• Journal of the Korean Society of Clothing and Textiles
• /
• v.34 no.3
• /
• pp.480-491
• /
• 2010

This study investigates the body satisfaction and fitness apparel depending on age and silhouette. The subjects were 254 females 20~50 years of age living in Chungju South Korea. There are various body types in women over the age of 35, the lower part of the body-development type, regular type, the upper part of the body-development type, and the rectangular body type. In addition, there is a lower satisfaction level in circumferences related with apparel fit, especially in the sleeve length, armhole, and crotch length. Therefore, a size system is needed that considers various body types in ready-to-wear clothing for middle-aged women. Design, color, and pattern are most important in clothing purchases by unmarried women, but the ease of laundry management and price discounts are the most significant for clothing purchases by married women. The upper part of the body-development type is unsatisfactory in the size-fit of sleeve length and shoulder width, but the lower part of the body-development type is unsatisfactory in the circumference of the waist, hip, abdominal, girth of skirt, and crotch length. The rectangular body type and the lower part of the body-development type are unsatisfactory in movement comfort, especially in hip girth and crotch length. The upper part of the body-development type is unsatisfactory in the movement comfort of the chest and elbow girth.

• The Research Journal of the Costume Culture
• /
• v.26 no.3
• /
• pp.313-326
• /
• 2018

Over the past few years, companies have started moving into specific niches in plus-size fashion. The purpose of this study was to verify the marketability of young plus-size clothes in the USA. Data were collected from female consumers aged from 20 to 39 who have experience of purchasing plus-size items. A total of 282 responses were used for statistical analysis. The research result is as follows. First, the obesity stress is affected more by the subjective obesity level than by the objective obesity level and by how people recognize their body types. Second, from an analysis of the factors affecting the shopping orientation of plus-size consumers, style consciousness, pursuing reasonable, emphasizing comfort, and body consciousness are found to be important factors. Third, even if responders are aware of their exact body size, they actively look for the correct size. Fourth, fit evaluation of plus-size products is based on the factors of size fit and movement fit. The respondents were unsatisfied with chest and arm measurements, which deviate widely by body type for tops. Fifth, the overall dissatisfaction with the plus-size market is attributed to the fact that the product assortment range from which to select styles is narrow, and trend reflection is low. Sixth, the respondents tended to avoid fabrics that make their body type more obvious, textures that give the impression of a larger body size, or stiff textures. These results show that the psychological and physical characteristics of obese consumers should be considered to develop products for the young plus-size market.

• The Research Journal of the Costume Culture
• /
• v.19 no.1
• /
• pp.214-229
• /
• 2011

The purpose of this study is to find strategic methods of quality management for customer satisfaction when developing clothing for middle and elderly women. For this study was middle and elderly women who were living in Seoul and Kyonggi-do. SPSS 11.5 statistical program was used for data analysis and to conduct factor analysis, reliability verification, paired-sample t-test, frequency analysis and percentage. The result were as follows; First, middle and elderly women's behavioral characteristic in purchasing clothing, the average price of formal suit was 700 thousand won and the time for purchasing was less than 3 months. They tended to purchase mostly by themselves on their own, and they purchase their own formal suit. Second, The body parts that influence the fit the most are in the order of waist circumference, shoulder width, chest circumference. Third, Regarding the difference of importance and satisfaction on the fit by body part that the middle and elderly women by body part, there was no significant different in neck circumference and shoulder swerve. Overweighing middle and elderly women showed difference in importance and satisfaction on all body parts. Underweighing middle-aged to aged women showed a significant difference in importance and satisfaction in the order of circumference of hips. Fourth, middle-aged women in 50s showed higher importance than satisfaction in the order of waist circumference, and elderly women in 60s should higher importance than satisfaction in rise length, jacket length. Aged women in 70s and above should significant difference only in the height of collar.

• Journal of the Korean Society of Costume
• /
• v.57 no.8
• /
• pp.48-59
• /
• 2007

The purpose of this research is to develop a basic pattern of corset look taking into consideration characteristics of human body and fit, by transforming 3 dimensional information obtained from draping of standard body type of women in their 20s, which constitute the biggest consumer group of corset look in Korea, on the basis of body shape of women best reflecting 3 dimensional characteristics. In order to develop a corset look pattern suitable for standard body type of women in their 20s, wear tests of A, B, and C types of patterns in terms of the bust in the standard body type that bust circumference 86.7cm and chest circumference 87.0cm were evaluated best. Taking into consideration above findings, fer the purpose of developing a corset look pattern having an excellent fit and reflecting characteristics of Korean women in their 20s with standard body type, a corset look pattern was designed with proper ease calculated by draping incorporated, and through alteration and complementation of such a pattern, a study pattern was produced. This study is expected to provide tips for standard body type women in their 20s with smaller bust circumference to choose clothing allowing for a better fit able to make up for weakness of their body, while presenting to clothing makers ways of designing and size-setting in terms of characteristics of body type of these consumers.

• Fashion & Textile Research Journal
• /
• v.18 no.2
• /
• pp.216-224
• /
• 2016

Recently, the interest in a garment that accentuates a fit and slender body continues to be highly desirable. Customers frequently want to wear a slim designed jacket that fits well, reflecting the trends of being young and slim. Accordingly, this research collected information on brands with ready-to-wear slim fit tailored jackets that target female customers in their 30s. By identifying the jacket pattern design and production state by brand, and evaluating the appearance when wearing the jacket, I was able to draw up the following conclusions. First, the fit highlights many problems because of the difference between the model size of brands that targeted domestic women in their 30s and the standard somatotype of them. This can be solved by considering the somatotype of women in their 30s when choosing the models. Second, the relative simplicity of the pattern should allow a slim fit tailored jacket to be produced that fits the front, back and side well. This would lead to the development of a jacket that would fit better as well as allowing for ease of movement. Similar to this, the model size of domestic brands changes frequently and customers prefer the size of a slim model instead of the size suitable for a target's somatotype. This results in a limit on the levels of satisfaction regarding brand targets for body types. Accordingly, it is hoped that this research will become the standard data for the development of a slim fit tailored jacket that will fit women in their 30s well.

• Journal of Fashion Business
• /
• v.26 no.3
• /
• pp.116-137
• /
• 2022

The purpose of this study was to develop jacket patterns that could fit well for women in their 20s with turtle neck syndrome body shape and to present a pattern drafting method. As a research method, an educational pattern was chosen through a preliminary experiment. Fit problems of the educational pattern were derived by wearing it on a virtual model with a turtle neck syndrome body type for each neck angle. Based on the three types of experimental patterns developed by supplementing these problems, a development pattern drafting method was developed for each neck angle. Three development patterns were compared and evaluated with the educational pattern using 3D virtual fitting. Fit problems of the educational pattern included: 1) insufficient ease amounts for hip, hem, bicep, elbow, and sleeve hem circumference; 2) horizontal items could not be leveled due to insufficient back length; 3) the shoulder line went backwards; and 4) the front center line did not form a vertical line. To solve these problems, an experimental pattern was developed by increasing the insufficient ease amount, increasing the insufficient back length, and correcting the position of the shoulder line. Measurements that differed in the pattern drafting method of the three types of development patterns by neck angle were positions of back center line and back neck point, front length, and front neck width. Through appearance evaluation of the development pattern and educational pattern by neck angle, the development pattern was highly evaluated, indicating that problems of the educational pattern were improved.

• The Research Journal of the Costume Culture
• /
• v.31 no.5
• /
• pp.586-606
• /
• 2023

This study initiated research aligned with the body positivity movement, aiming to explore size diversity for groups facing relative size discrimination due to their deviation from average body types. Using KS adult women's apparel dimensions as a reference, jackets were developed for women in their 20s to 30s who belong to the small petite-size (S[P]) category, which is characterized by a height under 155cm (petite) and a bust-circumference from 72cm to less than 82cm (small). Using 3D virtual-fitting, we conducted experiment-pattern production and refinement and subsequent real-fitting evaluations by participants to objectively validate aesthetics and comfort. The study's findings are as follows: First, utilizing a 3D virtual-fitting program by identifying 'creases' and 'garment pressure points' in the jacket appearance, experiment patterns were refined and real jackets were produced. This approach addressed challenges in recruiting participants with specific body types and allowed for efficient research in terms of cost and time. Second, through real-fitting evaluations, basic-fit and slim-fit jackets labeled as <79-88-150> were developed for the S(P) size. we presented 'size spec' and 'ease allowance' for jackets by waist fit. Both fits received positive evaluations with approximately 53.5cm sleeve length, and 11.7cm shoulder length. The ease allowances for the basic-fit jacket were approximately 9.2cm at the bust circumference, 12.8cm at the waist circumference, and 6cm at the hip circumference. Similarly, the slim-fit jacket exhibited ease allowances of about 4.8cm at the bust circumference, 4cm at the waist circumference, and 4cm at the hip circumference, receiving positive evaluations for aesthetics and comfort.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.35 no.12
• /
• pp.1454-1465
• /
• 2011

Menswear body types are often labeled on garments (to indicate how the garments are designed to fit) with indicators of a size category such as regular, portly, and stout, athletic, or big and tall. A drop (relationships between the chest and waist girths) is related to the fit of a tailored suit. However, current standards are not designed for various drops or body types. There is not enough information of categorizing men's body shapes for the apparel sizing systems. In this article, a set of men's data from SizeUSA sizing survey was analyzed to investigate men's body shapes and drops. Factor analysis and a cluster analysis method were used to categorize men's body shapes. In the results, twenty-five variables were selected through the factor analysis and found four factors: girth factor, height factor, torso girth factor, and slope degree factor. According to the factor and cluster analysis, various body shapes were found: Slim Shape (SS - tall ectomorphy), Heavy Shape (HS - athletic, big & tall, endomorphy and mesomorphy), Slant Inverted Triangle Shape (SITS - regular, slight ectomorphy and slight mesomorphy weight range from normal to slightly overweight), Short Round Top Shape (SRTS - portly and stout, endomorphy). Body shapes were related to fitting categories. SS and HS were related to big & tall fitting category. SITS was related to regular. SRTS was related to portly and stout. Shape 1 (31%) and Shape 2 (26%) were related to current big & tall category. Shape 3 (34%) were related to regular. Shape 4 (9%) were in portly and stout category. ASTM D 6240 standard was the only available standard that presented a regular fitting category. Various drops were found within a same chest size group; however, this study revealed great variances of drops by body shape.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.32 no.2
• /
• pp.271-283
• /
• 2008

The purpose of this study is to provide information on how to improving wearing sensation and fit of boots-cut jean through analysis of the actual wearing conditions and dissatisfaction. In order to compile the information about dissatisfaction with the appropriateness of the fit of boots-cut jean, a questionnaire was administered to 150 females(between the ages of 20 and 39) living in Gwang-ju, analyzed using the SPSS WIN 12.0 program. Also, 6 blue jean manufactures were investigated, the study method was a interview about company present status, sizing system and pattern of boots-cut jean. The result of this study were as follow: 1. In wearing conditions, the 20's(51.6%) to 30's(69.1%) is found the best preferred jean is boots-cut style. The reason why consumers prefer boots-cut jeans with wearing fit does to seem charming bodyline of the adult female. 2. Body type groups by drop was classified with the usual waist, the thick waist, the thin waist. The differences among age groups, body type and so on were compared using the chi-square test. Dissatisfaction of the fit of the thick waist and the thin waist was higher than the usual waist. 3. Research on the production sizing system of 6 blue jean brands showed the total sizing system of each manufacture were $3{\sim}9$, they were reflected the sizing system of the korean Industrial Standards(KS K 0051). Therefore, it is considered necessary for boots-cut jeans pattern and sizing system for Korean consumer's body shape.

• Journal of Technologic Dentistry
• /
• v.42 no.2
• /
• pp.81-89
• /
• 2020

Purpose: This in vitro study was conducted to evaluate the marginal and internal fit of three-unit Co-Cr frameworks fabricated by computer-aided metal milling and direct metal laser sintering(DMLS) systems in comparison to conventional casting method. Methods: Three-unit Co-Cr frameworks were fabricated by conventional wax up with casting(CWC), computer-aided metal milling(MM) and direct metal laser sintering(DMLS)(n=10 each). The marginal and internal fit of specimens were examined using a light-body silicone impression material. The thickness of light-body silicone was measured at eight reference points each, divided in the mesio distal and bucco lingual directions. All measurements were conducted by a stereomicroscope. Digital photos were taken at 150× magnification and then analyzed using a measurement software. The Kruskal-Wallis test and Bonferroni correction were used for analyzing the results. Results: The mean(SD) is ㎛ for fabrication methods, the mean marginal fit were recorded respectively, DMLS 39(27), followed by CWC 63(38), MM 220(128). and the mean internal fit CWC 95(47), DMLS 116(49), MM 210(152). In addition, the largest gap was found in the occlusal surface area among the internal measurement areas of all groups. Conclusion: As a result, the direct metal laser sintering method showed better marginal and internal fit than the metal milling method. The marginal and internal fit were statistically different according to the three fabrication methods(p<0.001). Except the MM group, the marginal fit of the CWC and DMLS groups was below the clinical standard of 120 ㎛. Based on the results of this study, it can be applied to clinical use in the future.