTD of P clearly indicate that the enzyme does not have the same hydrolysis efficiency among the evaluated ingredients. Conclusion: Variations in enzyme efficacy to release P from phytate in various feedstuffs need to be taken into consideration when determining the matrix value for phytase in a mixed diet, which likely depends on the type and inclusion concentration of ingredients used in mixed diets for pigs. The use of a fixed P matrix value across different diet types for a given phytase concentration is discouraged as it may result in inaccurate diet formulation.

• 대한치과기공학회지
• /
• 제18권1호
• /
• pp.95-115
• /
• 1996

The esthetic factor for the esthetic prosthesis were studied on 300 persons. The praaticipants were 150 students registered under the Deparment of Dental Laboratoy Technology, Jisan Junior College at the present day of June, 1995 and their mothers. The results were as follows; 1. The number of persons with 28 teeth in their oralcatity was highest(P<0.01). They complained that they have only 28 teeth bacaues of the loss(deficiency) fo teeth due to their impacted teeth and dental caries. 2. The presons with feelings of dissatisfaction were large in number(P<0.01). They were dissatisfied with an abnormal tooth form(33.5%), tooth position(31.7%), tooth color(31.1%), and tooth size(3.7%) in order(P<0.01). 3. In their facial form, the most numerous were men with square form and women with ovoid form(P<0.01). Among the whloe number fo facial forms it appeared to decresae in the order of ovoied(41.8%), square(32.7%), square+tapered(20.5%), and tapered form(5%)(P<0.01). In a profile form, the most numerous were men with A form and women with B. Among the whole participants the most numerous were persons with B form and persons with A and C form were next in oder of numbers(P<0.01). 4. In discoloration of teeth, the most numerous were persons who have no discoloration. 5. In the esthetic recovery of anterior prosthesis the color matching of proximal teeth was not correct, but the outline of proximal teeth was to be reproduced correctly. 6. In the diastema of teeth, the number of persons who have no diastema was higher than that of persons who have a disatema(P<0.01) Among the persons who have diastema the most numerous were persons who have a diastema, and next were 2, 4, 3 and 5 diastemas in order. 7. In a meeting point of the midline of the body and the tooth the number of person hanving a meeting point was higher than that of persons who did not fit each other(P<0.01). The bias direction of midline teeth appeared to be affected by chewing direction, prosthesis location, and posterior location. 8. The length and width of teeth in the tooth size were suitable(P<0.01). The number of persons who have central teeth longer than lateral teeth was high(P<0.0). 9. In the results of smile analysis, the line form connected with incisal edge of upper canine were parallel(P<0.01). When smile the location fo upper lips should be in accord with the central area of teeth(P<0.01) and lower lip should be atteched to the edge of anterior teeth in order to be esthetic. 10. Among the number of upper teeth we can see the most numerous were 8 teeth and next were 10, 6 and 12 in order.

• 한국조리학회지
• /
• 제16권1호
• /
• pp.112-126
• /
• 2010

본 연구는 국내 외식 기업 종사원의 신체적 매력도가 대인관계, 직무만족도 및 조직시민행동에 미치는 영향을 파악하고, 성별과 기업 형태의 조절 효과에 대해 실증적으로 분석하였다. 총 553명의 표본을 대상으로 구조방정식 모형을 통해 3개의 가설을 검증하였으며, 모형 적합도는 $x^2$(df 179)=627.230, p<0.01, CMIN/DF=3.504, RMR=0.228, GFI=0.903, AGFI=0.875, NFI=0.935, CFI=0.953, RMSEA=0.067 등으로 조사되었다. 연구 결과, 외식 기업 종사원의 얼굴($\beta=0.213$) 과 체형($\beta=0.111$)에 대한 긍정적인 인식이 대인 관계에 유의한 영향을 주는 것으로 나타났으며, 호의적인 대인관계($\beta=0.375$)도 직무 만족도에 유의한 영향을 주었고, 종사원의 긍정적인 직무 만족도($\beta=0.756$) 또한 조직시민행동에 유의한 영향을 주는 것으로 나타났다. 또한 외식 기업 종사원의 인지된 신체적 매력도와 대인관계, 직무만족도 및 조직시민행동과의 인과관계에 있어서 성별과 기업 형태의 조절 효과가 존재하는 것으로 조사되었다.

• 패션비즈니스
• /
• 제13권4호
• /
• pp.137-153
• /
• 2009

Recently, young men have become more muscular as they become more interested in physical figure. However, most of these muscular men have fit problems regarding ready-made clothes. In view of this, this study aimed to develop a prototype jacket pattern for muscular men. For this study, five muscular men were selected to put on existing jacket pattern for wearing tests. The regression formula, in which muscular men body measures were adopted, was applied to unsuitable parts, especially the areas determined not to be appropriate in the evaluation of existing jacket pattern wearing tests. After the first and the second jacket pattern wearing tests, the final jacket pattern suitable for muscular men was developed. The results of the study were as follows: In order to make up for the problem of the loosening of the lapel area, due to the development of the chest muscle, the chest circumference line on the chest area of the pattern was cut to be 1.0cm wide; thus, the front length was modified with an increase. The wearing tests found that a wearers felt discomfort from the tight armhole area, so the armhole depth was set to be a little lower than that of ready-made clothes. A muscular men needs much more extra quantity in this area because the upper part of the back side is projected due to the greater development of the trapezius muscle and the deltoid than in average men. Hence, concerning the standard line for the length of the back interscye, ease of 1.0cm was added to the regression equation formula {(0.371${\times}$chest circumference+3.145)/2} in order to resolve the discomfort with the back area. Also, for the biacromion length, the upper arm protruded more than the shoulder point of the jacket because of the development of the deltoid and the upper arm muscle, and it was set to be wider than the actual shoulder. In order to solve the problem of discomfort from the narrow neck area during the wearing of a jacket owing to the development of the trapezius muscle, extra ease of 0.5cm was added to chest circumference/12-0.5cm in the existing jacket prototype to the width of back of the neck, and it was corrected to be chest circumference/12.

• 한국해양공학회지
• /
• 제33권2호
• /
• pp.168-177
• /
• 2019

KRISO (Korea Research Institute of Ship & Ocean Engineering) started a project to develop the core algorithms for autonomous intervention using an underwater robot in 2017. This paper introduces the development of the robot platform for the core algorithms, which is an ROV (Remotely Operated Vehicle) type with one 7-function manipulator. Before the detailed design of the robot platform, the 7E-MINI arm of the ECA Group was selected as the manipulator. It is an electrical type, with a weight of 51 kg in air (30 kg in water) and a full reach of 1.4 m. To design a platform with a small size and light weight to fit in a water tank, the medium-size manipulator was placed on the center of platform, and the structural analysis of the body frame was conducted by ABAQUS. The robot had an IMU (Inertial Measurement Unit), a DVL (Doppler Velocity Log), and a depth sensor for measuring the underwater position and attitude. To control the robot motion, eight thrusters were installed, four for vertical and the rest for horizontal motion. The operation system was composed of an on-board control station and operation S/W. The former included devices such as a 300 VDC power supplier, Fiber-Optic (F/O) to Ethernet communication converter, and main control PC. The latter was developed using an ROS (Robot Operation System) based on Linux. The basic performance of the manufactured robot platform was verified through a water tank test, where the robot was manually operated using a joystick, and the robot motion and attitude variation that resulted from the manipulator movement were closely observed.

• Asian-Australasian Journal of Animal Sciences
• /
• 제32권3호
• /
• pp.405-412
• /
• 2019

Objective: This experiment was conducted to determine the chemical composition, digestible energy (DE) and metabolizable energy (ME) contents of corn germ meals (CGM) and to develop equations to predict the corresponding energy contents based on the chemical characteristics of individual CGM. Methods: Sixty-six barrows (initial body weight = $51.3{\pm}4.6kg$) were allotted to 11 diets including a basal diet and 10 CGM test diets in a completely randomized design. In the test diets, CGM was included in replacement of 30% of the energy-providing ingredients in the basal diet, resulting in a final inclusion rate of 29.1%. Each diet was fed to 6 barrows housed in individual metabolism crates for a 7-d acclimation period followed by a 5-d total but separate collection of feces and urine. Results: Considerable variation was observed in acid-hydrolyzed ether extract, ether extract, ash, calcium (Ca) and total phosphorus contents among the CGM samples. On dry matter (DM) basis, the DE and ME contents of the CGM ranged from 10.22 to 15.83 MJ/kg and from 9.94 to 15.43 MJ/kg, respectively. The acid detergent fiber (ADF) contents were negatively correlated with the DE and ME contents of CGM samples. The best-fit prediction equations for the DE and ME values (MJ/kg DM) of the 10 CGM were: DE = 26.85-0.28 insoluble dietary fiber (%)-17.79 Ca (%); ME = 21.05-0.43 ADF (%)-11.40 Ca (%). Conclusion: The chemical compositions of CGM vary depending on sources, particularly in ether extract and Ca. The DE and ME values of CGM can be predicted based on their chemical composition in growing pigs.

• Animal Bioscience
• /
• 제34권1호
• /
• pp.109-118
• /
• 2021

Objective: The objective of this study was to determine net energy (NE) of expeller-press (EP-RSM) and solvent-extracted rapeseed meal (SE-RSM) and to establish equations for predicting the NE in rapeseed meal (RSM) fed to growing pigs. Methods: Thirty-six barrows (initial body weight [BW], 41.1±2.2 kg) were allotted into 6 diets comprising a corn-soybean meal basal diet and 5 diets containing 19.50% RSM added at the expense of corn and soybean meal. The experiment had 6 periods and 6 replicate pigs per diet. During each period, the pigs were individually housed in metabolism crates for 16 days which included 7 days for adaption to diets. On day 8, pigs were transferred to respiration chambers and fed their respective diet at 2,000 kJ metabolizable energy (ME)/kg BW0.6/d. Feces and urine were collected, and daily heat production was measured from day 9 to 13. On days 14 and 15, the pigs were fed at 890 kJ ME/kg BW0.6/d and fasted on day 16 for evaluation of fasting heat production (FHP). Results: The FHP of pigs averaged 790 kJ/kg BW0.6/d and was not affected by the diet composition. The NE values were 10.80 and 8.45 MJ/kg DM for EP-RSM and SE-RSM, respectively. The NE value was positively correlated with gross energy (GE), digestible energy (DE), ME, and ether extract (EE). The best fit equation for NE of RSM was NE (MJ/kg DM) = 1.14×DE (MJ/kg DM)+0.46×crude protein (% of DM)-25.24 (n = 8, R2 = 0.96, p<0.01). The equation NE (MJ/kg DM) = 0.22×EE (% of DM)-0.79×ash (% of DM)+14.36 (n = 8, R2 = 0.77, p = 0.018) may be utilized to quickly determine the NE in RSM when DE or ME values are unavailable. Conclusion: The NE values of EP-RSM and SE-RSM were 10.80 and 8.45 MJ/kg DM. The NE value of RSM can be well predicted based on energy content (GE, DE, and ME) and proximate analysis.

• Animal Bioscience
• /
• 제35권5호
• /
• pp.648-658
• /
• 2022

Objective: The identification of nonlinear mixed models that describe the growth trajectory of New Zealand rabbits was performed based on weight records and carcass measures obtained using ultrasonography. Methods: Phenotypic records of body weight (BW) and loin eye area (LEA) were collected from 66 animals raised in a didactic-productive module of cuniculture located in the southern Piaui state, Brazil. The following nonlinear models were tested considering fixed parameters: Brody, Gompertz, Logistic, Richards, Meloun 1, modified Michaelis-Menten, Santana, and von Bertalanffy. The coefficient of determination (R²), mean squared error, percentage of convergence of each model (%C), mean absolute deviation of residuals, Akaike information criterion (AIC), and Bayesian information criterion (BIC) were used to determine the best model. The model that best described the growth trajectory for each trait was also used under the context of mixed models, considering two parameters that admit biological interpretation (A and k) with random effects. Results: The von Bertalanffy model was the best fitting model for BW according to the highest value of R² (0.98) and lowest values of AIC (6,675.30) and BIC (6,691.90). For LEA, the Logistic model was the most appropriate due to the results of R² (0.52), AIC (783.90), and BIC (798.40) obtained using this model. The absolute growth rates estimated using the von Bertalanffy and Logistic models for BW and LEA were 21.51g/d and 3.16 cm², respectively. The relative growth rates at the inflection point were 0.028 for BW (von Bertalanffy) and 0.014 for LEA (Logistic). Conclusion: The von Bertalanffy and Logistic models with random effect at the asymptotic weight are recommended for analysis of ponderal and carcass growth trajectories in New Zealand rabbits. The inclusion of random effects in the asymptotic weight and maturity rate improves the quality of fit in comparison to fixed models.

• 한국심리학회지 : 코칭
• /
• 제4권2호
• /
• pp.1-26
• /
• 2020

본 연구의 목적은 4년제 대졸 워킹맘이 겪는 심리적 어려움을 측정할 수 있는 척도를 개발하고 타당화를 검증하는 것이다. 연구 1에서는 문헌연구와 함께 경력의 단절이 없으며 학력이 4년제 대졸이상이고 미성년 자녀가 있는 맞벌이 워킹맘을 대상으로 인터뷰, 개방형 설문을 실시하였으며, 17개요인 69문항을 개발하였다. 연구 2에서는 워킹맘 306명에게 예비 조사를 실시하여 12개요인 64문항을 추출하였다. 연구 3에서는 638명에게 본조사를 실시하였으며 교차타당도 검증을 위해 638명을 임의로 두 집단으로 나누어 한 집단(G1)의 319명은 탐색적 요인분석을 실시하고 다른 집단(G2)의 319명은 확인적 요인분석을 실시하였다. G1으로 탐색적 요인 분석을 실시한 결과, 가족에 대한 미안함, 업무평가에서의 차별, 몸과 마음의 탈진, 불공평한 육아와 가사 부담, 도우미와의 갈등, 역량개발의 한계, 사회적 편견, 근태의 어려움 총 8개요인 48문항이 추출되었다. G2를 대상으로 확인적 요인분석을 실시한 결과 8개 요인구조의 부합도가 높게 나타나서 워킹맘 심리적 어려움 척도의 구성타당도가 입증되었다. 수렴타당도 검증을 위한 워킹맘 심리적 어려움과 다중 역할 부정경험의 상관이 유의미해 수렴타당도가 검증되었고 워킹맘 심리적 어려움과 준거변인인 삶의 만족, 조직몰입, 직무열의 모두와 유의미한 상관을 보여 준거관련타당도도 검증되었다. 이러한 결과를 토대로 본 연구 의의, 이론·실무적 시사점, 제한점과 향후 연구 방향 등에 관해 논의하였다.

• Journal of Nutrition and Health
• /
• 제48권2호
• /
• pp.180-191
• /
• 2015

본 연구는 만 9~12세의 초등학생 총 20명(남아 11명, 여아 9명)을 대상으로 18가지의 일상생활에서의 대표적인 신체활동에 따른 에너지소비량을 측정하여, 아동의 일상생활에서 수행하는 신체활동에 따른 에너지소비량을 평가하고, 체중이 METs 값에 미치는 영향을 분석해보았다. 1. 연구대상자의 평균연령은 $10.4{\pm}0.6$세였으며, 평균 신장 및 체중은 $145.1{\pm}8.5cm$ 및 $43.6{\pm}10.3kg$ 이었다. 대상자의 허리둘레는 남아와 여아 각각 $73.6{\pm}9.6cm$ 및 $63.5{\pm}7.1cm$로 남녀 간의 유의한 차이를 보였다 (p < 0.05). 2. 연구대상자의 휴식 시 산소소비량 ($VO_2$), 에너지소비량 및 METs 값은 각각 $5.41{\pm}0.89mL/kg/min$, $1.44{\pm}0.17kcal/kg/h$ 및 $1.5{\pm}0.4METs$로 나타났다. 3. 18가지의 신체활동에 따른 METs 값은 앉아서 숙제하기 및 책읽기 ($1.6{\pm}0.3METs$), 앉아서 비디오 혹은 핸드폰으로 게임하기 ($1.6{\pm}0.5METs$), 앉아서 텔레비전 시청하기 ($1.7{\pm}0.5METs$), 서서 비디오 혹은 핸드폰으로 게임하기 ($1.9{\pm}0.6METs$), 빗자루로 방 쓸기 ($2.7{\pm}1.1METs$) 및 보드게임 ($2.8{\pm}2.2METs$)이 가벼운 신체활동에 속하였으며, 진공청소기로 청소하기 ($3.0{\pm}0.2METs$), 피구 ($3.6{\pm}0.9METs$), 삽질하기 ($3.8{\pm}0.4METs$), 계단오르내리기 ($3.8{\pm}1.3METs$), 농구 슛팅 ($4.4{\pm}.1.5METs$), 줄넘기 ($4.6{\pm}2.6METs$), 음악에 맞추어 스트레칭 ($4.7{\pm}2.3METs$), 천천히 걷기 ($4.8{\pm}2.6METs$) 및 배드민턴 ($4.8{\pm}1.0METs$)의 활동이 중간강도의 신체활동에 속하였다. 빨리 걷기 및 달리기는 각각 $6.6{\pm}1.7$ 및 $6.7{\pm}1.5METs$로 6.0 METs 이상의 고강도 신체활동에 속하는 것으로 나타났다. 4. 본 연구결과를 성인 METs 값 및 기존에 보고된 아동 METs 값과 비교하기 위하여 Bland-Altman 분석을 실시한 결과 각각 mean difference $0.18{\pm}1.57$, upper and lower limit of agreement 0.99 and -0.62 및 mean difference $0.28{\pm}1.49$, upper and lower limit of agreement 1.05 and -0.48로 나타났으며, ICC (interclass correlation coefficient)를 통한 일치도 분석결과는 각각 0.815 및 0.837로 성인의 METs 값보다는 기존에 보고된 아동 METs 값과의 일치도가 더 높은 것으로 나타났다. 5. 체중이 신체활동에 따른 에너지소비량에 미치는 영향을 살펴본 결과, 앉아서 게임하기 (METs 1.6), 계단오르내리기 (METs 3.8), 천천히 걷기 (METs 4.8) 및 달리기 (METs 6.6)에서 $R^2$값이 각각 0.116, 0.176, 0.246 및 0.455로 증가하였으며, 활동 강도가 높을수록 체중이 METs 값에 대한 설명력이 증가함을 알 수 있었다. 신체활동은 건강증진 및 질병예방에 중요한 역할을 하며, 특히, 일상생활에서 신체활동을 증진시키는 것은 많은 질병에 있어 최선의 예방책 가운데 필수적인 요소이다. 이러한 면에서 영양 및 운동처방의 목표에 정확하게 도달하기 위해서는 에너지소비량, 특히, 일상생활에서의 신체활동이 정확하게 평가되어져야한다. 결론적으로, 신체활동에 따른 에너지소비량을 평가하기 위해 성인의 데이터가 존재할지라도 아동들의 일상적인 활동에 대한 에너지 cost 자료는 부족한 실정이다. 이에 본 연구는 초등학생의 신체활동에 따른 에너지소비량에 대한 데이터를 직접 측정하여 평가하였다는데 큰 의의가 있으며, 추후 연구에서는 더 넓은 범위의 그룹 및 다양한 연령대의 아동을 대상으로 한 연구가 이루어져야 할 것이다.